LAPD Impounded My Corvette Today! Ahhh !#*%$@
#1
Team Owner
Thread Starter
LAPD Impounded My Corvette Today! Ahhh !#*%$@
NOT WHAT YOU THINK!
That is: THEEE! L.A.P.D and only after my base dyno runs!
My '98 has: VARARAM, Hypertech Tune (Tweaked by Doug the tuner @ LAPD), Ported and Polished TB, HighFlow Air Bridge(LAPD's), Large 85mm MAF Housing, IAT Sensor Relocate, LS6 Manifold, A4 with 3:15's and I pulled on the DYNOJETGet this)
DYNO RUN:322.45 RWHP 327.96 RWTQ
Not Bad for an A4 with stock Converter! (I'm pretty dang happy!)
Watch it here if you will: http://s83.photobucket.com/albums/j3...t=100_1583.flv
We did this today WHY? You ask WHY? :
This is to start the project "The Beast" ( Nickname Curtousy of me ): TFS Heads, Custom ground one piece billet Cam, New Roller Rockers, K@@Ks Long Tube Headers, Hiflow Cats, X-pipe and Dyno Tune
Numbers to come SO stay tuned! HAHHH! HAHHHH! HEEE! HEEE! I am happy!
I want to know your thoughts on my Dyno Run, Let me know! Thanks Fella's
Thanks,Matt (and a HAPPY Matt at that! )
That is: THEEE! L.A.P.D and only after my base dyno runs!
My '98 has: VARARAM, Hypertech Tune (Tweaked by Doug the tuner @ LAPD), Ported and Polished TB, HighFlow Air Bridge(LAPD's), Large 85mm MAF Housing, IAT Sensor Relocate, LS6 Manifold, A4 with 3:15's and I pulled on the DYNOJETGet this)
DYNO RUN:322.45 RWHP 327.96 RWTQ
Not Bad for an A4 with stock Converter! (I'm pretty dang happy!)
Watch it here if you will: http://s83.photobucket.com/albums/j3...t=100_1583.flv
We did this today WHY? You ask WHY? :
This is to start the project "The Beast" ( Nickname Curtousy of me ): TFS Heads, Custom ground one piece billet Cam, New Roller Rockers, K@@Ks Long Tube Headers, Hiflow Cats, X-pipe and Dyno Tune
Numbers to come SO stay tuned! HAHHH! HAHHHH! HEEE! HEEE! I am happy!
I want to know your thoughts on my Dyno Run, Let me know! Thanks Fella's
Thanks,Matt (and a HAPPY Matt at that! )
Last edited by madmatt9471; 06-04-2007 at 09:25 PM.
#2
Burning Brakes
Awsome film .......And since I was standing there to see it.
Makes it even better............
Also, I gave Al a deposit on the work I'm going to have done
in about 3 weeks, when the parts get there........Not quite as aggressive as you. But,
enough for an old guy
Makes it even better............
Also, I gave Al a deposit on the work I'm going to have done
in about 3 weeks, when the parts get there........Not quite as aggressive as you. But,
enough for an old guy
#4
Team Owner
Thread Starter
C5 Ron it was good meeting you and thanks for then compliment you too will enjoy your new COMBO!
PeterPan Man! I can't wait! Better than ever!
Thanks,Matt
PeterPan Man! I can't wait! Better than ever!
Thanks,Matt
#7
Team Owner
Thread Starter
We are going to use the stock TQ Converter! We are shooting for 430 RWHP!
It will be awesome! All done with a stock TQ Converter! and totally streetable!
It was what I wanted to do with my set-up to reach my goals that I had in mind when we put this package together!
Thanks,Matt
It will be awesome! All done with a stock TQ Converter! and totally streetable!
It was what I wanted to do with my set-up to reach my goals that I had in mind when we put this package together!
Thanks,Matt
#9
Team Owner
Thread Starter
#10
Pro
Member Since: Mar 2007
Location: Mission Viejo CA
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
Hey Matt
It's finally time to build the beast
Way cool, good luck.
Ya know I'm really happy with my set up since I got impounded by the LAPD Remember these numbers?....340 RWHP/354RWTQ
I know my vararam, ported and polished T/B and borla, tuned by Doug will not be in the same zip code as the "Beast" so you know I'm thinkinn of the next plan. Tell Al and the crew hello from me
Congrats dude and I can't wait to see (and hear) the beast
savage1
It's finally time to build the beast
Way cool, good luck.
Ya know I'm really happy with my set up since I got impounded by the LAPD Remember these numbers?....340 RWHP/354RWTQ
I know my vararam, ported and polished T/B and borla, tuned by Doug will not be in the same zip code as the "Beast" so you know I'm thinkinn of the next plan. Tell Al and the crew hello from me
Congrats dude and I can't wait to see (and hear) the beast
savage1
#11
Team Owner
Thread Starter
Hey Matt
It's finally time to build the beast
Way cool, good luck.
Ya know I'm really happy with my set up since I got impounded by the LAPD Remember these numbers?....340 RWHP/354RWTQ
I know my vararam, ported and polished T/B and borla, tuned by Doug will not be in the same zip code as the "Beast" so you know I'm thinkinn of the next plan. Tell Al and the crew hello from me
Congrats dude and I can't wait to see (and hear) the beast
savage1
It's finally time to build the beast
Way cool, good luck.
Ya know I'm really happy with my set up since I got impounded by the LAPD Remember these numbers?....340 RWHP/354RWTQ
I know my vararam, ported and polished T/B and borla, tuned by Doug will not be in the same zip code as the "Beast" so you know I'm thinkinn of the next plan. Tell Al and the crew hello from me
Congrats dude and I can't wait to see (and hear) the beast
savage1
I mean it's going to be awesome and a killer package!
