dbirdz06

I hit a deer carcass this weekend and bent my radiator mount, radiator, air dam, and a/c radiator back about 3 inches. Also broke the plastic radiator cover off it's mounts.

If you have any of these available or sitting around the garage, please let me know.

Here's some pics of what happened. Sorry it's gross.

dbirdz06

morning bump!

sperkins

I have a radiator support. It's was bent and straightened, but it looks way better than what you have. Let me look closer tonight and I'll snap some pics if possible.

Gene Culley

I would be happy to help you out with new.

||--Genuine GM Radiator Cage/Skid Plate--||

10400765 – Radiator cage – 270.48

To bolt everything to the cage you need to purchase the nut inserts below.
These are threaded inserts that will allow you to bolt items to the cage.
If you want to purchase new bolts you can purchase them as well.

11609836 – Nut insert – 2.83 (Qty 1)
11518908 – Nut insert – 4.41 each (Qty 7)
11570082 – Bolt – .72 (Qty 1)
11514623 – Bolt - .96 (Qty 7)

Note: Some of the hardware may show up on the website as fitting something else or another application.
That is correct, they fit many other vehicles and applications.

||--Genuine GM 3 Piece Frt Spoiler/Air Dam--||

10401458 – Center – 78.46
10419312 – LH – 16.55
10419313 – RH – 20.94

mrjim001

I should have rad, cond, rad plastic panel, lower rad support/cage, upper rad cover.. let me check in the morning and get back to you... jim in Arizona.

dbirdz06

Please do. Thanks!