FS: CCW T-10s
#1
Drifting
Thread Starter
Member Since: Jun 2007
Location: Hopewell Junction NY
Posts: 1,864
Likes: 0
Received 0 Likes
on
0 Posts
FS: CCW T-10s
I have a set of CCW T-10s for sale. They are in near pristine condition. There is a small nic on one of the rears that can be repaired since they are polished aluminum. The tires are Nitto Invos, 285 x 30 x 19 in the front and 305 x 30 x 19 in the rear. The tire tread left is, 4/32s left in the rear. One front has 7/32nds and one is brand new due to a mistake by a body shop. The front wheels are 19x 10 and the rears are 19x11.5. They do not fit big brake kits. They have been sitting around for months now so they will need to be cleaned and polished.
I would prefer a local sale but would explore shipping options. Price is $2,500.
Picture of nic on rear wheel
I would prefer a local sale but would explore shipping options. Price is $2,500.
Picture of nic on rear wheel
Last edited by Bigcountry7; 01-06-2013 at 08:36 PM.
#3
Drifting
Thread Starter
Member Since: Jun 2007
Location: Hopewell Junction NY
Posts: 1,864
Likes: 0
Received 0 Likes
on
0 Posts
#6
if you decide to ship pm me
#9
Drifting
Are the rears 11.5 or bigger? it sounded like you weren't sure.. did you use them with fender flares or spacers? also what size lips are on fronts and rears?
Last edited by JFG Racing #1; 09-20-2012 at 11:41 AM.
#10
Drifting
Thread Starter
Member Since: Jun 2007
Location: Hopewell Junction NY
Posts: 1,864
Likes: 0
Received 0 Likes
on
0 Posts
Rich
#11
Drifting
Thread Starter
Member Since: Jun 2007
Location: Hopewell Junction NY
Posts: 1,864
Likes: 0
Received 0 Likes
on
0 Posts
#12
Le Mans Master
GLWS... As a repeat offender as John calls me... He will only put 11.5 rears on c5's. You cant get the 3" lip with an 11" rear wheel. Your fronts should be 10" as well.
#15
Drifting
Member Since: May 2006
Location: Arlington Texas, originally from San Angelo, TX
Posts: 1,871
Likes: 0
Received 0 Likes
on
0 Posts
#16
Drifting
Thread Starter
Member Since: Jun 2007
Location: Hopewell Junction NY
Posts: 1,864
Likes: 0
Received 0 Likes
on
0 Posts
I bought them from a forum member a couple of years ago and can't find the thread or messages. I called John and he believes they are most likely 19x11 but to be certain I will have them measured.
#17
Drifting
Thread Starter
Member Since: Jun 2007
Location: Hopewell Junction NY
Posts: 1,864
Likes: 0
Received 0 Likes
on
0 Posts
My mechaninc measured the wheels with measuring calipers, the fronts are 19x10.5 and the rears 19x12.
Last edited by Bigcountry7; 11-06-2012 at 11:31 AM.
#19
Melting Slicks
I bet your mechanic is measuring outer-lip to outer-lip - that's why yours are 1/2" wider than the typical 19" CCW sizes. CCW says the proper way to measure is inner-lip to inner-lip...which would probably make your wheels 19x10 / 19x11.5
#20
Drifting
Thread Starter
Member Since: Jun 2007
Location: Hopewell Junction NY
Posts: 1,864
Likes: 0
Received 0 Likes
on
0 Posts
I would imagine you are correct. I thought 19x 10.5 seemed large for the front. I apologize for the confusion. I really should have had this straightened out. I thought I was right to begin with, but when others questioned the correctness of the sizes I posted than I did also and wanted to get to the bottom of it. He definitely did measure outer lip to outer lip which would make the correct sizes what I had originally stated, 19x10 and 19x11.5. Thank you very much for clearing that up for me. I apologize to everyone for my haste. Wheel sizes as you can see, are not my area of expertise.