Stock Exhaust
04-22-2013, 03:08 PM
#1
Instructor
Thread Starter
Member Since: Nov 2011
Location: Los Angeles CA
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Stock Exhaust
Hello Folks,
I am removing my long tubes and replacing them with my stock manifolds with the cat/h-pipe.
My question is if there is anything that goes after the stock manifolds to the H pipe (i.e. reducer, pipe, etc).
Or does it just bolt up together?
A picture or diagram would be useful please!
Thank you!
I am removing my long tubes and replacing them with my stock manifolds with the cat/h-pipe.
My question is if there is anything that goes after the stock manifolds to the H pipe (i.e. reducer, pipe, etc).
Or does it just bolt up together?
A picture or diagram would be useful please!
Thank you!
04-22-2013, 04:41 PM
#2
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 342,705
Received 19,228 Likes
on
13,933 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Looked under mine - if your H-pipe is intact (including the factory cats), then it should bolt right up to the exhaust manifold and the catbacks bolt to the H-pipe at the rear just before the axles.
04-22-2013, 04:56 PM
#3
Le Mans Master
Just curious. Why do you want to take off the headers?
Also, it was probably tuned for the headers and possibly to eliminate the rear O2 sensors, so when you go back you may need to retune it to stock.
Good luck.
Also, it was probably tuned for the headers and possibly to eliminate the rear O2 sensors, so when you go back you may need to retune it to stock.
Good luck.
