Notices
C5 General General C5 Corvette and C5 Z06 Discussion not covered in Tech
Sponsored by:
Sponsored by:

Genuine Italian leather shift boots - custom made for your car!

Thread Tools
 
Search this Thread
 
Old 03-21-2008, 07:11 AM
  #1  
RedlineGoods.com
Supporting Vendor
Thread Starter
 
RedlineGoods.com's Avatar
 
Member Since: Oct 2004
Location: Wilmington DE
Posts: 4,040
Received 142 Likes on 89 Posts
St. Jude Donor '07,-'13

Default Genuine Italian leather shift boots - custom made for your car!

Hello everyone,

We, RedlineGoods.com, are no stranger to the automotive industry. We have been providing our customers (now over 12 000) with QUALITY GENUINE ITALIAN LEATHER SHIFT BOOTS for 5+ years now. If you take pride in your ride - you will want to read this.

Has your shift boot seen better days?
Have you purchased a short shifter kit and the stock boot doesn't look good anymore or even hinders shifter travel?
Do you simply want to upgrade your stock vinyl pieces to finer leather?
Are you looking for the finishing touch to your custom interior?

Regardless of the reasons, RedlineGoods has a solution for you.

Starting with fine, buttery soft Italian leather, we will hand-craft new boots for your vehicle. The boots are made specifically for your model, so they fit your ride perfectly without any modification - unlike generic boots sold by others. See for yourself:


RedlineGoods has nothing to do with mass production. We're all about YOUR needs and YOUR car, which means a vast array of customization options.

These range from available materials (leather, carbon-fiber, faux-alcantara, perforated leater), through many color options (30+ colors of material and threads) to various finishing types (quadruple thread, two-tone, stripes and piping) - and we're open to even more custom arrangements. You can find our complete color chart by clicking here: http://www.redlinegoods.com/clrchart.shtm.

You can also order a re-sized shift boot for your short shifter or custom transmission setup, get the boot with the mounting bracket (where available) and order extra padding for your armrest cover. Or if you need a small design modification, for example in order to get your aftermarket shift **** to sit flush against your shift boot - we're the ones you should send an email to!

Our products are hand made to your order, shipped from Europe and arrive at your doorstep within two weeks from placing an order.

Our products have been discussed on many automotive forums and we frequently receive great customer comments. Just run a search on RedlineGoods on this forum to find out more about us, our products and our customer feedback.

Since, as the proverb goes, a picture is worth a 1000 words, here are some of them for your enjoyment. Click the link above them to go directly to our page dedicated to YOUR CAR, where you can easily order them with PayPal or your credit card!
Old 03-21-2008, 07:22 AM
  #2  
RedlineGoods.com
Supporting Vendor
Thread Starter
 
RedlineGoods.com's Avatar
 
Member Since: Oct 2004
Location: Wilmington DE
Posts: 4,040
Received 142 Likes on 89 Posts
St. Jude Donor '07,-'13

Default


























Last edited by RedlineGoods.com; 12-19-2009 at 01:06 PM.
Old 03-21-2008, 07:27 AM
  #3  
RedlineGoods.com
Supporting Vendor
Thread Starter
 
RedlineGoods.com's Avatar
 
Member Since: Oct 2004
Location: Wilmington DE
Posts: 4,040
Received 142 Likes on 89 Posts
St. Jude Donor '07,-'13

Default

C5 97-04 sun visor covers --> 159
C5 97-04 armrest cover --> 59
C5 97-04 (AUTO) shift boot --> 39
C5 97-04 (C6 shifter) shift boot --> 49
C5 97-04 (manual) shift boot --> 39
C5 97-04 ebrake boot --> 39
C5 97-04 door pull covers --> 39
C5 97-04 grab handle cover --> 19
C5 97-04 radio panel piping --> 19
C5 97-04 passenger airbag piping --> 19
C5 97-04 traction control strip --> 19

These are the retail prices. If you combine more than one product in an order, you can save up to 30% off these prices!

