Anti-Venom 6 Speed Shifter Modification (Procedure)
#1
Tech Contributor
Thread Starter
Anti-Venom 6 Speed Shifter Modification (Procedure)
Guys:
This modification will reduce the "notch" feeling when shifting between gears.
And allows for a more easy shift.
Its a MUST do for when you install a Short Shifter.
Easy to install and remove if you don't like it.
On my web site at the bottom:
http://ToqueZ06.com/
Anti-Venom 6 Speed Shifter Modification:
Toque
This modification will reduce the "notch" feeling when shifting between gears.
And allows for a more easy shift.
Its a MUST do for when you install a Short Shifter.
Easy to install and remove if you don't like it.
On my web site at the bottom:
http://ToqueZ06.com/
Anti-Venom 6 Speed Shifter Modification:
Toque
Last edited by Toque; 11-10-2012 at 04:08 AM.
The following 6 users liked this post by Toque:
Glasact (07-31-2018),
Mistrezz 06 (10-31-2017),
Raulito800's (01-13-2020),
Sick03z06 (09-28-2016),
SpeedRacerMach (12-11-2019),
and 1 others liked this post.
#3
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 342,713
Received 19,234 Likes
on
13,933 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Thanks for posting this up. Should help the manual transmission owners.
#4
Race Director
Thanks Toque. This is a mod I haven't done yet even though I've had an aftermarket shifter for over 10 years.
I'll have to check out your website.
Rick
I'll have to check out your website.
Rick
#6
Tech Contributor
Thread Starter
Thanks guys !
Its a real old mod talked about on here years ago.
I thought I would bring it back to life...
I have been reading the C5 section since 2000 (lurker)... signed up once I got my Z in 2004
Toque
Its a real old mod talked about on here years ago.
I thought I would bring it back to life...
I have been reading the C5 section since 2000 (lurker)... signed up once I got my Z in 2004
Toque
#8
Le Mans Master
Toque, my B&M Ripper shifts notchier than s%$@, especially 1st and Reverse. The RSD shifter I installed is almost TOO easy to shift. I am looking for something in between. You think the washer mod would help my old B&M? I plan on changing the trans fluid with Amsoil anyway, so the car will be on the lift.
#9
Did this today on my car which had a Ripper installed by the previous owner. Was too notchy and thanks to Toque I found this procedure to be extremely easy and made all the difference in the world.
Car is more enjoyable to drive now, I can find the right gear without having to really muscle the shifter. Also going 1 to R or R to 1 is easy now.
Car is more enjoyable to drive now, I can find the right gear without having to really muscle the shifter. Also going 1 to R or R to 1 is easy now.
#10
Le Mans Master
Did this today on my car which had a Ripper installed by the previous owner. Was too notchy and thanks to Toque I found this procedure to be extremely easy and made all the difference in the world.
Car is more enjoyable to drive now, I can find the right gear without having to really muscle the shifter. Also going 1 to R or R to 1 is easy now.
Car is more enjoyable to drive now, I can find the right gear without having to really muscle the shifter. Also going 1 to R or R to 1 is easy now.
#11
Guys:
This modification will reduce the "notch" feeling when shifting between gears.
Easy to install and remove if you don't like it.
On my web site at the bottom:
http://ToqueZ06.com/
Anti-Venom 6 Speed Shifter Modification:
Toque
This modification will reduce the "notch" feeling when shifting between gears.
Easy to install and remove if you don't like it.
On my web site at the bottom:
http://ToqueZ06.com/
Anti-Venom 6 Speed Shifter Modification:
Toque
thanks
sean
Last edited by c5sean85; 09-04-2011 at 11:15 PM.
#13
Tech Contributor
Thread Starter
Toque, my B&M Ripper shifts notchier than s%$@, especially 1st and Reverse. The RSD shifter I installed is almost TOO easy to shift. I am looking for something in between. You think the washer mod would help my old B&M? I plan on changing the trans fluid with Amsoil anyway, so the car will be on the lift.
Post back up what you think once you do it !
Toque
The following users liked this post:
ArmchairArchitect (02-09-2022)
#14
Tech Contributor
Thread Starter
Did this today on my car which had a Ripper installed by the previous owner. Was too notchy and thanks to Toque I found this procedure to be extremely easy and made all the difference in the world.
Car is more enjoyable to drive now, I can find the right gear without having to really muscle the shifter. Also going 1 to R or R to 1 is easy now.
Car is more enjoyable to drive now, I can find the right gear without having to really muscle the shifter. Also going 1 to R or R to 1 is easy now.
Your welcome !
No oil comes out at all. The oil level is well below where this detent plug is located.
Yes its quicker to get into gear too. Quicker throws between the gears for sure.
Cheap and easy !
Toque
Last edited by Toque; 09-04-2011 at 11:57 PM.
#15
Safety Car
Member Since: Jun 2009
Location: Frederick, Maryland
Posts: 3,888
Likes: 0
Received 2 Likes
on
2 Posts
I went for a 1.5 hour cruise tonight after doing the anti-venom mod. I had my tranny rebuild done a month ago and I had it removed for the rebuild. Without the shim in there my shifter went back to feeling stiff and notchy. The Anti venom mod really loosened things up. Much easier to get into gear. More precise I find. I have tried 2 shims in the past and it felt too loose. One shim is perfect I find. Everyone is different of course. I would try one first, and two next (if you find one not enough). Its super easy to do.
Post back up what you think once you do it !
Toque
Post back up what you think once you do it !
Toque
I'm already wanting a Z06 trans, if it's more aggressive than the M12 Looks like I have saving to do!
#17
Tech Contributor
Thread Starter
Auto Zone, or similar Auto Parts place. Common part if I remember.
Cost was less than $5 for 2x.
Go to Auto Zone and tell them.... ---> "Oil Tight" Copper Washer #65277 M20 3/4" Copper
They will have it.
Toque
Cost was less than $5 for 2x.
Go to Auto Zone and tell them.... ---> "Oil Tight" Copper Washer #65277 M20 3/4" Copper
They will have it.
Toque
Last edited by Toque; 09-05-2011 at 12:11 AM.
#18
Tech Contributor
Thread Starter
#19
Safety Car
Member Since: Jun 2009
Location: Frederick, Maryland
Posts: 3,888
Likes: 0
Received 2 Likes
on
2 Posts
The new C6 transmissions TR6060 have better hydraulics that makes shifting so easy you can literally do it with one finger! Lol
I'll have to tlk to RkT56(Rick) lol
#20
Tech Contributor
Thread Starter
I was out cruising around again again last night. WOW what an improvement. It feels perfect now !
Toque
Toque