blackdak318

I'm in the middle of a Heads/Cam swap on my 2002 Z06 and will also be putting a FAST 90mm on the car. Looking for a LS1/6 to LS2 90mm ELECTRONIC adapter.

Also looking for button head bolts for the valley cover if somone has some cheap.

CarBoy

I have a harness adapter, but I have to get it out from underneath the snout of the intake. It pretty much new. The 102 TB I bought wasn't working out so I put a 95mm on and it had the C5 motor and TPS on it.

The bolts you're looking for can be had at Lowes or Home Depot.
Or if you like I'll go buy them for you and charge you twice as much

Greg_E

McMaster-Carr also has a wide assortment of button head screws, or any type of bolt or screw for that mattter.

eleonb

try this....http://www.ebay.com/itm/CBM-10708-LS...item337bdd7fec....

blackdak318

Thanks guys but I'm not looking for a mechanical connector. I need the ELECTRICAL connector to make my LS6 function properly with a LS2 TB.

Something like this:
http://www.racetronix.biz/itemdesc.a...2DTBAH&eq=&Tp=

alextz

casper electronics makes a harness, they run like $50 or so