Last edited by RedlineGoods.com; 12-19-2009 at 01:17 PM.
Old 03-22-2008, 06:28 AM
  #4  
RedlineGoods.com
Supporting Vendor
Thread Starter
 
RedlineGoods.com's Avatar
 
Member Since: Oct 2004
Location: Wilmington DE
Posts: 4,040
Received 142 Likes on 89 Posts
St. Jude Donor '07,-'13

Default

Hello everyone,

as you can see, we've re-vamped our ads since some of them (we have over a hundred of them on various forums) were as much as 4 years old!

One of the first questions is always about the available colors. I hope this pictures explains it perfectly well!
http://www.redlinegoods.com/clrchart.shtm



Please remember that if you cannot decide without seeing the colors in person you can ORDER SAMPLES from us. For a mere $10 you'll get ALL the samples (a small swatch of each color) and, more importantly, if you actually order a product going by those, you'll get $5 of that reimbursed to you.

Here's the EASTER DISCOUNT CODE valid until Wednesday March 26th 5DHO624G8Y1.

Have a great day!
Maciek
Old 03-22-2008, 06:36 AM
  #5  
jdmvette
Night Owl for life
Support Corvetteforum!
 
jdmvette's Avatar
 
Member Since: Nov 2003
Location: Bugs Bunny should'a made a left turn here
Posts: 23,199
Received 3,246 Likes on 1,668 Posts

Default

i have your shifter boot, console cover & e-brake boot. good stuff.
Old 03-28-2008, 07:07 PM
  #6  
RedlineGoods.com
Supporting Vendor
Thread Starter
 
RedlineGoods.com's Avatar
 
Member Since: Oct 2004
Location: Wilmington DE
Posts: 4,040
Received 142 Likes on 89 Posts
St. Jude Donor '07,-'13

Default

Hi everyone,

find below some photos of our STRIPED BOOTS. These can be ordered for any car and unless you specify otherwise, the stripes will be put wherever there are stitches on your stock boot, ie. a stripe is inserted between two adjacent panels, which are also re-sized to make sure the overall dimension is correct!

Stripes can be combined with stitching which can be CONTRASTING (these two are black perforated leather with light gray stripes and contrasting thread):



Same as above but solid, not perforated, black:


Thread can be also MATCHING so it won't be visible




Thread can be color-matched to the stripes or to the main panels' leather color. Here color matched to stripes, obviously


Or it can be a completely different color than either the main panels OR the stripes - below is black leather with white stripes and red thread:



Here's the new code:VVE56MZ3209 valid until April 3rd!

Take care,
Maciek
Old 04-05-2008, 11:16 AM
  #7  
RedlineGoods.com
Supporting Vendor
Thread Starter
 
RedlineGoods.com's Avatar
 
Member Since: Oct 2004
Location: Wilmington DE
Posts: 4,040
Received 142 Likes on 89 Posts
St. Jude Donor '07,-'13

Default

Guys (and Girls),

here's our new faux-alcantara. We were asked for it many times so we finally obtained it in the quality we've grown to expect from the fabrics we use.

Introducing the DOVE GRAY ALCANTARA

We'll replace these pictures with one of installed boots once we have some pictures. If you like that color and want to get it for your shift boots, you might be interested to know we pay $5 per each picture we decide to use, so please send us some when you can...





Here's the code some of you have been waiting for! Valid through Wednesday, April 9th: 563YBNM2M30

Take care
Maciek
Old 04-18-2008, 12:13 PM
  #8  
RedlineGoods.com
Supporting Vendor
Thread Starter
 
RedlineGoods.com's Avatar
 
Member Since: Oct 2004
Location: Wilmington DE
Posts: 4,040
Received 142 Likes on 89 Posts
St. Jude Donor '07,-'13

Default

Hi,

PIPING is a cool, sporty and elegant way to finish off your shift boots. Piping can be done for any car, and it replaces the threads with a special, well, pipe made by wrapping a thin plastic tube with leather. It looks amazing:









When ordering please make sure to select the primary color as the first leather color and the color of the piping as the secondary leather color.

Here's the code: 563OWK2KS69 - valid through April 23rd!

