Gauging Interest - Urethane Rear Bumper with duckbill wing
The following users liked this post:
Patches (02-18-2017)
#22
Melting Slicks
Member Since: Sep 2012
Location: Fort Myers Beach Florida
Posts: 2,013
Received 629 Likes
on
394 Posts
Looks interesting. if my car was wrecked in the back I would consider buying one. Then my car would look different and special. But then everyone would know my car was wrecked. Never mind, I wouldn't replace the oem part.
#23
Former Vendor
Thread Starter
Thanks guys! I'll be honest, I didn't think there would be enough interest for this to get it done. I'm going to get some numbers done on this and see what we can do.
The following users liked this post:
Patches (02-20-2017)
The following users liked this post:
Patches (02-20-2017)
#25
Melting Slicks
With improved fitment I would DEFINITELY be interested too. I also am in the same boat with the ACI spoiler and this would be nicer to have with it molded in AND a larger duck bill.
The following users liked this post:
Patches (02-20-2017)
#26
Drifting
exactly the ACI spoiler follows the lines of the car best but still has that tacked on look this would solve all of that. Plus my bumper got dinged up in an accident so I will wait for this
The following users liked this post:
Patches (02-21-2017)
#27
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 342,704
Received 19,226 Likes
on
13,933 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
That rear bumper does look great. If you can get it to where the fit is OEM and all the lights/license plate items just bolt on, I might be interested.
The following users liked this post:
Patches (02-20-2017)
#29
Intermediate
Christian
2003 C5Z
Last edited by tian647; 02-20-2017 at 09:35 PM.
The following users liked this post:
Patches (02-20-2017)
#30
NCM Lifetime Member
Member Since: Aug 2015
Location: Cunningham, TN
Posts: 4,968
Received 3,925 Likes
on
2,014 Posts
2021 Corvette of the Year - Modified
2020 C5 of the Year Winner- Modified
C5 of Year Finalist (appearance mods) 2019
St. Jude Donor '18-'19-'20-'21-'22-'23-'24
The following users liked this post:
Patches (02-21-2017)
#31
Le Mans Master
Member Since: Jun 2007
Location: Eastern Corn-Nation
Posts: 6,779
Received 3,866 Likes
on
1,672 Posts
2015 C5 of the Year Winner
I've kind of been on the lookout for the SW's one for a long time but if this was available I would have to consider one. Depends on fitment of course. Love the look.
The following users liked this post:
Patches (02-21-2017)
#32
Melting Slicks
Member Since: Mar 2009
Location: Odessa FL
Posts: 2,300
Received 113 Likes
on
99 Posts
St. Jude Donor '10-'12-'13-'14-'15-'16-'17
Comparisons
So just to compare looks, in order of appearance, Xtreme rear, SW rear, and Tiger Shark rear. Again, if the fit and finish on the Xtreme can be assured as first rate, I would be in.
Xtreme by CC
Spectre Works
Tiger Shark
I am also looking to do exhaust tips with the rear bumper as four 4inch round.belled tips a la the C7 look. if I can't get someone to mod my Ti tips to replicate the C7 look and spacing will probably go to the NXT Step exhaust and mod those tips. The Corsa Tiger Shark tips come close but I think they are 3.5 inch tips.
Xtreme by CC
Spectre Works
Tiger Shark
I am also looking to do exhaust tips with the rear bumper as four 4inch round.belled tips a la the C7 look. if I can't get someone to mod my Ti tips to replicate the C7 look and spacing will probably go to the NXT Step exhaust and mod those tips. The Corsa Tiger Shark tips come close but I think they are 3.5 inch tips.
The following users liked this post:
Patches (02-21-2017)
#33
Former Vendor
Thread Starter
I am also looking to do exhaust tips with the rear bumper as four 4inch round.belled tips a la the C7 look. if I can't get someone to mod my Ti tips to replicate the C7 look and spacing will probably go to the NXT Step exhaust and mod those tips. The Corsa Tiger Shark tips come close but I think they are 3.5 inch tips.
#38
Melting Slicks
Member Since: Nov 2014
Location: Havre de Grace Maryland
Posts: 3,134
Received 1,211 Likes
on
772 Posts
Not a mod guy to my C5 body but the wing looks great. It certainly looks like it was production. Count me in as long as the fit is perfect. Make sure when you get ready to sell that the Forum is given the first notice.
The following users liked this post:
Patches (02-23-2017)
The following users liked this post:
Patches (02-23-2017)