Houston, Tx area help with nitrous
#1
Instructor
Thread Starter
Houston, Tx area help with nitrous
I have a h/c c5 zo6 with a fresh rebuild that made 472/435 through 4.10s (I have 3.42s now) and I'm looking for some nitrous guys in my area that would be interested in helping me tune a nitrous outlet wet kit and look over my install. I've done alot of research over the years and just spoke with the guys at nitrous outlet again today but I'm still a little nervous about the spray. lol
Last edited by just inc; 08-25-2016 at 01:08 PM.
#4
Instructor
Thread Starter
Ok guys thanks for all the pm's! I found a used Ls1 Maf kit, nos mini controller and plc wideband on craigslist list. I was installing it last night but found out my maf sensor is to big and won't line up properly so I have to figure out another option. I like the idea of having a hidden system and I'm only looking for 100-150 shot for now so I'm thinking about getting a dry nozzle and spraying before my maf sensor. What do you guys think? Below is a list of what I have now
Nitrous Express MAF Kit
This kit replaces you're stock MAF housing
97-06 Camaro,Firebird,C5 vette,CTS V1 & GM Trucks 10lb NX bottle & brackets
Nitrous outlet heater w/temperature switch NX Carbon fiber solenoids NX Maf housing for 2 stages Nitrous outlet purge
-4 main feed & fuel line
Solinoied to fogger lines
50-150 hp jets
Nitrous gauge
Ngk Br7 plugs
Nos mini progressive controller
PLX Wideband brand new w/45 degree bung
Nitrous Express MAF Kit
This kit replaces you're stock MAF housing
97-06 Camaro,Firebird,C5 vette,CTS V1 & GM Trucks 10lb NX bottle & brackets
Nitrous outlet heater w/temperature switch NX Carbon fiber solenoids NX Maf housing for 2 stages Nitrous outlet purge
-4 main feed & fuel line
Solinoied to fogger lines
50-150 hp jets
Nitrous gauge
Ngk Br7 plugs
Nos mini progressive controller
PLX Wideband brand new w/45 degree bung