MSG C5

I have the LED Halo tailights as well and was wondering if this sequential lighting mod would look funky or not.

So, the sequential lighting only occurs when the turn signals are engaged correct? The front turn signals are not impacted are they?
Brake lights, hazards, etc. are also not effected correct?

As to the harness, does each of the four tailights require a harness?

Chicago1

Anyone have a vid of the seq with the halo's with the halo mod?

RPI Designs

David Shiel

these will work with the pulsating 3rd light harness I have installed as a plug and play? Assuming can be dangerous!

LoneStarFRC

Define "funky".

Partially correct.

No, they are not.
Incorrect. Both brake lights and 4-way flashers illuminate the inner light first, then the outer light and both side do this simultaneously.

No. The kits comes with two harnesses and one is used on each side. They perform a slight delay function so the light they're attached to illuminates a few milliseconds after the other light, resulting in a "sequencing" effect.

swpowell

I have these on my car and love them. People know something is different and once they figure it out enjoy the show.

RPI Designs

Chicago1

RPI can I get a answer to this please? Thanks

RPI Designs

I don't know of any videos....sorry.

David Shiel

the process of installing a slower flasher? Mine are a little fast since adding the Halo tails. Sorry about the title typo, but can't edit.

RPI Designs

It's all plug and play. Total install takes 5-10 minutes.

mre1974

Just wondering...will you guys have these available at your tent in Carlisle?

RPI Designs

Yes, sir, we will. We'll be in row IE on the Midway.

killain

I installed these last year, along with the 'Pulsing" third brake light and it was really easy and is a real treat at night. My neighbor has a 2012 Mustang GT and he went and ordered a unit for his mustang. We have this realionship. . . I installed a Corsa 'Pace Car' exhaust, two weeks later he's got a set of Borla's pipes on his Mustang. Took me for a ride on the out back empty airport roads and I have to admit, the Mustang GT is a peppy little coupe. 404 HP.


It may be just me, and I'm not all that sharp, but I never got to like Mopars or mustangs and other unibody cars. I know it's stupid, and I know a Unibody car is stronger, but I still like body on a strong frame.

bighank

If you had 3 lights can see a point in having them operate in a sequential manner. My son's Mustang has 3 vertical sections and the sequential operation looks fine. With our C5s with just 2 tail lights per side I fail to see the benefit of flashing one slightly later than the other.
BTW a MORON LEO pulled my son over and wrote him up with the code for "dazzling lights". Believe it or not this is part of the MD vehicle code but is not defined in any detail. The fact that current 3 lens Mustangs come with factory installed "dazzling lights" ie. lights that operate in a sequential manner meant nothing to the clueless or rather brain dead LEO here in MD.

stingraymyway

Cool look. I've seen it on Vettes and I like it.
Will be ordering a set soon.

RPI Designs

Thanks!

RPI Designs

The 97-04 C5 Corvette sequential harnesses will convert the taillights on your 1997-2004 Corvette into Sequential Turn Signals. The 97-04 C5 Corvette sequentail taillight kit contains two pre-wired harnesses that simply plug into your existing sockets. Return to stock operation at any time by unplugging the harnesses. It doesn't get any easier that this!

These harnesses feature sophisticated electronics that automatically adjust the sequencing speed to match the turn signal flasher in your car. While other products offer you fixed timing or complicated manual adjustments, our modules sense your car's flasher speed and adjust the sequence timing for you. Want more separation between individual lamps? Just put in a slower flasher!

You will not find a nicer C5 Corvette sequentail taillight kit!

Available here: http://rpidesigns.com/shop/item.asp?itemid=1658

stingraymyway

TTT. It won't be long now.

RPI Designs