02 Z06, chassis, cradles, control arms, uprights, axles
#1
02 Z06, chassis, cradles, control arms, uprights, axles
Chassis, front clip replaced, gusseted after welded and put on a frame jig, very straight and strong. FB firewall removed, steel framed sheet metal firewall is nearly done, bracing out past where frame was sectioned, this is now far stronger than the stock frame ever was.
Front and rear subframes, control arms, uprights, spindles, rear axles, all appear completely serviceable.
Most of the control arm bushings have been removed, I could press out the rest if needed. I also have a first gen set of Phadt bushings which are great if you add zerts to the control arms like I did on my C6 you can lube it with marine grade grease in minutes and have a very good low cost, easy to maintain setup.
I am not sure what to ask for this so let's start with this price, if way off let me know, make offers, etc.....$2900 OBO.
---------------
I also have a complete 53 Studebaker body, first year, no posts, glass included, I was going to built the ultimate pro tour car out of it(meaning pure performance to actually use on the street, track, open road events....) AZ car, barely any rust, very solid, $3900 OBO.
---------------
I am going full time RV, taking a track car with me, need to get these sold soon, can possibly deliver to the right location.
Somebody needs to build this Studevette, it would be one of a kind( I did find another partially done but it was a trailer queen, cruiser at the most build, not a real car the way I see things, I build things to drive the sheat out of them
VERY open to offers and I need a few more parts for my LS/M3 build.
Thanks
Rick
801-829-4997
Front and rear subframes, control arms, uprights, spindles, rear axles, all appear completely serviceable.
Most of the control arm bushings have been removed, I could press out the rest if needed. I also have a first gen set of Phadt bushings which are great if you add zerts to the control arms like I did on my C6 you can lube it with marine grade grease in minutes and have a very good low cost, easy to maintain setup.
I am not sure what to ask for this so let's start with this price, if way off let me know, make offers, etc.....$2900 OBO.
---------------
I also have a complete 53 Studebaker body, first year, no posts, glass included, I was going to built the ultimate pro tour car out of it(meaning pure performance to actually use on the street, track, open road events....) AZ car, barely any rust, very solid, $3900 OBO.
---------------
I am going full time RV, taking a track car with me, need to get these sold soon, can possibly deliver to the right location.
Somebody needs to build this Studevette, it would be one of a kind( I did find another partially done but it was a trailer queen, cruiser at the most build, not a real car the way I see things, I build things to drive the sheat out of them
VERY open to offers and I need a few more parts for my LS/M3 build.
Thanks
Rick
801-829-4997
Last edited by raam; 04-30-2013 at 02:21 PM.
#3
I also have a 1953 Studebaker body, complete, AZ car, for the ultimate pro tour build and will make somebody a killer deal on it with the chassis, maybe without it if needed
Rick
Rick
#7
Getting close to going full time RV so these things need a new home, soon!
Anybody with decent fab skills and shop gear could build the most incredible one of a kind car ever done with the Vette chassis and Studdy body, it is not really that hard to do. I have built it a few times in my head already so the allure of doing it has worn off but it would be one F'in fun car when done
Anybody with decent fab skills and shop gear could build the most incredible one of a kind car ever done with the Vette chassis and Studdy body, it is not really that hard to do. I have built it a few times in my head already so the allure of doing it has worn off but it would be one F'in fun car when done
#8
I still have this chassis, control arms, etc and willing to make a great deal as going full time RV soon.
It is far stronger than stock, will make a great race car, pro tour project chassis, etc...
I have the 53 Studbaker body for it but will separate also.
Thanks
Rick
801-829-4997
It is far stronger than stock, will make a great race car, pro tour project chassis, etc...
I have the 53 Studbaker body for it but will separate also.
Thanks
Rick
801-829-4997
#9
Wow, old thread, I still have this chassis, suspension parts, axles, etc...
And the 53 body as well as forged LS1, built a true supercar/pro tour for a great price and be like none other in the world
And the 53 body as well as forged LS1, built a true supercar/pro tour for a great price and be like none other in the world
#13
I have plenty of chassis pictures but have not had the time to post them, barely online lately, send email if you want some, I will send them out asap
ram@raamaudio.com
I also have a great condition B&M shifter but I took it apart years ago to swap out the springs to stiffer ones but seem to have lost them. I will sell as is or get some springs from them.
ram@raamaudio.com
I also have a great condition B&M shifter but I took it apart years ago to swap out the springs to stiffer ones but seem to have lost them. I will sell as is or get some springs from them.