Mexico racers step in...
#21
Race Director
Member Since: Mar 2006
Location: Everywhere and Nowhere at all
Posts: 15,357
Received 1,679 Likes
on
1,135 Posts
I'm @ 800ft lbs of Tq and my MT ET Streets do just fine.. 345/35/18
Last edited by TXGS507; 09-01-2016 at 08:59 AM.
#22
I'm @ 800ft lbs of Tq and my MT ET Streets do just fine.. 345/35/18
https://www.youtube.com/watch?v=64rM5698FhY
https://www.youtube.com/watch?v=Ga2Kp8kfa7Q
https://www.youtube.com/watch?v=64rM5698FhY
https://www.youtube.com/watch?v=Ga2Kp8kfa7Q
beastly car. looks like you're launching in 2nd and going WOT in 3rd? tough to hear with the wind but looks like then winding out 4th gear all the way to the end.
#23
Race Director
Member Since: Mar 2006
Location: Everywhere and Nowhere at all
Posts: 15,357
Received 1,679 Likes
on
1,135 Posts
#24
thanks. On 17" ET street R i can hook up 100% of 900whp/860tq and also found i was a few mph faster. Really wish there was some way to hook up 90-100% WOT In 2nd on the street but seems like without going to 15" tire probably not possible
#27
sorry, i should have added "can hook up 100% of THIRD GEAR" meaning i can't hook up 2nd at all on the street which I would like to build the car to do if it is possible at all on a 17" tire.
15" conversion not really in the cards
tire size on my MT ET street R tires are 305/45/17
15" conversion not really in the cards
tire size on my MT ET street R tires are 305/45/17
#28
Race Director
Member Since: Mar 2006
Location: Everywhere and Nowhere at all
Posts: 15,357
Received 1,679 Likes
on
1,135 Posts
Just yesterday I saw on Craigslist where a guy is selling a set of 15in WELD S71 wheels Custom made for his C5.... If I didn't have flared fenders i'd buy em!!!
#30
Melting Slicks
Thread Starter
The biggest obstacle is dishing out $1700 for a pair of spindles.
#31
Instructor
Member Since: Jan 2013
Location: Dieppe New Brunswick
Posts: 180
Likes: 0
Received 10 Likes
on
8 Posts
remember it could be worse you could be buying spindles with canadian pesos LOL i still dont wanna add up what i cost me for the new wheels and tire setup
edit... i just noticed your in canada too lol . so you get to pay an extra 30points too lol
Last edited by Tipot; 09-08-2016 at 12:14 PM.
The following users liked this post:
Jason913 (09-09-2016)
#33
#38
Race Director
Member Since: Mar 2006
Location: Everywhere and Nowhere at all
Posts: 15,357
Received 1,679 Likes
on
1,135 Posts
Verrrry nice... Keep us posted!! Lets see em mounted up...
#39
Race Director
Member Since: Mar 2006
Location: Everywhere and Nowhere at all
Posts: 15,357
Received 1,679 Likes
on
1,135 Posts
My car goes back under the knife here in a couple of weeks ( Wann go fast is coming up).. I hope to have right at these numbers.
Very nice!
Very nice!
#40
thanks, with iron block LSX and all the options my car is a heavy pig though and with turbo you should be faster. 900whp street car with heated seats, AC and nav is not bad though honestly anything at 500whp+ though is starting to get really gnarly for a street car!
Vetteski:
really interested to hear your feedback on the 15" tire conversion. if those can dead hook 2nd on the street I may have to pony up for the conversion once my 17" tires wear out.