FS: A&A Vortech S-Trim Kit + ECS Dual Nozzle Meth
#1
Pro
Thread Starter
FS: A&A Vortech S-Trim Kit + ECS Dual Nozzle Meth
I wrecked my 02 EB Z06 and decided to part out the set-up I was running. I am selling the Forged LS2 402 separately in the fore sale section.
1. A&A Supercharger Kit - SOLD
Vortech S-Trim Supercharger (Has CARB Number)
Vortech Blow Off Valve
Reichard Racing 3.1" 6-Rib Pulley w/ Pulley Walls (eliminates throwing the belt) - 11 PSI Boost at 6000 RPM
Original 3.8" 6-Rip Pulley - ~ 6 PSI Boost
Supercharger Pulley
A&A Intercooler
All Tubing Necessary
Gates K060888 Serpentine Belt
60 LB/HR Fuel Injectors
Kenne Bell Boost-A-Pump
2. Dual Nozzle Methanol Injection System (ECS) - SOLD
**Please note, this comes with the washer tank, and the blower tubing has the bung welded for a separate IAT allowing for proper placement of Meth nozzles. MAF, then Meth, then IAT.
Methanol Injection Electronic Controller
Methanol Pump
Corvette Washer Tank w/ Fittings Installed to it
Methanol Lines
Methenaol Injection Nozzles
2-Bar MAP Sensor
Separate IAT Sensor
Meth Set-Up - Clean and Complete. Done the Right way.
(a) MAF sensor located after the Intercooler.
(b) Methnal Nozzles Placed AFTER the MAF.
(c) Separate AL bung welded to the AL 45Deg tube for a separate IAT to monitor the air temperatures at the point where the Meth is sprayed
3. Brand New MAF Sensor - $200 Shipped! (housing on mine broke. used this new one for less than 500 miles before the accident)
4. Custom Ashtray Mount for Meth Controller + Boost Gauge SOLD
Custom Made Ashtray Mount for Boost Gauge and Meth Controller
Includes modified Center Console, custom made ashtray panel + Autometer Electronic Boost Gauge (this was $140 alone)
1. A&A Supercharger Kit - SOLD
Vortech S-Trim Supercharger (Has CARB Number)
Vortech Blow Off Valve
Reichard Racing 3.1" 6-Rib Pulley w/ Pulley Walls (eliminates throwing the belt) - 11 PSI Boost at 6000 RPM
Original 3.8" 6-Rip Pulley - ~ 6 PSI Boost
Supercharger Pulley
A&A Intercooler
All Tubing Necessary
Gates K060888 Serpentine Belt
60 LB/HR Fuel Injectors
Kenne Bell Boost-A-Pump
2. Dual Nozzle Methanol Injection System (ECS) - SOLD
**Please note, this comes with the washer tank, and the blower tubing has the bung welded for a separate IAT allowing for proper placement of Meth nozzles. MAF, then Meth, then IAT.
Methanol Injection Electronic Controller
Methanol Pump
Corvette Washer Tank w/ Fittings Installed to it
Methanol Lines
Methenaol Injection Nozzles
2-Bar MAP Sensor
Separate IAT Sensor
Meth Set-Up - Clean and Complete. Done the Right way.
(a) MAF sensor located after the Intercooler.
(b) Methnal Nozzles Placed AFTER the MAF.
(c) Separate AL bung welded to the AL 45Deg tube for a separate IAT to monitor the air temperatures at the point where the Meth is sprayed
3. Brand New MAF Sensor - $200 Shipped! (housing on mine broke. used this new one for less than 500 miles before the accident)
4. Custom Ashtray Mount for Meth Controller + Boost Gauge SOLD
Custom Made Ashtray Mount for Boost Gauge and Meth Controller
Includes modified Center Console, custom made ashtray panel + Autometer Electronic Boost Gauge (this was $140 alone)
Last edited by charoog96; 04-05-2010 at 07:03 PM.
#4
#5
Pro
Thread Starter
please contact me, have someone interested in supercharger kit... pm or email-
andy@dynotuneusa.com
andy@dynotuneusa.com
#7
Pro
Thread Starter
#8
Le Mans Master
Is it the latest A&A bracket? Let me know if you want to sell any of the SC items seperately, might be interested in a few things. bracket, pulleys, injectors, MAF, some tubing,etc.
Last edited by 95wht6spd; 03-24-2010 at 11:26 PM.
#9
Pro
Thread Starter
#11
Pro
Thread Starter
#15
Pro
Thread Starter
Who needs a dual nozzle meth kit w/ a customized controller mount and boost gauge?! This kit is a direct bolt-on with all the "figuring out" already taken care of!