Crank Pulley Pin/drill kit
#1
Drifting
Thread Starter
Member Since: Aug 2006
Location: Florida
Posts: 1,719
Received 0 Likes
on
0 Posts
St. Jude Donor '07
Crank Pulley Pin/drill kit
FS: Crank Pulley Pin/drill kit $99.00 shipped
1- Drill alignment tool machined from C1018 grade steel
1- Heat-resist Cobalt Stl Short-length Drill Bit, 1/4", 2-1/2"
1 -black finish class 10.9 steel hex head cap screw, M16, 120 MM length, 2 MM pitch.
4- Pins, W1 Tool Steel Rod, .2500" Diameter (one pin required per crank)
Recommend reassemble with ARP bolt ARP234-2503
The LS series engine OEM crankshafts and crank harmonic balancer pulleys are not designed with a keyway. Often after reassembly the crank harmonic balancer pulley will rotate on the crank and work it self loose.
The Crank Pulley Pin/drill kit will prevent that common problem. Any questions call Steve 321-987-7741
1- Drill alignment tool machined from C1018 grade steel
1- Heat-resist Cobalt Stl Short-length Drill Bit, 1/4", 2-1/2"
1 -black finish class 10.9 steel hex head cap screw, M16, 120 MM length, 2 MM pitch.
4- Pins, W1 Tool Steel Rod, .2500" Diameter (one pin required per crank)
Recommend reassemble with ARP bolt ARP234-2503
The LS series engine OEM crankshafts and crank harmonic balancer pulleys are not designed with a keyway. Often after reassembly the crank harmonic balancer pulley will rotate on the crank and work it self loose.
The Crank Pulley Pin/drill kit will prevent that common problem. Any questions call Steve 321-987-7741
Last edited by FLORIDA; 07-15-2013 at 10:51 AM.