AFR 205 Heads for LS1/LS6
#1
AFR 205 Heads for LS1/LS6
Up for sale are some great condition AFR 205 heads. They were installed right out of the box with no milling, and I drove with them for 10k miles. I lost cylinder 7, and when I swapped the motor I went with a full stock longblock ls6. I had a cylinder head shop local to me crack check and do a refresh on these heads so I could be confident that when I sold them they would be 100% ok. I also had the valve seals replaced. He checked all of the valve seats and guides and it is ready to go! before being checked, they were at 66cc (as they come out of the box). They were cleaned up and trued flat so they might be a little below 66, but not much. Springs are good to .600 lift, and you can get upgraded springs from AFR for higher lift cams.
These heads were awesome, I really enjoyed the tremendous amount of grunt they provided. definitely a top performing head for the LS1/6.
The pictures should speak for themselves.
$1750 plus shipping $1600 SHIPPED Located in Ann Arbor, Michigan
These heads were awesome, I really enjoyed the tremendous amount of grunt they provided. definitely a top performing head for the LS1/6.
The pictures should speak for themselves.
$1750 plus shipping $1600 SHIPPED Located in Ann Arbor, Michigan
Last edited by kunkelb2; 06-06-2013 at 01:44 PM.