Finally Arrived!!! Satisfying my Carbon Fetish
#21
Burning Brakes
Thread Starter
It's an anti-submarine pad. It takes the place of the 5th point for a 5 point harness. It's not regulation if I were to seriously track it though. It's actually pretty comfortable, it holds you against the back of the seat so that you don't have to use your legs to do it. There is a version with that removed with a cut out for the belt.
#22
Burning Brakes
Thread Starter
It wasn't cheap and it took 7 months to get but it was worth it. The seats retain all of the functionality of the OEM including lumbar and memory. The match-up between the real and the hydro is not that drastic, plus none of it is visually against each other. The way that I designed it was that all the hydro parts are small and flow around the outside (door handles, gauge bezel, center console). The real carbon pieces are large and in the center (seats, steering wheel). Then I made sure that everything was separated by leather.
The following users liked this post:
ZeeOh6vette (06-09-2016)
#23
Burning Brakes
Thread Starter
I try not to reflect on that, it hurts...
He has a black/red set for sale here no waiting: https://www.corvetteforum.com/forums...o-waiting.html
He has a black/red set for sale here no waiting: https://www.corvetteforum.com/forums...o-waiting.html
Last edited by workmanw; 06-08-2016 at 05:56 PM.
#24
Burning Brakes
Thread Starter
Steering wheel, seats, shift **** were done by Apsis. Gauge cluster surround is from American Hydrocarbon. Dash, console, armrest, door panels are from Double D Mods.
#26
1/4 mile/AutoX
Is case you couldn't tell by my smart as* post /// I love it !!!!
#27
Le Mans Master
Can't wait to see the end result...looks sexy
#29
Racer
It wasn't cheap and it took 7 months to get but it was worth it. The seats retain all of the functionality of the OEM including lumbar and memory. The match-up between the real and the hydro is not that drastic, plus none of it is visually against each other. The way that I designed it was that all the hydro parts are small and flow around the outside (door handles, gauge bezel, center console). The real carbon pieces are large and in the center (seats, steering wheel). Then I made sure that everything was separated by leather.
#30
Burning Brakes
Thread Starter
The car is still in pieces so no glamor shots yet. I'm trying to get it on the road by the end of the month in time for the next Cars and Coffee here in Charlotte. It falls on my birthday and I'm tired of going and not having a car! Here's a few more and a teaser at the end...
And now the tease...
That's it for now....
And now the tease...
That's it for now....
The following users liked this post:
workmanw (06-09-2016)
The following users liked this post:
workmanw (06-09-2016)
The following users liked this post:
workmanw (06-09-2016)
#34
Le Mans Master
I try not to reflect on that, it hurts...
He has a black/red set for sale here no waiting: https://www.corvetteforum.com/forums...o-waiting.html
He has a black/red set for sale here no waiting: https://www.corvetteforum.com/forums...o-waiting.html
That's just ST#P!% !
The following users liked this post:
workmanw (06-09-2016)
#36
Burning Brakes
Thread Starter
More Goodies Arrived Today!!!
I finally have everything to complete the car and get it on the road. The goal was to have it done by the end of the week, but that's looking doubtful I'm sure it will be ready sometime in July. Anyway, on with the eye candy...
In case you're wondering what those "T" shaped things are:
The front end is on:
Yes, I know that it looks like the bumper is not matching the hood, pewter is a difficult color to match. I have an after market hood that's being put on. It's at the body shop and it has been prepped. They are going to paint it on the car and blend it into the front and the fenders. The light are being replaced by the RadioFlyer pieces.
Almost ready to fly
In case you're wondering what those "T" shaped things are:
The front end is on:
Yes, I know that it looks like the bumper is not matching the hood, pewter is a difficult color to match. I have an after market hood that's being put on. It's at the body shop and it has been prepped. They are going to paint it on the car and blend it into the front and the fenders. The light are being replaced by the RadioFlyer pieces.
Almost ready to fly
#37
Melting Slicks
Please elaborate on the silver interior door pulls and locks. I have been contemplating painting mine silver to get them to look like brushed aluminum. What did you use -- paint, powder coat, something else? Thanks.
The following users liked this post:
workmanw (06-26-2016)
#39
Burning Brakes
Thread Starter
That's not paint. They are cast aluminum. A guy in Ca. made them for his own car. He sold the car on eBay and I came across it. Long story short he sold them to me. He has the molds and may make more of them, but right now I have the only set. He's going to let me know when he's ready to make some more and sell them. When he does I'll definitely be letting the forum know.
#40
Pro
Workmanw: You probably blow your nose with $100 dollar bills. That's some serious coin being dropped on the mods. Nicely done.
I finally have everything to complete the car and get it on the road. The goal was to have it done by the end of the week, but that's looking doubtful I'm sure it will be ready sometime in July. Anyway, on with the eye candy...
In case you're wondering what those "T" shaped things are:
The front end is on:
Yes, I know that it looks like the bumper is not matching the hood, pewter is a difficult color to match. I have an after market hood that's being put on. It's at the body shop and it has been prepped. They are going to paint it on the car and blend it into the front and the fenders. The light are being replaced by the RadioFlyer pieces.
Almost ready to fly
In case you're wondering what those "T" shaped things are:
The front end is on:
Yes, I know that it looks like the bumper is not matching the hood, pewter is a difficult color to match. I have an after market hood that's being put on. It's at the body shop and it has been prepped. They are going to paint it on the car and blend it into the front and the fenders. The light are being replaced by the RadioFlyer pieces.
Almost ready to fly