Parting out Yellow C5 LOTS OF UPGRADES (merged)
#1
Former Vendor
Thread Starter
Member Since: Jan 2010
Location: Riverside Ca
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
Parting out Yellow C5 LOTS OF UPGRADES (merged)
It is automatic. The top is removable. It has LOTS & LOTS of UPGRADES!!! My Paypal info is socalgtm@gmail.com if you paypal me for a part. Please inside the comment area on paypal put the exact part your buying, phone number and correct shipping address.Also please message me with a confirmation so i can mark the item sold.
Here Are Some Of The Upgrades:
- Viper Alarm- KV Motion Sensor=50.00 no remote
- Custom Auto Shift ****= sold
- Custom Auto Shift Boot=sold
- Custom Seats= sold
- Custom Console Cushion Arm Rest w/ Upper + Lower Cover + Fuel Release - SOLD
- Custom Loyd Mats=sold
- Custom Altec Sill Plates=sold
- Glass Top with Glass Top Shades= sold
- Front and Rear Bumper Polished Stainless Steel Letter Sets=sold
- Z06 Motorsports Wheels (17's front & 18's rear) (front tires are almost new, rears are still good) =450.00 1 bad rim
- Z06 Side Grill Set= SOLD
- B&B Tri-Flo "Bullet" Exhaust System= Sold
- C-5 Stainless Steel Exhaust Plate with Corvette Logo= 70
- Billet Side Spears=SOLD
- European Taillights complete with plugs and harness= sold
Transmission 37k miles - $600
Differential - $250
Steering Rack w/ Tie Rods, Boot, Lines, Dust Cover - $200
Windsheld -sold
Windshield Upper and Lower Reveal Moldings + Side Moldings - $125
Fixed Antenna w/ Mounting Bracket and Bushing - $30
Driver Side Inner Rear Fender Cover =20
Rear Right Quarter Panel EB - $175
Driver Window Weatherstrip - $40
Driver Door Shell + EB Outter Panel w/ Body Side Molding=sold
Passenger Window Weatherstrip - $40
Driver Door Trim Panel (Bose Grill + Black)- 100 ,$716 new from GM
Driver Knee Bolster (Black) - sold
Glove Box Assembly - sold
HVAC Head Unit - sold
Bose OEM GM CD Radio - sold
Interior (Main) Cabin Carpet (Black) - sold
Trim - $100
Black Sunvisors w/ Mirror and Lights - Passenger and Driver Side -sold
Driver Side A-Pillar Cover - 45
Black Radiator Cover - sold
Driver Side Door Window/Lock/Mirror Switch - sold
Cruise Control - . (Mounted Near PCM) - $100
Driver Side Door Control Module - $90
Power Steering Pump + Cooler + Reservoir + Hoses - $200
Passenger Side Window/Lock Switch - sold
Driver Door Hinges - sold
EBCM - Electronic Brake Control Module $225
Rear Fascia Energy Absorber - $75
Fuel Door EB - $20
Passenger Door Shell + EB Outter Panel w/ Body Side Molding - $200 $917 for shell + $550 for Outter Pannel
Rear Trunk Lid and window + Emblem - $299
Passenger Side A-Pillar Cover - $30
Tunnel Plate w/ Bolts - $45
Rear Cradle - $150 $950 new from GM
Left Tank Siphon Pump - $100 $722 new from GM
Left Tank Fuel Strap - $20 $86 new from GM
Right Tank Fuel Strap - $20 $87 new from GM
Vent Pipe + Filler Tube + Filler Cap - $30 $100 new from GM
Rear Left Quarter Panel EB - $150 $660 new from GM + Paint
Air Conditioning System (All Under Dash Components) - 100
Master Cylinder - $75 $380 new from GM
Brake Booster - $75 $517 new from GM
Air Conditioning Hardlines and Freon Canister - $80
Rear hatch w/ glass $299
BCM Module $150.00 shipped
Rear sway bar w/bushings $50
Dash (mint conditon)$100
Trunk release & Fog light switch $40.00 shipped
Driver & pass B-pillar trim w speaker cover $25.00 each / $70.00 f/ pair
Rear hatch seal (weatherstripping) no tears ,like new..$50.00 shipped
Front BOSE speaker assembly w/amp,woofer speaker (like new)$90.00 each side shipped
Traction control switch $$30.00 shipped
Interior door panels (like new) black $90.00 each side
Driver and pass door glass no scatches $40.00 each
Interior trim that goes around seat belt assm.= sold
Interior roof trim panel (blk) like new$40.00
Driver side door cntrl module $75.00 shipped
driver side door wiring harness $95.00 shipped
ABS Brake proportioning valve and mounting bracket $350.00 shipped
ITEMS THAT IM KEEPING
Engine, computer and exhaust manifolds
Front and rear suspension components (minus leaf springs and shocks)
Front and rear brakes, hubs, calipers and rotors (outer CV joints on rear)
Fuel tanks with pump(s) and flexible lines uncut
Radiator w/fans and plastic shroud
Wiring harness w/engine, throttle control, & ignition sections
Minor Components/Parts 1997-2004 Corvette C5
Tilt steering column w/stalks and Ignition switch
Flexible brake lines- calipers
Radiator fill tank
Wiper motor
Oxygen sensors (4)
Side & rear view mirrors
Exterior door handles and door window mechanisms
Seat belts
Vehicle speed sensor
E-brake handle/cables, Gas pedal
Hood latches w/ cable actuator
Car is Located in So. California. I can ship anywhere in the USA via fed ex freight or ups ground.
