FS: CCW LM20 Rims and Tires for C5 rear fender flare setup (new Condition)
07-12-2012, 12:12 PM
#1
Drifting
Thread Starter
SOLD: CCW LM20 Rims and Tires for C5 rear fender flare setup
SOLD
Extreme performance and traction with car show appearance...
CCW LM20 rims and tires for C5 rear fender flare setup. Used less than 200 miles. Mounted and Balanced with TPMS sensors installed... Ready to roll
I paid $4,104 plus shipping
> Prefer local pickup. If shipped, buyer pays 100% of shipping cost from zip code 08854 (located in central NJ)
Description:
CCW LM20 Rims: 3 piece design with 6061-T6 Aluminum centers, Spun Aluminum lips with CCW engraved caps
Fronts: 18x10” LM20's (7.75" backspace) with Nitto NT05 265/35ZR18 tires.
Rears: 18x13” LM20's (8.75" backspace) with Mickey Thompson 345/35R18 ET Street Radial II tires.
Tires are mounted, balanced and include tire pressure monitoring sensors (TPMS). Ready to roll (as is), the fronts weight 53 lbs. each and the rears weigh 64 lbs. each. These are made for wide rear quarter panels (fender flares), such as the Lewis-5; which is what I have on my 2003 C5 coupe.
You can view specs on the rims at: http://www.ccwheel.com/wheelprofiles...ay.php?id=LM20
Front Tire Specs: http://www.nittotire.com/Tire/nt05
Rear Tire Specs: http://www.mickeythompsontires.com/s...StreetRadialII
Photos of rims and tires off car were taken on 7/6/12
- Thank you
Extreme performance and traction with car show appearance...
CCW LM20 rims and tires for C5 rear fender flare setup. Used less than 200 miles. Mounted and Balanced with TPMS sensors installed... Ready to roll
I paid $4,104 plus shipping
> Prefer local pickup. If shipped, buyer pays 100% of shipping cost from zip code 08854 (located in central NJ)
Description:
CCW LM20 Rims: 3 piece design with 6061-T6 Aluminum centers, Spun Aluminum lips with CCW engraved caps
Fronts: 18x10” LM20's (7.75" backspace) with Nitto NT05 265/35ZR18 tires.
Rears: 18x13” LM20's (8.75" backspace) with Mickey Thompson 345/35R18 ET Street Radial II tires.
Tires are mounted, balanced and include tire pressure monitoring sensors (TPMS). Ready to roll (as is), the fronts weight 53 lbs. each and the rears weigh 64 lbs. each. These are made for wide rear quarter panels (fender flares), such as the Lewis-5; which is what I have on my 2003 C5 coupe.
You can view specs on the rims at: http://www.ccwheel.com/wheelprofiles...ay.php?id=LM20
Front Tire Specs: http://www.nittotire.com/Tire/nt05
Rear Tire Specs: http://www.mickeythompsontires.com/s...StreetRadialII
Photos of rims and tires off car were taken on 7/6/12
- Thank you
Last edited by digivex; 12-29-2012 at 02:36 PM. Reason: These have been sold
07-12-2012, 12:48 PM
#3
Drifting
Thread Starter
I race the car (8.90 Index Drag Racing) and it is almost never street driven - The last few street rides were on DOT approved Hoosiers on my Weld racing rims. I've never used the CCW LM20s on the drag strip. It's a shame to let these sit in my garage and never get used. So, I am starting to sell the parts that are more for street use and taking up the limited space I have at home. At present, I have 14 rims & tires, which is getting a bit 
-- Pretty soon I am going to end up on some TV show like "Hoarders" 
-- Pretty soon I am going to end up on some TV show like "Hoarders"
Last edited by digivex; 07-12-2012 at 12:56 PM. Reason: fixed typos
07-12-2012, 01:15 PM
#4
Drifting
I race the car (8.90 Index Drag Racing) and it is almost never street driven - The last few street rides were on DOT approved Hoosiers on my Weld racing rims. I've never used the CCW LM20s on the drag strip. It's a shame to let these sit in my garage and never get used. So, I am starting to sell the parts that are more for street use and taking up the limited space I have at home. At present, I have 14 rims & tires, which is getting a bit -- Pretty soon I am going to end up on some TV show like "Hoarders"
-- Pretty soon I am going to end up on some TV show like "Hoarders" 
07-16-2012, 09:10 AM
#6
Drifting
Thread Starter
Thanks for the bump Jay 
- All PM's have been answered
I'll also update the description with the backspacing for those who have asked: Backspacing on the rear rims is 8.75" and 7.75" on the fronts
- All PM's have been answered
I'll also update the description with the backspacing for those who have asked: Backspacing on the rear rims is 8.75" and 7.75" on the fronts
07-17-2012, 03:35 PM
#10
Burning Brakes
Wish you were closer. I getting ready to do the L5's on mine but not sure what rims I want yet or can fit in my budget. Paint is way more then i expected. Might be stuck with my small EVO Slashers for awhile
10-09-2012, 12:59 PM
#16
Race Director
Member Since: Mar 2006
Location: Everywhere and Nowhere at all
Posts: 15,357
Received 1,679 Likes
on
1,135 Posts
Bump for a great guy!! I purchased my PFADT Sway bars from him.. Exactly as described, fast shipping w tracking numbers.. All around GOOD GUY!
Free bump Dave
Free bump Dave
10-09-2012, 01:01 PM
#17
Race Director
Member Since: Mar 2006
Location: Everywhere and Nowhere at all
Posts: 15,357
Received 1,679 Likes
on
1,135 Posts
If i didnt already have my HRE's... I'd be all over these...
10-09-2012, 01:21 PM
#18
Melting Slicks
I'm checking with CCW to see if these will clear my 365mm rotors. Anybody want to buy the tires?
