F/s LS7 Clutch upgrade kit cheap
#1
Former Vendor
Thread Starter
F/s LS7 Clutch upgrade kit cheap
pkc6ls7clutchkit
note: the clutch will work in any LS6 / LS1 but must be mated with the ls7 flywheel.
Stock at our warehouse so you can count on us!
Looking forward to conducting business,
-Mike W.
GmPartsDirect.com
Last edited by GmPartsDirect.com; 04-12-2013 at 12:35 PM.
#3
Former Vendor
Thread Starter
Awesome Josh! Just wanted to give you a heads up we received your order and it is processing! We really appreciate your business!
Keep them orders rolling guys! PM us if you need anything we are here to help!
Mike W.
GmPartsDirect.com
Keep them orders rolling guys! PM us if you need anything we are here to help!
Mike W.
GmPartsDirect.com
#5
Melting Slicks
#6
Former Vendor
Thread Starter
Hey Wayne!
24264180 - LS6 Slave Cylinder – $118.85
12564455 - LS6 Master Cylinder – $116.75
14061685 – Pilot Bearing – $11.68
+S&H
And remember if by any chance you find them elsewhere shipped to your door for cheaper make sure to PM me the link and I'll see what i can do to beat that total price!
Thanks for the interest man! hope to be able to do business soon!!
-Mike
#7
Melting Slicks
Hey Wayne!
24264180 - LS6 Slave Cylinder – $118.85
12564455 - LS6 Master Cylinder – $116.75
14061685 – Pilot Bearing – $11.68
+S&H
And remember if by any chance you find them elsewhere shipped to your door for cheaper make sure to PM me the link and I'll see what i can do to beat that total price!
Thanks for the interest man! hope to be able to do business soon!!
-Mike
24264180 - LS6 Slave Cylinder – $118.85
12564455 - LS6 Master Cylinder – $116.75
14061685 – Pilot Bearing – $11.68
+S&H
And remember if by any chance you find them elsewhere shipped to your door for cheaper make sure to PM me the link and I'll see what i can do to beat that total price!
Thanks for the interest man! hope to be able to do business soon!!
-Mike
#8
Former Vendor
Thread Starter
Hello Wayne,
The clutch slave dose indeed come with the release bearing and the hose to the disconnect, as for the master cylinder it dose come with the fluid reservoir and the hose from the disconnect to the master!
and let me know if you have any other questions!
Thanks man,
-Mike W.
#9
Melting Slicks
Hello Wayne,
The clutch slave dose indeed come with the release bearing and the hose to the disconnect, as for the master cylinder it dose come with the fluid reservoir and the hose from the disconnect to the master!
and let me know if you have any other questions!
Thanks man,
-Mike W.
The clutch slave dose indeed come with the release bearing and the hose to the disconnect, as for the master cylinder it dose come with the fluid reservoir and the hose from the disconnect to the master!
and let me know if you have any other questions!
Thanks man,
-Mike W.
#13
Former Vendor
Thread Starter
Awesome! PM sent Sir!
Unfortunately as of now we are not offering a light weight flywheel for the ls7, however we may peruse looking into it as becoming a vender at a later date. Personally as far as aluminum flywheels go I would recommend a Fidanza (13lb) or a RAM(19.5lb)as for the fidanza it has screws where you can change out the mating surface. As for the Ram the only down fall is it's mating surface is riveted iirc in so it makes changing out the steel mating surface not so easy
thanks for the interest sorry I couldn't really help,
Mike W.
GmPartsDirect.com
#14
Advanced
Member Since: Dec 2010
Location: Springfield Missouri
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
I have already installed a brand new slave cylinder which was a stock replacement part for my 1999 FRC. Will I need to buy a different slave cylinder or shims to install the LS7 clutch and flywheel?
#15
Former Vendor
Thread Starter
Thanks ,
Mike W.
GmPartsDirect.com
#16
Former Vendor
Thread Starter
There has been quite the interest in new replacement bolts which i would highly suggest during your replacement
flywheel bolts (each you need 6)
11569956
and
Pressure plate bolts (each you need 6)
12561465
Thanks to everyone who has ordered we are expecting another shipment to come in tomorrow or the following day as these have been selling like wildfire!
-Mike W.
GmPartsDirect.com
flywheel bolts (each you need 6)
11569956
and
Pressure plate bolts (each you need 6)
12561465
Thanks to everyone who has ordered we are expecting another shipment to come in tomorrow or the following day as these have been selling like wildfire!
-Mike W.
GmPartsDirect.com
#20
Melting Slicks
I want to upgrade to the LS7 clutch but unsure on what I need. I have to get my tranny rebuilt due to bad syncros. So since im taking out the tranny might as well replace the clutch as it has 50K miles on it (still runs strong and no slippage). What all do I need to replace and can you give me p/n and price please?