10 sets of OBX headers 649.99 shipped till 10/10
10-06-2009, 05:42 PM
#1
Former Vendor
Thread Starter
10 sets of OBX headers 649.99 shipped till 10/10
I have 10 sets available on hold for me right now at OBX. These will be held untill 10/10 then shipped out to other vendors on the famous auction site.
all orders will be placed with OBX on 10/11 for shipment.
I am going to PM those who have asked me about them recently.
I am going to PM those who have asked me about them recently.
ONCE THESE 10 ARE GONE IT WILL BE A MONTH OR SO TILL MORE COME IN
If you want headers now is the time.
Application:
1997 to 2004 Chevy Corvette Corvette
1997 to 2004 Chevy Corvette Corvette
Specification.
Primary Port Diameter: 1.70 Inch I.D.
2.50" All The Way From Collector To X-Pipe.
Primary Port Diameter: 1.70 Inch I.D.
2.50" All The Way From Collector To X-Pipe.
100% T304 Stainless Steel..
Flange Thickness:3/8 Inch.
Runner Wall Thickness: 16 Gauge(1.5mm)
Style:
Full Length
Item Description:
OBX Genuine Products Design and Quality of OBX U.S.A.
Runner Wall Thickness: 16 Gauge(1.5mm)
Style:
Full Length
Item Description:
OBX Genuine Products Design and Quality of OBX U.S.A.
High Performance Track Proven Quality Headers From OBX Racing Sports.
Direct Bolt On Set Up Without Any Modification.
Utilize Factory Sensors.
Header Gaskets Included & Cat Replacement Resonators Included.
Dyno Proven, Increase Low End Torque And Horse Power.
Great Throttle Response With Great Sound.
Get Up To 35% Better Exhaust Gas Flow By Replacing The Restrictive And Inefficient Factory Cast Log Manifolds With These Precision Built High Flow Headers.
Increase Better/Smoother Exhaust Flow At Higher RPM To Generate More Power And Maximum Performance Out Of Your Engine.
Beautifully Constructed With High Quality SUS-T304 Stainless Steel For Best Durability.
Mirror Polished Finishing.
CNC Machined 3/8 inch Thick Flange(Best You Can Buy).
This is Great Power Package to Unleashed Hidden Ponies From Your American Muscle.
Best Price In The Industry.
Great Fitment, Great Quality And Great Price Guaranteed.
Actual Pictures, What You See Is What You Get!
Come With OBX Life Time Warranty.
Direct Bolt On Set Up Without Any Modification.
Utilize Factory Sensors.
Header Gaskets Included & Cat Replacement Resonators Included.
Dyno Proven, Increase Low End Torque And Horse Power.
Great Throttle Response With Great Sound.
Get Up To 35% Better Exhaust Gas Flow By Replacing The Restrictive And Inefficient Factory Cast Log Manifolds With These Precision Built High Flow Headers.
Increase Better/Smoother Exhaust Flow At Higher RPM To Generate More Power And Maximum Performance Out Of Your Engine.
Beautifully Constructed With High Quality SUS-T304 Stainless Steel For Best Durability.
Mirror Polished Finishing.
CNC Machined 3/8 inch Thick Flange(Best You Can Buy).
This is Great Power Package to Unleashed Hidden Ponies From Your American Muscle.
Best Price In The Industry.
Great Fitment, Great Quality And Great Price Guaranteed.
Actual Pictures, What You See Is What You Get!
Come With OBX Life Time Warranty.
Last edited by Double D Mods; 10-06-2009 at 09:47 PM.
10-06-2009, 10:44 PM
#4
Former Vendor
Thread Starter
10-07-2009, 09:34 AM
#6
Instructor
Member Since: Aug 2008
Location: Lake Placid Florida
Posts: 204
Received 0 Likes
on
0 Posts
OBX headers and GHL Bulletts
Good morning Dennis, Dennis here. I got in on your last group buy for this package and I have to admit I really like them and the difference they made to my car, along with the great mail-in tune from ECS. It is a totally different car now. I had no facility for installing them here at my house or in my little rural town, so had to go to the "Big City" and the man that installed this system was very impressed with the quality. He has seen lots of different manufactures equiptment and ranks these with the best of them. The only problem he had was with the tips on the Bulletts and getting them aligned. Anybody wondering if this is money well spent shouldn't hesitate, they are. I'd suggest the headers, the Bullets and a tune, you'll wonder why you waited. Great sound, especially at WOT and NO DRONE. You also get to deal with one of the best vendors and just a good man on the Forum. 
10-07-2009, 09:51 AM
#7
Melting Slicks
I assume that since whole system is polished that there isn't a ceramic coating, can that be done and could you pm the cost if possible. They look great and I already have the ghl bullets and love them.
10-07-2009, 09:59 AM
#8
Former Vendor
Thread Starter
I would say call JetHot and ask them. OBX does not offer this. When I called it was like 350.00 to coat them. I decided not to myself.
I could send them direct to JetHot for you to save about 45.00 in shipping expense if JetHot was ok with this.
please let me know more quesitons.
dennis
10-07-2009, 10:01 AM
#9
Former Vendor
Thread Starter
Good morning Dennis, Dennis here. I got in on your last group buy for this package and I have to admit I really like them and the difference they made to my car, along with the great mail-in tune from ECS. It is a totally different car now. I had no facility for installing them here at my house or in my little rural town, so had to go to the "Big City" and the man that installed this system was very impressed with the quality. He has seen lots of different manufactures equiptment and ranks these with the best of them. The only problem he had was with the tips on the Bulletts and getting them aligned. Anybody wondering if this is money well spent shouldn't hesitate, they are. I'd suggest the headers, the Bullets and a tune, you'll wonder why you waited. Great sound, especially at WOT and NO DRONE. You also get to deal with one of the best vendors and just a good man on the Forum.
Thanks for the feedback and kind words Dennis. I appreciate it
It was a pleasure talking to you over the phone as well.
Glad to hear you love the system. Isnt it funny how the foot gets heavier now
10-10-2009, 10:15 PM
#19
Former Vendor
Thread Starter