When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
You might be able to get away with a 325/30/19 if you're not lowered too far. Otherwise, a 305/30/19 will fit perfectly
I run 325's without rubbing, or modifiying the brake ducts, but your wheel offset needs to be correct. 65mm backspacing on my iForge IIRC. It's fully lowered on stock bolts, too. Nitto Invos are a little narrower than some brands, though.