For those who are local. Car is located in Riverside ca. 92509
thanks
mike
951-256-0301
NEED THE LAST PARTS GONE QUICK.......
heres some updated pics.
Here Are Some Of The Upgrades:
- Viper Alarm- KV Motion Sensor=50.00 no remote
- Custom Auto Shift ****= sold
- Custom Auto Shift Boot=sold
- Custom Seats= sold
- Custom Console Cushion Arm Rest w/ Upper + Lower Cover + Fuel Release - SOLD
- Custom Loyd Mats=sold
- Custom Altec Sill Plates=sold
- Glass Top with Glass Top Shades= sold
- Front and Rear Bumper Polished Stainless Steel Letter Sets=sold
- Z06 Motorsports Wheels (17's front & 18's rear) (front tires are almost new, rears are still good) =450.00 1 bad rim
- Z06 Side Grill Set= SOLD
- B&B Tri-Flo "Bullet" Exhaust System= Sold
- C-5 Stainless Steel Exhaust Plate with Corvette Logo= 70
- Billet Side Spears=SOLD
- European Taillights complete with plugs and harness= sold
Transmission 37k miles - $600
Differential - $250
Steering Rack w/ Tie Rods, Boot, Lines, Dust Cover - $200
Windsheld -sold
Windshield Upper and Lower Reveal Moldings + Side Moldings - $125
Fixed Antenna w/ Mounting Bracket and Bushing - $30
Driver Side Inner Rear Fender Cover =20
Rear Right Quarter Panel EB - $175
Driver Window Weatherstrip - $40
Driver Door Shell + EB Outter Panel w/ Body Side Molding=sold
Passenger Window Weatherstrip - $40
Driver Door Trim Panel (Bose Grill + Black)- 100 ,$716 new from GM
Driver Knee Bolster (Black) - sold
Glove Box Assembly - sold
HVAC Head Unit - sold
Bose OEM GM CD Radio - sold
Interior (Main) Cabin Carpet (Black) - sold
Trim - $100
Black Sunvisors w/ Mirror and Lights - Passenger and Driver Side -sold
Driver Side A-Pillar Cover - 45
Black Radiator Cover - sold
Driver Side Door Window/Lock/Mirror Switch - sold
Cruise Control - . (Mounted Near PCM) - $100
Driver Side Door Control Module - $90
Power Steering Pump + Cooler + Reservoir + Hoses - $200
Passenger Side Window/Lock Switch - sold
Driver Door Hinges - sold
EBCM - Electronic Brake Control Module $225
Rear Fascia Energy Absorber - $75
Fuel Door EB - $20
Passenger Door Shell + EB Outter Panel w/ Body Side Molding - $200 $917 for shell + $550 for Outter Pannel
Rear Trunk Lid and window + Emblem - $299
Passenger Side A-Pillar Cover - $30
Tunnel Plate w/ Bolts - $45
Rear Cradle - $150 $950 new from GM
Left Tank Siphon Pump - $100 $722 new from GM
Left Tank Fuel Strap - $20 $86 new from GM
Right Tank Fuel Strap - $20 $87 new from GM
Vent Pipe + Filler Tube + Filler Cap - $30 $100 new from GM
Rear Left Quarter Panel EB - $150 $660 new from GM + Paint
Air Conditioning System (All Under Dash Components) - 100
Master Cylinder - $75 $380 new from GM
Brake Booster - $75 $517 new from GM
Air Conditioning Hardlines and Freon Canister - $80
Rear hatch w/ glass $299
BCM Module $150.00 shipped
Rear sway bar w/bushings $50
Dash (mint conditon)$100
Trunk release & Fog light switch $40.00 shipped
Driver & pass B-pillar trim w speaker cover $25.00 each / $70.00 f/ pair
Rear hatch seal (weatherstripping) no tears ,like new..$50.00 shipped
Front BOSE speaker assembly w/amp,woofer speaker (like new)$90.00 each side shipped
Traction control switch $$30.00 shipped
Interior door panels (like new) black $90.00 each side
Driver and pass door glass no scatches $40.00 each
Interior trim that goes around seat belt assm.= sold
Interior roof trim panel (blk) like new$40.00
Driver side door cntrl module $75.00 shipped
driver side door wiring harness $95.00 shipped
ABS Brake proportioning valve and mounting bracket $350.00 shipped
ITEMS THAT IM KEEPING
Engine, computer and exhaust manifolds
Front and rear suspension components (minus leaf springs and shocks)
Front and rear brakes, hubs, calipers and rotors (outer CV joints on rear)
Fuel tanks with pump(s) and flexible lines uncut
Radiator w/fans and plastic shroud
Wiring harness w/engine, throttle control, & ignition sections
Minor Components/Parts 1997-2004 Corvette C5
Tilt steering column w/stalks and Ignition switch
Flexible brake lines- calipers
Radiator fill tank
Wiper motor
Oxygen sensors (4)
Side & rear view mirrors
Exterior door handles and door window mechanisms
Seat belts
Vehicle speed sensor
E-brake handle/cables, Gas pedal
Hood latches w/ cable actuator
Car is Located in So. California. I can ship anywhere in the USA via fed ex freight or ups ground.
