[Z06] New mods on about to go in!
#1
Pro
Thread Starter
New mods on about to go in!
Does anyone have a good guess to where my power levels will be raised to?
Mods:
- Pfadt headers
- Halltech CAI
- Fast 102 with N/W
- B&B Fusions?
- Tune
I am hoping for 500 rwhp, and LOTS of torque thoughts?
Mods:
- Pfadt headers
- Halltech CAI
- Fast 102 with N/W
- B&B Fusions?
- Tune
I am hoping for 500 rwhp, and LOTS of torque thoughts?
#3
Race Director
Seriously??? I'd be surprised if you could hit 425, unless your cam and heads aren't stock, or of course, you have a power adder.
#5
Melting Slicks
I'll be surprised if you break 415. And you mention "LOTS of torque"... if low-end torque is your goal, then you may find that the FAST102 is not the optimal setup for the stock heads and cam.
#7
Le Mans Master
Assuming stock heads and cam, my guess is 390rwhp.
#8
Burning Brakes
No one here is trying to pick fun at you, but 500rwhp with bolt ons isn't going to happen. Unless you have plans for bigger cubes or H/C in the near future the FAST 102 isn't going to be your friend. It's just too much intake for the LS1/6 in near stock form. If you're not going to crack into the engine then sell the FAST 102 and put it into something else. The LS6 intake is perfect for our cars until about 500rwhp.
#10
Melting Slicks
#11
Melting Slicks
#12
#14
Pro
Thread Starter
uh, yeah...wrong section....Yes it is a C6Z06...
:will y: