Active Handling Message
#1
Racer
Thread Starter
Active Handling Message
I just recently had the car seviced, coolant flushed and changed and brass gears put in the headlight assembly. Now the ABS and Active Handling light stays on and goes off after I stop and restart. Seems to just do it on cold start and not after I drive it.
I took it back to the dealership and they reset the gages. But that didn't take care of the problem. Anyone know what it is? I'm thinking the sensor might be going bad. They gave me a price for parts only for the pump and module that serves this and it's over the top at $3400.
I took it back to the dealership and they reset the gages. But that didn't take care of the problem. Anyone know what it is? I'm thinking the sensor might be going bad. They gave me a price for parts only for the pump and module that serves this and it's over the top at $3400.
#3
Racer
Thread Starter
They connected the hand held computer to it and reset the gages, not sure if that's what you mean.
#4
#5
Racer
Thread Starter
Done the auto test: No Codes
Why would the light stay on at times and no codes?
ABS and Active handling light is not on at this time. Guess I will have to go from here and see what happens. Thanks guys.
Why would the light stay on at times and no codes?
ABS and Active handling light is not on at this time. Guess I will have to go from here and see what happens. Thanks guys.
Last edited by NMYDNA; 05-13-2013 at 10:59 AM.
#6
Melting Slicks
If your tire pressure when tires are cold, falls below a certain level, this may cause codes. Had this happen several times in the winter on my 2000 coupe. Once the tires were warm, went away.
Also moisture will cause an issue with the connection. Of course your abs module may be going bad. Need codes pulled for more info.
Also moisture will cause an issue with the connection. Of course your abs module may be going bad. Need codes pulled for more info.
#7
Racer
Thread Starter
If your tire pressure when tires are cold, falls below a certain level, this may cause codes. Had this happen several times in the winter on my 2000 coupe. Once the tires were warm, went away.
Also moisture will cause an issue with the connection. Of course your abs module may be going bad. Need codes pulled for more info.
Also moisture will cause an issue with the connection. Of course your abs module may be going bad. Need codes pulled for more info.
#8
Racer
Thread Starter
Not recently, change to Michelin Sport a few years ago. This issue came up after having the car serviced and other work done.
I'll check the codes next time it comes up and reset it then. Thanks!
I'll check the codes next time it comes up and reset it then. Thanks!
#9
Team Owner
Member Since: Mar 2004
Location: Oklahoma City OK
Posts: 58,259
Received 1,675 Likes
on
1,298 Posts
C6 of Year Finalist (appearance mods) 2019
When I got a "Service Active Handling" message it was the streering sensor. About $350.00 took care of it at a Chevy Dealer.