C5 ZR1 Carbon Fiber Spoiler - Test Fit Pictures!
#23
Pro
Thread Starter
#26
Pro
Thread Starter
I used the VHB 5952. I bought a roll off ebay you may want to get atleast 10 ft so you have enough. Be careful when you mount it, because this tape is so sticky once its on it immediately bonds. You only get one chance to mount it right and having a second or 3rd person will help as well. I do recommend that once its on allow the tape to cure atleast 24 hours before driving the car as well. Goodluck with the install!
#27
I used the VHB 5952. I bought a roll off ebay you may want to get atleast 10 ft so you have enough. Be careful when you mount it, because this tape is so sticky once its on it immediately bonds. You only get one chance to mount it right and having a second or 3rd person will help as well. I do recommend that once its on allow the tape to cure atleast 24 hours before driving the car as well. Goodluck with the install!
#29
Pro
Thread Starter
I used 1 inch tape. Which is the widest I'd go. Put the tape on the spoiler first and let that cure for a day before you install on your car. I also cleaned the rear of the car off with Dawn soap to strip the wax off to allow a better bond. You should do the same if your car has been waxed recently. I pretty much just applied the tape to the bottom of the spoiler and outlined the edges all around.
#31
Race Director
Can you pm a link to me?
I have Sebring Silver Coupe. That looks great on your silver!
#33
Pro
Thread Starter
Sorry for the late reply, before I ordered mine I called to check if it was in stock, which it was and I received it in about 2 weeks. I ordered on a Tuesday and the guy told me that they ship 2 times a week on certain days and mine was shipped out the following week. I don't remember exactly which days they ship on though. You do have to allow more time if the product is out of stock and they have to make more which is probably why you have to wait 4 or more weeks.