WTB: Oxygen sensors and extenders
#1
Rass Claat Viper
Thread Starter
WTB: Oxygen sensors and extenders
What I really need are the extenders since my long tubes bung is so far back, its putting a strain on the whole wiring harness. Would mind having an extra set of O2's in my toolbox as well.
#2
i have a brand new pair of 02 extensions i didnt need to use for my 99 c5 they cost me 48 shipped. im asking 40 bucks shipped
http://www.racetronix.biz/itemdesc.a...4F-24T&eq=&Tp=
http://www.racetronix.biz/itemdesc.a...4F-24T&eq=&Tp=
#6
Former Vendor
I would be happy to help you with new if you decide to go that route. Please feel free to visit our website (www.PartsTaxi.com), shoot me an email at kevin@partstaxi.com, or call me at 302-883-0227. I look forward to helping you!
Thanks
Kevin
www.PartsTaxi.com
Thanks
Kevin
www.PartsTaxi.com
#8
Team Owner
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 28,846
Received 1,762 Likes
on
1,529 Posts
I would be happy to help you with new if you decide to go that route. Please feel free to visit our website (www.PartsTaxi.com), shoot me an email at kevin@partstaxi.com, or call me at 302-883-0227. I look forward to helping you!
Thanks
Kevin
www.PartsTaxi.com
Thanks
Kevin
www.PartsTaxi.com
#11
Rass Claat Viper
Thread Starter
No luck? Willing to trade I have the extenders with white square connections, of no use to me. Rather trade than junk them but either way I need the flat black connector.
#14
Former Vendor
I would be happy to help you with new if you decide to go that route. Please feel free to visit our website (www.PartsTaxi.com), shoot me an email at kevin@partstaxi.com, or call me at 302-883-0227. I look forward to helping you!
Thanks
Kevin
www.PartsTaxi.com
Thanks
Kevin
www.PartsTaxi.com
#15
Racer
buy rear o2's for the front positions. They're longer so you won't need extensions, but will need the square to flat adapters for the connectors. Don't buy regular fronts, you'll just be throwing your money away. You'll set DTC's with them...
do a search for long tubes/oxygen sensors/dtc and you'll see why.
Only buy original GM/ac delco. You can gamble on some used ones, but I'd go with new ones.
If you do want to gamble on used ones, Vettenuts has them:
http://www.vettenuts.net/index.php?l...t_detail&p=137
do a search for long tubes/oxygen sensors/dtc and you'll see why.
Only buy original GM/ac delco. You can gamble on some used ones, but I'd go with new ones.
If you do want to gamble on used ones, Vettenuts has them:
http://www.vettenuts.net/index.php?l...t_detail&p=137
#17
Racer
adapters are just $10 each : http://www.racetronix.biz/itemdesc.a...LS1-O2&eq=&Tp=
If you've deleted the rear o2s, you technically don't need the adapters if you're will to swap the pins in the PCM connector. That way you can connect your new upstream o2s (with square connector) directly to the original rear connector that will then be directed to the front o2 pcm inputs...
Oh, and if you have deleted the rears, then you won't need to buy new ones (assuming they're good). Just plug the rear bungs, and swap the old rear to the front...
Last edited by Caliber350; 07-25-2012 at 09:15 PM.
#18
Rass Claat Viper
Thread Starter
My rear O2's have been deleted, and while I did not want to buy new sensors, its not that big a deal. With those connectors and the new O2's I should be in the race yes?
#19
Racer
Yup, that'll do it.
Just remember that the front o2s go to the connectors on their respective sides, unlike the rears which cross to the opposite side. It's fairly common mistake to cross the fronts...
Just remember that the front o2s go to the connectors on their respective sides, unlike the rears which cross to the opposite side. It's fairly common mistake to cross the fronts...