XSPower C5 Longtube Headers
#2381
Burning Brakes
Engine mounts? I think they are quite easy!! Support the bottom of the engine with a jack, remove the 2 lower and upper nuts per side on the mount. Take off the (3) bolts per side of the mount pedestal and pull them out, toss the new in and re-install the (6) bolts and (4) nuts
I did mine on a lift and had a hell of a time. The driver's side was reasonably easy, but the passenger side required some serious hand contortion. Not to mention, dropping the subframe and raising the engine. You can't raise the engine enough to get the mount out on either side.
Unless I did something wrong.
#2382
Former Vendor
Thread Starter
With the headers and starter and everything installed!??!
I did mine on a lift and had a hell of a time. The driver's side was reasonably easy, but the passenger side required some serious hand contortion. Not to mention, dropping the subframe and raising the engine. You can't raise the engine enough to get the mount out on either side.
Unless I did something wrong.
I did mine on a lift and had a hell of a time. The driver's side was reasonably easy, but the passenger side required some serious hand contortion. Not to mention, dropping the subframe and raising the engine. You can't raise the engine enough to get the mount out on either side.
Unless I did something wrong.
No need to drop the cradle, just support the engine and remove the mounts and pedestals. If pinched lower or raise engine a bit with your jack and put they come!
I would recommend doing them with the headers however not required unless your stock mounts are old and worn out
#2383
Burning Brakes
well considering we are talking about doing them with headers, it makes it easiest to do during your header install before you put the headers on, and the starter dropped for the header install as well!
No need to drop the cradle, just support the engine and remove the mounts and pedestals. If pinched lower or raise engine a bit with your jack and put they come!
I would recommend doing them with the headers however not required unless your stock mounts are old and worn out
No need to drop the cradle, just support the engine and remove the mounts and pedestals. If pinched lower or raise engine a bit with your jack and put they come!
I would recommend doing them with the headers however not required unless your stock mounts are old and worn out
In fact, you may want to consider recommending that to people as it would help alleviate claimed "fitment" issues because the factory mounts are toast.
#2385
Former Vendor
Thread Starter
Limited supply of OFFROAD Systems available and on SALE!
$100 off plus FREE Shipping!
$674.99 SHIPPED for off-road systems. Only (20) left, get them while available!
Order direct here: https://huronspeed.com/product/xspow...header-system/
$100 off plus FREE Shipping!
$674.99 SHIPPED for off-road systems. Only (20) left, get them while available!
Order direct here: https://huronspeed.com/product/xspow...header-system/
#2386
Racer
Headers and xpipe
Hello John, I'm a newbie to CF and slowly learning my way around here. How much for 1 3/4" headers and xpipe with and without cats? Is shipping free? Any discount for seniors and veterans? Ty for helping me. Your name came up plenty of times with much respect given.
#2387
Racer
[QUOTE=Rlb2002vette;1597491638]Hello John, I'm a newbie to CF and slowly learning my way around here. How much for 1 3/4" headers and xpipe with and without cats? Is shipping free? Any discount for seniors and veterans? Ty for helping me. Your name came up plenty of times with much respect given. 1999 auto plain C-5
#2388
Former Vendor
Thread Starter
Hello John, I'm a newbie to CF and slowly learning my way around here. How much for 1 3/4" headers and xpipe with and without cats? Is shipping free? Any discount for seniors and veterans? Ty for helping me. Your name came up plenty of times with much respect given.
currently only off-road in stock and for discount currently as well at $674.99 plus free shipping! I cannot combine a military discount with an item on sale already but send me an email at jon@huronspeed.com and I will see if I can pull any strings
https://huronspeed.com/product/xspow...header-system/
#2391
Former Vendor
Thread Starter
Yes we can however it will require shipping of the exhaust to us from XSPower and then to you so the cost may be more than having it done locally if you have that option.