For those who are local. Car is located in Riverside ca. 92509
thanks
mike
951-256-0301
NEED THE LAST PARTS GONE QUICK.......
heres some updated pics.
Last edited by SDLIFE; 03-07-2010 at 09:09 PM.
#6
Former Vendor
Thread Starter
Member Since: Jan 2010
Location: Riverside Ca
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
#7
Racer
Just so everyone knows, this guy has had the car listed on craigslist for a while. So even though he's a new member, I'm sure he's on the up-and-up.
Mike, let me know when/where I can check it out. Might be a few things I'll take off your hands. I'm in Moreno Valley. Daytime works best for me.
Mike, let me know when/where I can check it out. Might be a few things I'll take off your hands. I'm in Moreno Valley. Daytime works best for me.
#8
Former Vendor
Thread Starter
Member Since: Jan 2010
Location: Riverside Ca
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
Just so everyone knows, this guy has had the car listed on craigslist for a while. So even though he's a new member, I'm sure he's on the up-and-up.
Mike, let me know when/where I can check it out. Might be a few things I'll take off your hands. I'm in Moreno Valley. Daytime works best for me.
Mike, let me know when/where I can check it out. Might be a few things I'll take off your hands. I'm in Moreno Valley. Daytime works best for me.
And you can come see the car any time 9-5 monday thru friday. Im located near the 91 frwy in downtown riverside area. Next to old spaggetti factory. give me a call.
Thanks
mike
951-256-0301
#9
Racer
My mistake but it does show you've been a member for all of a month. I'll give ya a call tomorrow. Selling mechanical stuff, too? If so, what gears did you have in it?
#12
Former Vendor
Thread Starter
Member Since: Jan 2010
Location: Riverside Ca
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
#13
Former Vendor
Thread Starter
Member Since: Jan 2010
Location: Riverside Ca
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
#15
Former Vendor
Thread Starter
Member Since: Jan 2010
Location: Riverside Ca
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
here are the only pics I have. My nephew just showed me how to do this..I will get a bunch of detailed pics tomorrow for you guys..
Last edited by SDLIFE; 02-18-2010 at 01:28 PM.
#18
Team Owner
Hi Mike, just thought I'd make a helpful suggestion or two.
On your list of parts, you need to specify if the car had the "automatic" HVAC (CJ2) or the "manual" (C60) setup. This makes a big difference on the HVAC head unit as well as the behind-the-dash assembly. The two systems are different.
Also, the R/F and the L/R spindles ("knuckles") are the same part number and are directly interchangeable. That means that someone looking for a L/F spindle can buy your R/R and it will fit perfectly. It gives people more options. PS, this same interchangeability holds true for R/F and L/R.
Also, on your most recent post you might want to show the year of the car as well.
HTH
PS, for those looking at parts, I purchased an item from Mike off this car and the sale went through smoothly w/o any problems whatsoever.
On your list of parts, you need to specify if the car had the "automatic" HVAC (CJ2) or the "manual" (C60) setup. This makes a big difference on the HVAC head unit as well as the behind-the-dash assembly. The two systems are different.
Also, the R/F and the L/R spindles ("knuckles") are the same part number and are directly interchangeable. That means that someone looking for a L/F spindle can buy your R/R and it will fit perfectly. It gives people more options. PS, this same interchangeability holds true for R/F and L/R.
Also, on your most recent post you might want to show the year of the car as well.
HTH
PS, for those looking at parts, I purchased an item from Mike off this car and the sale went through smoothly w/o any problems whatsoever.
#20
Mike,
You haven't listed a price for the "Custom Altec Sill Plates". Also, the "Billet License Frame" has vanished from the list...
Can you please send a pic of the "C-5 Stainless Steel Exhaust Plate with Corvette Logo"?
Thanks!
Jared
You haven't listed a price for the "Custom Altec Sill Plates". Also, the "Billet License Frame" has vanished from the list...
Can you please send a pic of the "C-5 Stainless Steel Exhaust Plate with Corvette Logo"?
Thanks!
Jared