[Z06] Z06 rear partition
#1
Pro
Thread Starter
Z06 rear partition
hey guys my Z came with a rear partition. How do I get it out. it is in there tight! I pushed from the back then from the front and it wouldn't budge. I know how these simple things go if you rush, I do not want to brake it. How should it come out? thanks,
#2
Race Director
Depending on the manufacturer, it could be a press fit, held in with snaps or VELCRO. Push inwards along the bottom edge. The snaps or VELCRO are typically along the top edge. They usually install from the cabin side.
Be careful, it could be foam board rather than a wood product.
Be careful, it could be foam board rather than a wood product.
Last edited by hotwheels57; 09-21-2010 at 07:13 PM.
#4
Pro
Thread Starter
Thanks, I got it out by pushing it forward. It had a line of velcro underneath. Took a bit to get it out. But it is unscathed. Now to see how loud it is without it.