Have a nice weekend everyone,
Maciek
Old 05-09-2008, 11:05 AM
  #9  
RedlineGoods.com
Supporting Vendor
Thread Starter
 
RedlineGoods.com's Avatar
 
Member Since: Oct 2004
Location: Wilmington DE
Posts: 4,040
Received 142 Likes on 89 Posts
St. Jude Donor '07,-'13

Default

Hello everyone,

another special finishing we offer is QUADRUPLE THREAD. The idea is simple - there are four rows of thread instead of two, and you can choose both the color of the two inside threads, as well as the color of the outside threads. They can all be the same color, but they don't have to - which gives a vast array of visual effects:









Here's the new discount code for you: 56C40N4B2NG - Valid through May 14th!

Have a great weekend,
Maciek
Old 05-09-2008, 11:27 AM
  #10  
DRKMATTER
Melting Slicks
Support Corvetteforum!
 
DRKMATTER's Avatar
 
Member Since: Nov 2004
Location: Parkland Florida
Posts: 2,152
Likes: 0
Received 1 Like on 1 Post
St. Jude Donor '09-'10

Default

Bump for Redline...great quality and customer service! I've had their full interior package for over a year now and I love it! Great prices too!

Old 05-16-2008, 12:05 PM
  #11  
RedlineGoods.com
Supporting Vendor
Thread Starter
 
RedlineGoods.com's Avatar
 
Member Since: Oct 2004
Location: Wilmington DE
Posts: 4,040
Received 142 Likes on 89 Posts
St. Jude Donor '07,-'13

Default

Hello!

Some bad news this time...

For the first time in 5 years we've been on the market we will have to increase our prices. The reason for this is the continuous decrease in the USD/EUR exchange rate and EUR is the currency in which we pay our leather suppliers. Just so you know, 30% of the cost of our boots is material. Their prices have gone up almost twice in the last 2 years.

In order to provide you with the top quality shift boots, we cannot settle for inferior quality leathers to make them with, however their current pricing has made it near impossible to provide our shift boots at the prices they are now. We want to keep our prices low, however, and we've come up with the absolute minimum increase, only directly compensating the increases in costs we incur.

Therefore, all prices will go up by $9 starting this Sunday. So all those of you who have been holding off making a purchase, this is the last call before the increase...

We will try to make the discount codes appear a bit more often than before (to somewhat compensate the increase) however we only want to publish discount codes if we have something to show above the code, ie. some interesting pictures. So, the more pictures we get, the more often a discount code can be released. AND we pay $5 for each picture we decide to use (it has to be high-res and very good quality to be considered). Hint, hint...

Meanwhile, CARBON-FIBER VINYL is the theme of the day today. It's a synthetic material (vinyl-based) with the carbon-fiber structure embossed on it. It definitely looks sporty, definitely automotive and is the base of some very fine looking shift boots:





We have several colors of it available so please be sure to check out our color chart:
http://www.redlinegoods.com/clrchart.shtm

Here's the discount code for today, valid through 5-21: 5V6406LKYO3

Have a great weekend,
Maciek
Old 05-16-2008, 01:09 PM
  #12  
Kevin 64
Instructor
 
Kevin 64's Avatar
 
Member Since: Oct 2006
Location: Monument CO
Posts: 121
Likes: 0
Received 1 Like on 1 Post

Default Be careful-

Colors don't always match. Get a guarantee before buying.
Old 05-16-2008, 02:01 PM
  #13  
FLATOUT
Temporary Hold
 
FLATOUT's Avatar
 
Member Since: Aug 2006
Location: www.modular-concept.com www.flatoutimaging.com
Posts: 7,711
Likes: 0
Received 7 Likes on 6 Posts
Default

Thats my C5 interior up above with the carbon fiber look viynl and the quadruple red stitching.

Mine turned out perfect and it is holding up extremely well!

This has been BY FAR one of my best interior mods to date!

