Stroker87

hey guys finally got my nitrous installed and car was on the dyno today making sure every thing was all good wanted to know how much did a 100 shot lower your ET's? can you post your N/A time & nitrous time


my best was 11.21 @ 122mph 1.50 60ft. just curious what 100 shot can do?

i have a progressive controller that i need to play with the starting % & ramp rate and see if car will handle it coming on in 1st at all, how do you guys have your controllers set up?

sorry never played with nitrous at all before this is all new for me

Robert

Smoove

100hp=10mph give or take a mph. Et would depend on traction but with a 1.5 you'd knock off a few tenths and be in the mid 10s.

Stroker87

i had some one say only 3 or 4 tenths off? if this thing only runs 10.8x / 10.9x after a 100 shot thats depressing i'd be happy with a 10.5x / 10.6x though

Smoove

All about that first 60ft. I think a mid 10 is attainable.

Big Jt

100 shot is so small, why even mess with a progressive controller. If you have traction issues, fix that.

Stroker87

i'm really just shooting for a mid 10 second pass i have jets for 125 & 150 but thought it be better to start at 100 get a feel for it and learn how to setup the controller and if needed work up from there 150 would be probably max i would go since its a stock bottom

luvTTwins

11.6 intake only c5z
10.6 on a 125 shot, but also got a tune and a 3.90 rear.
I sprayed right off the line, low 1.5 60s

Stroker87

what % do you start at and how fast do you ramp it to 100%?

luvTTwins

I never installed my fjo controller. I wanted to try a 75ish shot for the first half of first gear to see if I could help my 60 time.

100% right out of the gate

Stroker87

what RPM you launching at? manual or auto?

luvTTwins

Stick, monster stage 3
Probably 3800 on my lnc 2000 2step.

https://www.dropbox.com/s/7zvr5tjf0zr17cu/10.6.MOV?dl=0

Stroker87

nice pass!

i have monster stage 2, c6 upgrades 3.73 my 1.50 60ft was a 5k launch witch i dont think i'll be doing again lol

i might try 100% at a lower launch next time at the track, i didnt even connect the 2step function yet

luvTTwins

I wouldn't launch under 3500 with the spray. The initial torque spike is huge, and I don't like to spray much below 4k. Manufacturers say 3k, but most of the time there is no point in my opinion.

The 2 step is nice just to let you focus on everything else. But that car still has cats, so that's why I hover right below until I'm about to launch.