PARTING OUT 3 Vettes: 03 Z06, 01 Vert, 99 Coupe
#761
Supporting Vendor
Thread Starter
Member Since: May 2010
Location: Bell Buckle, TN
Posts: 6,811
Received 232 Likes
on
134 Posts
St. Jude Donor '11
Sold out. We will have new ones in stock soon.
Varraram is sold. Dual HVAC controller is $169.
is that a verraram on the black one ? price ? also need a climate control for an 02 Z06
Jerry
racerx47772@yahoo.com
Jerry
racerx47772@yahoo.com
#763
Pro
Do you have the drink holder lid? I have the insert. I'm also looking for the 4 small ***** on the radio for adjusting balance, fade, treble, and base. Also, do you have the older style HVAC module - the one with the 3 big ***** and 4 buttons? Thanks!
#764
I need a 1998 or so power steering pump with reservoir. reservoir bracket and pulley. I do not need the ps lines to rack and from rack.
email me edward.coss@gmail.com
#765
Supporting Vendor
Thread Starter
Member Since: May 2010
Location: Bell Buckle, TN
Posts: 6,811
Received 232 Likes
on
134 Posts
St. Jude Donor '11
I need a 1998 or so power steering pump with reservoir. reservoir bracket and pulley. I do not need the ps lines to rack and from rack.
email me edward.coss@gmail.com
#766
Racer
Marc, Im looking for the front inner fender liners where the factory brake ducts go through for my 01 z06 mine have been cut and the factory brake ducts wont stay in place. Looking for both sides shipped to 23322. Thanks
#767
im looking for a drivers side headlight assembly
I hav e a white 97 vette. im looking for the drivers side headlight assembly
We just finished parting the 03 Z06, the 01 Vert is 50% done and the 99 Coupe will be here in a few days.
Z06 Seats $795
Z06 Torque Tube $495
AT 4L60 w/58k $588
3.15 Rear Diff $395
This is just to get the thread started. What ever your looking for let me know.
marc@vettenuts.net
615-896-6100
www.vettenuts.net
Just pulled these from the 01 Vert w/TPS and Michelin PS.
$1150 shipped
Z06 Seats $795
Z06 Torque Tube $495
AT 4L60 w/58k $588
3.15 Rear Diff $395
This is just to get the thread started. What ever your looking for let me know.
marc@vettenuts.net
615-896-6100
www.vettenuts.net
Just pulled these from the 01 Vert w/TPS and Michelin PS.
$1150 shipped
#768
Supporting Vendor
Thread Starter
Member Since: May 2010
Location: Bell Buckle, TN
Posts: 6,811
Received 232 Likes
on
134 Posts
St. Jude Donor '11
We just sold a complete white one. We do have them in stock but would need paint. Complete Assembly for $395 shipped.
#770
Racer
Marc is looks to be the complete liner is the only way to get it. How much for left and right shipped to 23322? Thanks
#771
Supporting Vendor
Thread Starter
Member Since: May 2010
Location: Bell Buckle, TN
Posts: 6,811
Received 232 Likes
on
134 Posts
St. Jude Donor '11
If all that is missing is the front section we can cut you what you need and fiberglass them back in. Thats much easier than replacing the entire assembly. Let me know if that will work. Send me pictures of what you have to my screen name.
#776
Racer
Marc mine are intact still just the holes were made bigger for an aftermarket brake cooling duct and I put the stock ducts in and they will not hold in place anymore cause of the bigger holes. So yes i could possibly just replace the front section and fiberglass them in.
#777
Supporting Vendor
Thread Starter
Member Since: May 2010
Location: Bell Buckle, TN
Posts: 6,811
Received 232 Likes
on
134 Posts
St. Jude Donor '11
#779
Supporting Vendor
Thread Starter
Member Since: May 2010
Location: Bell Buckle, TN
Posts: 6,811
Received 232 Likes
on
134 Posts
St. Jude Donor '11
#780
We have them in stock located here: http://www.vettenuts.net/index.php?l...t_detail&p=911
Order placed!