Andy Wheeler
Old 05-30-2008, 09:44 AM
  #14  
RedlineGoods.com
Supporting Vendor
Thread Starter
 
RedlineGoods.com's Avatar
 
Member Since: Oct 2004
Location: Wilmington DE
Posts: 4,040
Received 142 Likes on 89 Posts
St. Jude Donor '07,-'13

Default

Hi all,

another picture of our stripes (black leather, white stripes, orange thread):



And another discount code: 5KAV6X4812Q - valid through Wednesday, June 4th.

Take care,
Maciek
Old 05-30-2008, 11:28 AM
  #15  
RedLS1GTO
Race Director

 
RedLS1GTO's Avatar
 
Member Since: Jul 2003
Location: Color my life with the chaos of trouble.
Posts: 12,742
Received 42 Likes on 9 Posts

Default

They make awesome products at a fraction of the other guys. Here is mine. Leather/carbon armrest w/red stitching. Shift boot and e-brake to match. It pulled my whole interior together and matches both my Lloyds red trimmed mats and my Caravaggio seats perfectly.

Old 05-30-2008, 04:16 PM
  #16  
VetteFTW
Drifting
 
VetteFTW's Avatar
 
Member Since: Sep 2006
Posts: 1,385
Received 29 Likes on 21 Posts

Default

I have a B&M ripper shifter, how much shorter should I make mine? I think the 6/8" would seem a little more realistic but maybe it is that much bigger afterall???
Old 05-30-2008, 07:05 PM
  #17  
MyVetteDream
Race Director
Support Corvetteforum!
 
MyVetteDream's Avatar
 
Member Since: Feb 2004
Location: HOW FAST WAS I GOING OFFICER? Los Angeles Hating GM Dealership Service Dept.'s Since Sept. 2004
Posts: 11,651
Likes: 0
Received 6 Likes on 5 Posts
St. Jude Donor '04-'05-'06-'07

Default

Awesome stuff Maciek!

I still enjoy my stuff from Redline!

Get notified of new replies

To Genuine Italian leather shift boots - custom made for your car!

Old 05-30-2008, 11:59 PM
  #18  
Phidelt076
Instructor
 
Phidelt076's Avatar
 
Member Since: Oct 2005
Location: Lewisville Texas
Posts: 143
Likes: 0
Received 6 Likes on 3 Posts

Default

I have had their shift and e-brake boots in mine for about a year now.

I will say that the pics do not do these justice as you can't tell the leather quality from a picture. These boots made the stock leather (boots and seat skins) feel like cardboard.

My C5 is black with the light oak interior. I ordered the boots in black with the tan stitching. It's subtle but drastically improved my interior in my opinion.
Old 06-03-2008, 08:08 AM
  #19  
RedlineGoods.com
Supporting Vendor
Thread Starter
 
RedlineGoods.com's Avatar
 
Member Since: Oct 2004
Location: Wilmington DE
Posts: 4,040
Received 142 Likes on 89 Posts
St. Jude Donor '07,-'13

Default

Originally Posted by VetteFTW
I have a B&M ripper shifter, how much shorter should I make mine? I think the 6/8" would seem a little more realistic but maybe it is that much bigger afterall???
Hi,

I'd suggest 1.5" shorter.

Thank you
Maciek
Old 06-11-2008, 08:37 AM
  #20  
RedlineGoods.com
Supporting Vendor
Thread Starter
 
RedlineGoods.com's Avatar
 
Member Since: Oct 2004
Location: Wilmington DE
Posts: 4,040
Received 142 Likes on 89 Posts
St. Jude Donor '07,-'13

Default

Hello,

perforated leather is a very nice, sporty addition to any interior:



It combines very well with our finishing types:

1)Stripes (here - BLACK PERFORATED LEATHER WITH SILVER CARBON FIBER STRIPES... I know they look white, but they are silver CF for sure, the camera flash makes them look whitish):


2) Piping (light gray piping on perforated black leather in a C5 Vette - notice how well it matches with the seats - though they are a completely different color, the same pattern of perforations makes them really come together!):



another sample of perforated leather and piping:


Here's the new code: 56ST4G86SI0 - valid through Friday, June 20th!

Have a great day,
Maciek


Quick Reply: Genuine Italian leather shift boots - custom made for your car!



All times are GMT -4. The time now is 09:11 PM.