FS: Baer/Alcon big brake kit
#1
Melting Slicks
Thread Starter
Member Since: Sep 2003
Location: Wesley Chapel Fl
Posts: 3,306
Likes: 0
Received 0 Likes
on
0 Posts
FS: Baer/Alcon big brake kit
I have a set of Baer/Alcon big brake kit for sale. 6 piston radial mount front calipers and 4 piston radial mount rear calipers. Included with sale are 2 front calipers, used SBS brake pads with plenty of life, 2 front mount brackets, 2 rear brake calipers, 1 set of used brake pads with plenty of life, 1 set of new (rear) pads, 2 rear mounting brackets, 4 Goodridge stainless steel brake lines, 2 14" cross drilled and slotted front rotors, and 2 13.5" cross drilled and slotted rear rotors. I also have one spare rear rotor without the hat. I can not recall why I have it but it is included. I should have one brand new rear mounting bracket which is also included once I find it. If I do not find it I will purchase another new one from Baer for the buyer. One should be replaced because I machined it to get the caliper in the center of the rotor. Turned out that my OEM spindle was out of whack and once I replaced that all was good.
I put around 2k miles on these brakes. If I recall correctly I purchased the fronts used from another forum member and the rears brand new from Baer. I have never had a problem with these brakes. I have given them a good cleaning as you can see in the photos. The rotors have surface rust on them from being washed. You can see the rotor hats have been powder coated red and the original bolts were replaced with ones I had made. They are chrome plated 12 point bolts to match the bolts on the HRE wheels. These have not been used since 05. I am going to clean up the brackets a bit more before packing them but there is surface rust on the bolt heads.
5000.00 obo plus shipping. Pick up is fine.
I put around 2k miles on these brakes. If I recall correctly I purchased the fronts used from another forum member and the rears brand new from Baer. I have never had a problem with these brakes. I have given them a good cleaning as you can see in the photos. The rotors have surface rust on them from being washed. You can see the rotor hats have been powder coated red and the original bolts were replaced with ones I had made. They are chrome plated 12 point bolts to match the bolts on the HRE wheels. These have not been used since 05. I am going to clean up the brackets a bit more before packing them but there is surface rust on the bolt heads.
5000.00 obo plus shipping. Pick up is fine.
Last edited by EatRice; 05-02-2012 at 09:44 AM. Reason: added a photo