Corbeau A4, FX1 Pro, Forza Racing Seats, Free Shipping, & 0% Financing for 1 year
#201
Well, here I go. How about A4's with black microsuede/leather with tracks, 5th hole and the seat heater. Do you know how good the lumbar is compared to my stock seats? I have a bad back and need the lumbar if it is not junk. So the seats price with lumbar, heat, and 5th hole. Also, the seats without lumbar and 5th hole, but with heat. +S/H to 20874. I am 5' 9" with 36 waist, these might be JUST RIGHT. Thanks
Last edited by dh305; 03-14-2011 at 11:29 PM.
#202
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
Well, here I go. How about A4's with black microsuede/leather with tracks, 5th hole and the seat heater. Do you know how good the lumbar is compared to my stock seats? I have a bad back and need the lumbar if it is not junk. So the seats price with lumbar, heat, and 5th hole. Also, the seats without lumbar and 5th hole, but with heat. +S/H to 20874. I am 5' 9" with 36 waist, these might be JUST RIGHT. Thanks
__________________
TPSMotorsports.com
Mike Mak
2705 Lafayette Street
Santa Clara, CA 95050
Phone #: 408/898-4632
Email #: MikeM@TPSMotorsports.com
Authorized dealer of Corbeau Seats, ECS Superchargers, Edelbrock SuperChargers, A&A Superchargers, Kooks, Whipple, Magnalow, Corsa, Borla. LG Motorsports, Procharger, Billy Boat Exhaust, AWE Exhaust, American Racing, TPS Brake Rotors/ Kits, Stainless Steel Brake Lines & much more...Mike Mak
2705 Lafayette Street
Santa Clara, CA 95050
Phone #: 408/898-4632
Email #: MikeM@TPSMotorsports.com
#207
Advanced
Member Since: Jan 2008
Location: Oceanside Kalifornia
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
I'm interested in black microsuede and leather with lumbar and heat. Also interested in labor for the install! I ride with the seat all the way down on the stockers...can I retain this driving position without shaving the seat bottom? Prices please!
#211
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
Thanks!
I'm not 100% sure... do you have the seats already?
#214
Race Director
Member Since: Sep 2004
Location: Cypress TX
Posts: 14,406
Likes: 0
Received 2 Likes
on
2 Posts
St. Jude Donor '07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18
I'm interested in either the FX1 or the Forza for my 2002 Z06 HPDE car. Can you explain the difference in the two and give me a quote on both please? Is there a better choice?
Thanks
Thanks
#216
Supporting Vendor
Thread Starter
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
Last edited by TPSMak; 04-05-2011 at 04:45 PM.
#217
Cruising
Member Since: Feb 2011
Location: Billings Montana
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Seats!
I get my seats today! Installing them tonight. Any suggestions on adding washers to adjust seat placement? I don't mind sitting forward as much but heard it's not as comfortable without the washers.
#218
Tech Contributor
I added a couple washers between the seat and the Corbeau bracket, and a couple under the corbeau bracket where it mates to the floor.
Go to Home Depot and get a couple black cara****** straps (pic below)
The lever is a little tricky to get to if you don't have a little strap on them. I actually went to Home depot and got 2x Carabiner's like the one below. I took off the carabiner, and only used the strap. I put a key chain ring at both ends of the strap. I drilled a small hole in the end of the lever (~1/2" from the tip) and attached one of the key chain rings thru the hole. I now just reach down and put my finger thru the key chain ring at the end of the strap to lift up. I can't take credit for that idea, the guy I met locally did the same... I got 2x black straps (not red)...
Toque
#220
Cruising
Member Since: Feb 2011
Location: Billings Montana
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Just make sure that you put the passenger seat on the drivers side, and vs versa.
I added a couple washers between the seat and the Corbeau bracket, and a couple under the corbeau bracket where it mates to the floor.
Go to Home Depot and get a couple black cara****** straps (pic below)
Toque
I added a couple washers between the seat and the Corbeau bracket, and a couple under the corbeau bracket where it mates to the floor.
Go to Home Depot and get a couple black cara****** straps (pic below)
Toque