Headlight Halo Projector Kits On Sale **$299.99 SHIPPED**
01-17-2013, 11:30 PM
#1
Former Vendor
Thread Starter
Member Since: Dec 2007
Location: Ft Worth TX
Posts: 22,135
Likes: 0
Received 2 Likes
on
2 Posts
St. Jude Donor '12-'13
Headlight Halo Projector Kits On Sale **$299.99 SHIPPED**
We've been offering our VERY popular HID conversion kits to the forum now for years. Although they provide some of best lighting performance for the money, many still desire improved optics only projector lenses can provide.
After much time in the lab, we have created a kit with the most simple possible install. No harnesses, no re-wiring and no guess work. Our kits ship with the exact parts you need to get the install done right.
We load our kits with pre-installed low beam HID bulbs. We offer the option of adding high beam HID's to the kit as well. If that's not enough, we even give you the option to upgrade the ballasts from the 35w units to 55w units for even more output. Plus, every kit is backed with a LIFETIME WARRANTY from Corvette Mods!
We have a limited quantity of these on hand. You have the option of black or chrome housings (have halos). Sold by the pair.
SALE PRICE $299.99 SHIPPED
Click To Order:
http://www.corvettemods.com/Corvette...os_p_7759.html
After much time in the lab, we have created a kit with the most simple possible install. No harnesses, no re-wiring and no guess work. Our kits ship with the exact parts you need to get the install done right.
We load our kits with pre-installed low beam HID bulbs. We offer the option of adding high beam HID's to the kit as well. If that's not enough, we even give you the option to upgrade the ballasts from the 35w units to 55w units for even more output. Plus, every kit is backed with a LIFETIME WARRANTY from Corvette Mods!
We have a limited quantity of these on hand. You have the option of black or chrome housings (have halos). Sold by the pair.
SALE PRICE $299.99 SHIPPED
Click To Order:
http://www.corvettemods.com/Corvette...os_p_7759.html
Last edited by corvettemods1; 12-10-2013 at 01:28 PM.
01-18-2013, 09:36 PM
#7
Burning Brakes
Would it work if I wired them into my fog lights? I know I would have to turn the headlights on to get the buckets up, but if I turn the headlights off and leave the fogs on, my buckets stay up. I'm assuming I can run it this way with the fogs and halos on.
01-24-2013, 12:13 PM
#10
Burning Brakes
I ordered these and installed them this week. Took me about 3 hrs (no heater in my garage and it was 10 degrees outside), with taking a few breaks to come in and warm up. The instructions had black and white pictures, and were the same as forum member "Patches" (except the wiring is easier with corvettemods1 kit) so I just used my computer to help with taking the headlights apart. I hooked the halo's into my fogs, so I have to turn the headlights on to get the buckets up, but turn the headlights off so the buckets stay up with the fogs on. These lights are great, and look fantastic on my car. Corvettemods1 sent everything needed for the highs, lows, and fogs which I purchased, and answered all questions quickly. Great vendor and product. Highly recommend these.
01-24-2013, 12:22 PM
#11
Race Director
Member Since: Jul 2008
Location: The Sunshine State
Posts: 16,999
Received 2,681 Likes
on
1,482 Posts
2022 C5 of the Year Finalist - Modified
2021 C5 of the Year Finalist - Modified
C7 of the Year - Modified Finalist 2021
Finalist 2020 C7 of the Year -- Modified
2020 C5 of the Year Finalist - Modified
C5 of Year Finalist (appearance mods) 2019
2018 C5 of Year Finalist
Interesting. The housings seem a little different than the earlier versions. Are those clips that allow the clear casing to be removed?
01-24-2013, 12:24 PM
#12
Former Vendor
Thread Starter
Member Since: Dec 2007
Location: Ft Worth TX
Posts: 22,135
Likes: 0
Received 2 Likes
on
2 Posts
St. Jude Donor '12-'13
I ordered these and installed them this week. Took me about 3 hrs (no heater in my garage and it was 10 degrees outside), with taking a few breaks to come in and warm up. The instructions had black and white pictures, and were the same as forum member "Patches" (except the wiring is easier with corvettemods1 kit) so I just used my computer to help with taking the headlights apart. I hooked the halo's into my fogs, so I have to turn the headlights on to get the buckets up, but turn the headlights off so the buckets stay up with the fogs on. These lights are great, and look fantastic on my car. Corvettemods1 sent everything needed for the highs, lows, and fogs which I purchased, and answered all questions quickly. Great vendor and product. Highly recommend these.
01-24-2013, 01:43 PM
#13
Burning Brakes
Give me about a week or so to get you some good pictures. It's just too damn cold up here to be outside taking pictures day or night.
Here is a quick picture from right after I installed them.
