Notices
C5 General General C5 Corvette and C5 Z06 Discussion not covered in Tech
Sponsored by:
Sponsored by:

Stainless Steel Headers Made In USA for Under $850 Shipped @ Hinson Motorsports

Thread Tools
 
Search this Thread
 
Old 08-14-2015, 03:08 PM
  #21  
red03vette
Burning Brakes
 
red03vette's Avatar
 
Member Since: Aug 2011
Location: Vancouver Island
Posts: 1,157
Received 112 Likes on 98 Posts

Default

Originally Posted by HinsonSuperCars
No catted version offered and we wont offer one for a while due to our production facility struggling to keep up at this point. The dyno numbers are within a few of every other said brand in 1 7/8" out there. There are only so many ways to reinvent the wheel (if you will). The cam featured, you will see gains of about 50rwhp and about 35rwtq and the drivability is excellent. This was the first cammed car the owner had ever owned and he had no complaints about the drivability and loved where the hp and tq presented itself. The car is very quick out of the hole and the power comes on fast. All together with cam and headers this car made 416rwhp and 377rwtq conservatively tuned in 100F and 90% humidity.



Well we have a set in stock with your name on them. Thanks for the vote of confidence.



See above answer.
thanks for the reply! those are nice gains over a stock engine for sure, was that an LS1 or LS6? mine is an 2003 LS1 so I'm assuming similar results?
Old 08-17-2015, 11:23 AM
  #22  
0HinsonSuperCars
Former Vendor
Thread Starter
 
HinsonSuperCars's Avatar
 
Member Since: Feb 2007
Location: Birmingham, AL www.hinsonsupercars.com 205-909-9402
Posts: 17,337
Received 38 Likes on 37 Posts
Default

Originally Posted by red03vette
thanks for the reply! those are nice gains over a stock engine for sure, was that an LS1 or LS6? mine is an 2003 LS1 so I'm assuming similar results?
That was on a Z06 (LS6) car, but the gains on the LS1 would be very similar. The gains were impressive, especially for how street friendly the car drove. Needless to say the customer was very happy with the results.
Old 08-18-2015, 10:11 AM
  #23  
0HinsonSuperCars
Former Vendor
Thread Starter
 
HinsonSuperCars's Avatar
 
Member Since: Feb 2007
Location: Birmingham, AL www.hinsonsupercars.com 205-909-9402
Posts: 17,337
Received 38 Likes on 37 Posts
Default

Ttt.
Old 08-19-2015, 10:30 AM
  #24  
0HinsonSuperCars
Former Vendor
Thread Starter
 
HinsonSuperCars's Avatar
 
Member Since: Feb 2007
Location: Birmingham, AL www.hinsonsupercars.com 205-909-9402
Posts: 17,337
Received 38 Likes on 37 Posts
Default

Bump.
Old 08-19-2015, 07:29 PM
  #25  
red03vette
Burning Brakes
 
red03vette's Avatar
 
Member Since: Aug 2011
Location: Vancouver Island
Posts: 1,157
Received 112 Likes on 98 Posts

Default

Originally Posted by HinsonSuperCars
That was on a Z06 (LS6) car, but the gains on the LS1 would be very similar. The gains were impressive, especially for how street friendly the car drove. Needless to say the customer was very happy with the results.
Very nice!
Old 08-20-2015, 10:39 AM
  #26  
0HinsonSuperCars
Former Vendor
Thread Starter
 
HinsonSuperCars's Avatar
 
Member Since: Feb 2007
Location: Birmingham, AL www.hinsonsupercars.com 205-909-9402
Posts: 17,337
Received 38 Likes on 37 Posts
Default

Originally Posted by red03vette
Very nice!
Appreciate that.
Old 08-21-2015, 12:15 PM
  #27  
0HinsonSuperCars
Former Vendor
Thread Starter
 
HinsonSuperCars's Avatar
 
Member Since: Feb 2007
Location: Birmingham, AL www.hinsonsupercars.com 205-909-9402
Posts: 17,337
Received 38 Likes on 37 Posts
Default

Bump for Friday.
Old 08-24-2015, 11:43 AM
  #28  
0HinsonSuperCars
Former Vendor
Thread Starter
 
HinsonSuperCars's Avatar
 
Member Since: Feb 2007
Location: Birmingham, AL www.hinsonsupercars.com 205-909-9402
Posts: 17,337
Received 38 Likes on 37 Posts
Default

Ttt.
Old 08-25-2015, 10:05 AM
  #29  
0HinsonSuperCars
Former Vendor
Thread Starter
 
HinsonSuperCars's Avatar
 
Member Since: Feb 2007
Location: Birmingham, AL www.hinsonsupercars.com 205-909-9402
Posts: 17,337
Received 38 Likes on 37 Posts
Default

