Let there be light!
11-10-2013, 08:46 PM
#42
Melting Slicks
I just installed them in the stock housing and they sure look bright. Would they be better in the adjure housing? probably but you can easily swap the lamps to the adjure later if you want.
Forget the reaching up over the exhaust or removing tail lights. The easiest way to get to and install the reverse lamps is to remove the license plate bracket. Remove your license plate, remove 4 T15 torks screws and the whole assembly comes off. Push the lacking tab and twist the sockets. You can now clean and wax/polish behind the plate bracket, install the two new bulbs (hit your lock button on your fob to test) and reinstall everything. Admire your work.
Forget the reaching up over the exhaust or removing tail lights. The easiest way to get to and install the reverse lamps is to remove the license plate bracket. Remove your license plate, remove 4 T15 torks screws and the whole assembly comes off. Push the lacking tab and twist the sockets. You can now clean and wax/polish behind the plate bracket, install the two new bulbs (hit your lock button on your fob to test) and reinstall everything. Admire your work.
I just ordered some, thanks to the OP for sharing!!!
11-10-2013, 09:20 PM
#43
Racer
I just installed them in the stock housing and they sure look bright. Would they be better in the adjure housing? probably but you can easily swap the lamps to the adjure later if you want.
Forget the reaching up over the exhaust or removing tail lights. The easiest way to get to and install the reverse lamps is to remove the license plate bracket. Remove your license plate, remove 4 T15 torks screws and the whole assembly comes off. Push the lacking tab and twist the sockets. You can now clean and wax/polish behind the plate bracket, install the two new bulbs (hit your lock button on your fob to test) and reinstall everything. Admire your work.
Forget the reaching up over the exhaust or removing tail lights. The easiest way to get to and install the reverse lamps is to remove the license plate bracket. Remove your license plate, remove 4 T15 torks screws and the whole assembly comes off. Push the lacking tab and twist the sockets. You can now clean and wax/polish behind the plate bracket, install the two new bulbs (hit your lock button on your fob to test) and reinstall everything. Admire your work.
11-10-2013, 10:42 PM
#45
11-11-2013, 10:33 AM
#46
Racer
I still have the factory black trim around my tag that has to be removed. My Adjure frame will arrive tomorrow. I already have the LED bulbs.
11-11-2013, 02:59 PM
#50
Team Owner
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 28,846
Received 1,762 Likes
on
1,529 Posts
11-11-2013, 05:06 PM
#55
Melting Slicks
Thread Starter
