TPSMak

Who else wants a set? Lots of inventory in stock and ready to ready to ship! Our calipers are 100% rebuilt with brand new seals and boots!

TPSMak

Good stock of calipers and brackets ready to ship... so who wants a set?

TPSMak

LOT's of calipers in stock and ready to ship!

Plus we have some new colors including "Polished Look"!

TPSMak

Lots of stock ready to ship now! If we don't have in stock the wait is about 2-3 weeks from time of order is placed till the calipers are shipped.

TPSMak

We are having a Black Friday sale on Calipers which we currently have in stock and ready to ship. Calipers & Brackets which aren't in stock aren't included in the sale.

C5-Red, Black, Gold, Yellow, Grey-$299
C5-Candy Blue-$329
C6-Gold, Yellow-$299

Click here to place your order.

http://www.tpsmotorsports.com/black-...-corvette.html

TPSMak

Lots of C5 & C6 Calipers & Brackets in stock! If you order what we have in stock there is no waiting!

C6-Red, Candy Blue, Gold

C5-Red, Candy Red, Candy Blue, Yellow, Black, Grey

I also have a few C5 & C6 Cores that have NOT been powder coated but can be made any color you order if we don't have in stock yet.

TPSMak

Lots of colors available in stock and ready to ship immediately! If we don't have the color your looking for we have cores available now so there will be a short wait time.

Order now before the Spring Car Shows start!

TPSMak

Spring is just around the corner! Lots of C5 & C6 Calipers & Brackets in stock! If you order what we have in stock there is no waiting! I also have some un coated units in stock and can make custom colors!

To place your order please go to www.TPSMotorsports.com

TPSMak

Are you looking to get rid of those ugly stock grey calipers? Get a set of our Powder coated calipers! Below are samples of colors we've done... some colors are in stock and ready to ship.. no waiting

dragls

Let me know when you have the next sale so I can jump on this.

TPSMak

Unfortunately, we almost never run sales on these as many times we have a waiting list of 3-4 weeks for back orders. Right now we don't have any waiting list so if your looking at getting a set now would be the best time as we do have some inventory of various colors.

What color are you looking for?

TPSMak

Good amount of calipers in stock and ready to ship....

C5 Red (2 Sets)
C5 Yellow (1 Set)
C5 & C6 Candy Blue (1 Set each)
C6 Candy Red (1 Set)
C6 Gold (1 Set)
C5 & C6 Black (1 Set each)
C5 Silver (1 Set)
C6 (2 sets no done so can make ANY Color You want)

TPSMak

Looking for some Powder coated calipers to make your Vette stand out? Here's what we have available to ship immediately. Other and custom colors available for a short wait. Upgraded rotors and stainless steel brake lines available at a great price also.

C5-Red (2 Sets)
C5-Silver/ Grey (1 Set)
C5-Candy Blue (1 Set)
C6 (Base)-Red (3 Sets)
C6 (Base)-Black (1 Set)
C6 (Z51)-Candy Orange (1 set)

TPSMak

Git rid of those ugly stock calipers and get a set of TPS Motorsports Power Coated & Rebuilt Calipers!
-Lots of colors in stock and ready to ship immediately!

TPSMak

Sunday Bump... need to get your calipers rebuilt? Why not get them powder coated at the same time.

TPSMak

End of 2015 Special for all Powder Coated Caliper Purchase!

Buy any set of powder coated calipers and we will give you a set of Speed Bleeders for them FREE OF CHARGE!



The old manual way of bleeding your brakes
Bleeding brakes used to be a difficult thing to do in the past. It generally required two people to bleed brakes. You had to have one person pump the brake pedal while you had the mechanic open and close the bleeder screw. You had to coordinate the openings and closings with the pumper. If you didn't coordinate the timing correctly you could end up with more air in the system than when you started.

The new and improved way
Introducing SPEED BLEEDER?, the patented bleeder screw with the built-in check valve. It is truly a one-person bleeder screw. Once installed, it becomes a permanent part of the brake system. When it is time to bleed your brakes, you loosen the Speed Bleeder 1/4 turn and pump your brake pedal. When the pedal is depressed the pressure generated opens the check valve letting air and brake fluid out of the end of the Speed Bleeder. When you release the pedal and it returns to the up position, the check valve closes and prevents any air from reentering the system through the Speed Bleeder. When bubble free fluid is evident you close the Speed Bleeder. In the closed position it works just like your stock bleeder screw and prevents any brake fluid from leaking out. It generally takes about 5 pumps to purge each caliper or wheel cylinder. That is all there is to bleeding your brakes. If at a later date you need to bleed your brakes, the patented thread sealing system makes it easy to open the bleeder screw to perform the bleeding operation. It is made of quality materials and it is economical.

TPSMak

Bump for our best sale of the year! Everything is on sale!

Click here to place your orders
http://www.tpsmotorsports.com/black-...-corvette.html


0% Financing Available for up to 1 Year on ALL PURCHASES!

TPSMak

Swap out those ugly stock calipers while your Vette is put away for winter with our Powder Coated & Rebuilt Calipers.. from only $339 shipped to your door.

TPSMak

Spring is just around the corner!


Git rid of those ugly stock calipers and get a set of TPS Motorsports Power Coated & Rebuilt Calipers!
-Lots of colors in stock and ready to ship immediately!

TPSMak

SPRING IS HERE! IT's RACING & SHOW SEASON!



Get rid of the the UGLY stock calipers with a set of our Powder Coated and rebuilt calipers! Pick a color we stock OR any color that's available!