Procharger P1SC kit, low miles, A&A bracket
#1
Pro
Thread Starter
Member Since: Feb 2008
Location: Thornton PA
Posts: 615
Received 123 Likes
on
62 Posts
St. Jude Donor '23
Procharger P1SC kit, low miles, A&A bracket
Up for sale is a Procharger P1SC HO kit. The kit itself has less than 1000 miles and is very clean. This was removed from a show car that was wrecked and parted out. There is no oil, dirt, on grime on any of the piping, intercoolers, or head unit. The kit will need a few minor items, but the majority of the components are there. You will need procharger oil, a belt, injectors, tuning, and possibly a few nuts and bolts. The kit includes the following:
Polished P1SC Head unit, includes ATI 4.25" 6 rib pulley
ATI Procharger bracket
Twin IC setup (3.5") with brackets
Piping from blower to IC with clamps and silicon couplers
ATI Bypass valve w/ filter
ATI Instruction manual
Extra Idler pulley for 6 rib
14 hose clamps, Red and black large silicon couplers
Radiator shroud (one of the blades broke on the fan, but still working just with slight vibration)
I am pricing the kit to move at $2850. (plus s/h and paypal) I'm also offering the option to include an A&A bracket for an additional $200.00. The A&A bracket includes the bolts and spacers needed for the 6 or 8 rib setups. If you wish to upgrade to the stage II components, a member on here has the radiator cradle, shroud, intake pipe, and filter for cheap.
Please let me know if you have any questions at all - I of course always welcome all offers!
The pictures speak for themselves.
Entire Kit
Intercoolers with brackets
Piping w/ bypass valve and filter
Radiator Shroud
Head Unit
ATI Bracket
A&A bracket with 6 and 8 rib pulleys are hardware
Enjoy and thanks for viewing
Polished P1SC Head unit, includes ATI 4.25" 6 rib pulley
ATI Procharger bracket
Twin IC setup (3.5") with brackets
Piping from blower to IC with clamps and silicon couplers
ATI Bypass valve w/ filter
ATI Instruction manual
Extra Idler pulley for 6 rib
14 hose clamps, Red and black large silicon couplers
Radiator shroud (one of the blades broke on the fan, but still working just with slight vibration)
I am pricing the kit to move at $2850. (plus s/h and paypal) I'm also offering the option to include an A&A bracket for an additional $200.00. The A&A bracket includes the bolts and spacers needed for the 6 or 8 rib setups. If you wish to upgrade to the stage II components, a member on here has the radiator cradle, shroud, intake pipe, and filter for cheap.
Please let me know if you have any questions at all - I of course always welcome all offers!
The pictures speak for themselves.
Entire Kit
Intercoolers with brackets
Piping w/ bypass valve and filter
Radiator Shroud
Head Unit
ATI Bracket
A&A bracket with 6 and 8 rib pulleys are hardware
Enjoy and thanks for viewing
Last edited by NotScared; 09-09-2009 at 07:51 AM.
#6
Race Director
Bump for a sweet kit!
#10
Pro
Thread Starter
Member Since: Feb 2008
Location: Thornton PA
Posts: 615
Received 123 Likes
on
62 Posts
St. Jude Donor '23
Thanks for all of the interest this far fellas!
#13
Le Mans Master
ahh damn! this is a steal of a deal...
hmm...i just sold my drag pack, lets see if i can scrap up the extra 1000...
will be in contact if things work out for me!
how much boost is the pulley set for? what power did it make?
bigger injectors and crank pining kit incld?
hmm...i just sold my drag pack, lets see if i can scrap up the extra 1000...
will be in contact if things work out for me!
how much boost is the pulley set for? what power did it make?
bigger injectors and crank pining kit incld?
Last edited by 1 BAD BURB; 09-10-2009 at 10:55 AM.
#14
Pro
Thread Starter
Member Since: Feb 2008
Location: Thornton PA
Posts: 615
Received 123 Likes
on
62 Posts
St. Jude Donor '23
Sale pending as of now.
1 bad burb - The pulley is the stock 4.25" procharger pulley which should produce around 7-8psi assuming a stock crank pulley. You would need to purchase injectors and the crank pinning kit. The pins are relatively cheap and you can likely find someone on here to lend you the tool to get it done.
Will keep you all posted if the sale falls through.
1 bad burb - The pulley is the stock 4.25" procharger pulley which should produce around 7-8psi assuming a stock crank pulley. You would need to purchase injectors and the crank pinning kit. The pins are relatively cheap and you can likely find someone on here to lend you the tool to get it done.
Will keep you all posted if the sale falls through.
Last edited by NotScared; 09-10-2009 at 11:27 AM.
#15
Pro
Member Since: May 2005
Location: Northfield Center Ohio
Posts: 710
Likes: 0
Received 0 Likes
on
0 Posts
If the A&A bracket does not sell with it I would definitely be interested. If the buyer doesnt want the other bracket I might be interested in that one too.
#16
Advanced
Member Since: Apr 2003
Location: Berlin Berlin
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts