HSW 90mm Plate LS1 LS2 Nitrous Kit
09-24-2012, 07:29 PM
#1
Intermediate
Thread Starter
Member Since: Jul 2010
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
HSW 90mm Plate LS1 LS2 Nitrous Kit
Brand new, still in the packaging, Harris Speed Works 90mm wet nitrous plate kit. The kit is complete and includes everything needed to get you started. The 90mm plate will work on LS1 equipped vehicles with a 90mm intake manifold or basically any other LS motor with a 90mm intake manifold...LS2
"Description: HSW has once again upped the ante on the competition. This time with the 'Sudden Impact' line of nitrous plate kits! Beginning with the highest quality stainless steel and aluminum blocks, each piece is precisely CNC machined to the strictest tolerances. Not only does this produce the finest looking components, but it also ensures that each component performs consistently and at the highest level of performance available. This is not a universal type kit that the competition passes off as vehicle specific. Each system is custom tailored to fit a specific vehicle platform to provide a professional, neat and secure installation.
EFI Plate Information: Each plate features a full conical 360 degree perimeter style spray pattern for less turbulent intake charge compared to single/multi port spray pattern plates. Using advanced machining techniques, each hole is precision aimed at one another to allow for a complete atomization of fuel particles. This perimeter pattern creates a fine mist at the center of the incoming air stream which can be equally distributed throughout the intake manifold. Something that the competition cannot claim!
EFI Plate Size: 90mm [F.A.S.T. | LS2 | LS3 | L76 | LS7 90mm Intake Manifold]
Included Jet Sizes: 75 HP, 100 HP, 125 HP, and 150 HP. Jetting rated at the rear wheels (RWHP).
Kit Component Construction: Anodized Aluminum & Stainless Steel."
asking $500 or a little less picked up. I live in Chicago
"Description: HSW has once again upped the ante on the competition. This time with the 'Sudden Impact' line of nitrous plate kits! Beginning with the highest quality stainless steel and aluminum blocks, each piece is precisely CNC machined to the strictest tolerances. Not only does this produce the finest looking components, but it also ensures that each component performs consistently and at the highest level of performance available. This is not a universal type kit that the competition passes off as vehicle specific. Each system is custom tailored to fit a specific vehicle platform to provide a professional, neat and secure installation.
EFI Plate Information: Each plate features a full conical 360 degree perimeter style spray pattern for less turbulent intake charge compared to single/multi port spray pattern plates. Using advanced machining techniques, each hole is precision aimed at one another to allow for a complete atomization of fuel particles. This perimeter pattern creates a fine mist at the center of the incoming air stream which can be equally distributed throughout the intake manifold. Something that the competition cannot claim!
EFI Plate Size: 90mm [F.A.S.T. | LS2 | LS3 | L76 | LS7 90mm Intake Manifold]
Included Jet Sizes: 75 HP, 100 HP, 125 HP, and 150 HP. Jetting rated at the rear wheels (RWHP).
Kit Component Construction: Anodized Aluminum & Stainless Steel."
asking $500 or a little less picked up. I live in Chicago
10-10-2012, 09:51 PM
#3
Instructor
Member Since: Aug 2012
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