Bump.
Old 08-27-2015, 10:11 AM
  #30  
0HinsonSuperCars
Former Vendor
Thread Starter
 
HinsonSuperCars's Avatar
 
Member Since: Feb 2007
Location: Birmingham, AL www.hinsonsupercars.com 205-909-9402
Posts: 17,337
Received 38 Likes on 37 Posts
Default

Order your headers today to get in on the next production run.
Old 08-27-2015, 11:10 AM
  #31  
cooter99
Advanced
 
cooter99's Avatar
 
Member Since: May 2015
Posts: 65
Likes: 0
Received 2 Likes on 2 Posts
Default

What needs to be done to run this setup without cats? With a factory exhaust how much will just these headers and x pipe change the volume of the exhaust? Stock 99 coupe Thanks, Cooter.
Old 08-28-2015, 11:25 AM
  #32  
0HinsonSuperCars
Former Vendor
Thread Starter
 
HinsonSuperCars's Avatar
 
Member Since: Feb 2007
Location: Birmingham, AL www.hinsonsupercars.com 205-909-9402
Posts: 17,337
Received 38 Likes on 37 Posts
Default

Originally Posted by cooter99
What needs to be done to run this setup without cats? With a factory exhaust how much will just these headers and x pipe change the volume of the exhaust? Stock 99 coupe Thanks, Cooter.
Nothing has to be modified to install these headers on your car and the only way we offer them is without cats. the video below is a Z06 with stock exhaust and our headers installed. It also has our High roller camshaft package.

Old 08-28-2015, 12:11 PM
  #33  
IH8FORD
Racer
 
IH8FORD's Avatar
 
Member Since: May 2014
Location: Orchard Park NY
Posts: 356
Received 29 Likes on 21 Posts
Default

I cant believe there are still no install reviews for these things. Ive seen a couple for c6 but want to hear first hand from some c5 guys.
Old 08-31-2015, 10:04 AM
  #34  
0HinsonSuperCars
Former Vendor
Thread Starter
 
HinsonSuperCars's Avatar
 
Member Since: Feb 2007
Location: Birmingham, AL www.hinsonsupercars.com 205-909-9402
Posts: 17,337
Received 38 Likes on 37 Posts
Default

Originally Posted by IH8FORD
I cant believe there are still no install reviews for these things. Ive seen a couple for c6 but want to hear first hand from some c5 guys.
What questions do you have?
Old 09-01-2015, 11:29 AM
  #35  
0HinsonSuperCars
Former Vendor
Thread Starter
 
HinsonSuperCars's Avatar
 
Member Since: Feb 2007
Location: Birmingham, AL www.hinsonsupercars.com 205-909-9402
Posts: 17,337
Received 38 Likes on 37 Posts
Default

Bump.
Old 09-02-2015, 10:18 AM
  #36  
0HinsonSuperCars
Former Vendor
Thread Starter
 
HinsonSuperCars's Avatar
 
Member Since: Feb 2007
Location: Birmingham, AL www.hinsonsupercars.com 205-909-9402
Posts: 17,337
Received 38 Likes on 37 Posts
Default

Bump.
Old 09-03-2015, 10:34 AM
  #37  
0HinsonSuperCars
Former Vendor
Thread Starter
 
HinsonSuperCars's Avatar
 
Member Since: Feb 2007
Location: Birmingham, AL www.hinsonsupercars.com 205-909-9402
Posts: 17,337
Received 38 Likes on 37 Posts
Default

Ttt.

Get notified of new replies

To Stainless Steel Headers Made In USA for Under $850 Shipped @ Hinson Motorsports

Old 09-04-2015, 10:38 AM
  #38  
0HinsonSuperCars
Former Vendor
Thread Starter
 
HinsonSuperCars's Avatar
 
Member Since: Feb 2007
Location: Birmingham, AL www.hinsonsupercars.com 205-909-9402
Posts: 17,337
Received 38 Likes on 37 Posts
Default

All orders over $100 ship for free this weekend.
Old 09-08-2015, 01:31 PM
  #39  
0HinsonSuperCars
Former Vendor
Thread Starter
 
HinsonSuperCars's Avatar
 
Member Since: Feb 2007
Location: Birmingham, AL www.hinsonsupercars.com 205-909-9402
Posts: 17,337
Received 38 Likes on 37 Posts
Default

Bump.
Old 09-14-2015, 11:52 AM
  #40  
0HinsonSuperCars
Former Vendor
Thread Starter
 
HinsonSuperCars's Avatar
 
Member Since: Feb 2007
Location: Birmingham, AL www.hinsonsupercars.com 205-909-9402
Posts: 17,337
Received 38 Likes on 37 Posts
Default

To the top.


Quick Reply: Stainless Steel Headers Made In USA for Under $850 Shipped @ Hinson Motorsports



All times are GMT -4. The time now is 11:42 PM.