I will get an update tomarrow when i call to see how far we are along!
I'll keep everyone up to date!
Thanks,Matt
#12
Melting Slicks
Hey MadMatt... Sorry I missed you. I just had my car "impounded" at the good 'ole L.A.P.D last week. They set me up with Kooks Long tube headers/x-pipe/mid-pipes, a replaced catback, and a smaller supercharger pulley which amounted to 580HP
Yep... Al, Shawn, and the crew are a good bunch of fellas.
-Matt
Yep... Al, Shawn, and the crew are a good bunch of fellas.
-Matt
#13
Safety Car
Member Since: Apr 2005
Location: SFV CA
Posts: 4,769
Likes: 0
Received 0 Likes
on
0 Posts
Matt,
It was a pleasure finally meeting you at LAPD, I've read many of your enthusiastic threads/posts...your are an exciting individual in person as well.
Your car has genuine beauty and best of luck with your modding endeavors.
You've chosen a great shop to get the work done and I hope to see you soon at LAPD!!!
Cheers,
Richard
It was a pleasure finally meeting you at LAPD, I've read many of your enthusiastic threads/posts...your are an exciting individual in person as well.
Your car has genuine beauty and best of luck with your modding endeavors.
You've chosen a great shop to get the work done and I hope to see you soon at LAPD!!!
Cheers,
Richard
#16
NOT WHAT YOU THINK!
That is: THEEE! L.A.P.D and only after my base dyno runs!
My '98 has: VARARAM, Hypertech Tune (Tweaked by Doug the tuner @ LAPD), Ported and Polished TB, HighFlow Air Bridge(LAPD's), Large 85mm MAF Housing, IAT Sensor Relocate, LS6 Manifold, A4 with 3:15's and I pulled on the DYNOJETGet this)
DYNO RUN:322.45 RWHP 327.96 RWTQ
Not Bad for an A4 with stock Converter! (I'm pretty dang happy!)
Watch it here if you will: http://s83.photobucket.com/albums/j3...t=100_1583.flv
We did this today WHY? You ask WHY? :
This is to start the project "The Beast" ( Nickname Curtousy of me ): TFS Heads, Custom ground one piece billet Cam, New Roller Rockers, K@@Ks Long Tube Headers, Hiflow Cats, X-pipe and Dyno Tune
Numbers to come SO stay tuned! HAHHH! HAHHHH! HEEE! HEEE! I am happy!
I want to know your thoughts on my Dyno Run, Let me know! Thanks Fella's
Thanks,Matt (and a HAPPY Matt at that! )
That is: THEEE! L.A.P.D and only after my base dyno runs!
My '98 has: VARARAM, Hypertech Tune (Tweaked by Doug the tuner @ LAPD), Ported and Polished TB, HighFlow Air Bridge(LAPD's), Large 85mm MAF Housing, IAT Sensor Relocate, LS6 Manifold, A4 with 3:15's and I pulled on the DYNOJETGet this)
DYNO RUN:322.45 RWHP 327.96 RWTQ
Not Bad for an A4 with stock Converter! (I'm pretty dang happy!)
Watch it here if you will: http://s83.photobucket.com/albums/j3...t=100_1583.flv
We did this today WHY? You ask WHY? :
This is to start the project "The Beast" ( Nickname Curtousy of me ): TFS Heads, Custom ground one piece billet Cam, New Roller Rockers, K@@Ks Long Tube Headers, Hiflow Cats, X-pipe and Dyno Tune
Numbers to come SO stay tuned! HAHHH! HAHHHH! HEEE! HEEE! I am happy!
I want to know your thoughts on my Dyno Run, Let me know! Thanks Fella's
Thanks,Matt (and a HAPPY Matt at that! )
I've never seen so many smileys used in one post. Oh, and nice car by the way
#17
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 342,734
Received 19,234 Likes
on
13,933 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Best of luck with your new project.
#18
Team Owner
Thread Starter
Matt,
It was a pleasure finally meeting you at LAPD, I've read many of your enthusiastic threads/posts...your are an exciting individual in person as well.
Your car has genuine beauty and best of luck with your modding endeavors.
You've chosen a great shop to get the work done and I hope to see you soon at LAPD!!!
Cheers,
Richard
It was a pleasure finally meeting you at LAPD, I've read many of your enthusiastic threads/posts...your are an exciting individual in person as well.
Your car has genuine beauty and best of luck with your modding endeavors.
You've chosen a great shop to get the work done and I hope to see you soon at LAPD!!!
Cheers,
Richard
The pleasure also was mine meeting you and seeing your Vette.
That thing is a true BEAST and your profession is noble and you and your family should be congradulated for their efforts and keeping it going!
Hope to hang out and around again! See you at LAPD (The Impound Yard )
Thanks,Matt
#19
Team Owner
Thread Starter
Thanks to:
C5Ron
Peter Pan
Blazeone
Always 717
Roushraven
Savage1
Z06ster
FactoryRacecar
2klude
The California Kid
Jds00Pewter Coupe
and thanks to all at LAPD and the Fella's here on the FORUM who truelly make the Vette World "ROCK"
Thanks,Matt
C5Ron
Peter Pan
Blazeone
Always 717
Roushraven
Savage1
Z06ster
FactoryRacecar
2klude
The California Kid
Jds00Pewter Coupe
and thanks to all at LAPD and the Fella's here on the FORUM who truelly make the Vette World "ROCK"
Thanks,Matt