FS: Custom HuMount LED Radio Plate, Stereo, Dash Bezel
08-28-2014, 02:30 PM
#1
Burning Brakes
Thread Starter
FS: Custom HuMount LED Radio Plate, Stereo, Dash Bezel
The following items are available for sale:
1. Sony Xplod CDX-GT930ui Receiver
This stereo is great, in wonderful condition, original packaging will be included, plays CD's, MP3's, has Auxiliary port, USB port, great sound
Paid $139, selling for: $60 shipped
2. Stock C5 E-Brake handle
It's in OK condition (the leather could be in better condition, but it's fully functional and I'm selling it cheap)
Selling for: $20 shipped
1. Sony Xplod CDX-GT930ui Receiver
This stereo is great, in wonderful condition, original packaging will be included, plays CD's, MP3's, has Auxiliary port, USB port, great sound
Paid $139, selling for: $60 shipped
2. Stock C5 E-Brake handle
It's in OK condition (the leather could be in better condition, but it's fully functional and I'm selling it cheap)
Selling for: $20 shipped
Last edited by djamigolxr50; 09-04-2014 at 10:09 AM.
09-01-2014, 03:56 PM
#4
Burning Brakes
Thread Starter
The Z06 letters are only blue when lid up. Otherwise they are clear. I have them set up so that they light up/come on as soon as I start the ignition (in other words, they are lid up all the time). However, you can wire them up differently to suit your needs.
Pics added
Pics added
Last edited by djamigolxr50; 09-01-2014 at 04:13 PM.
09-03-2014, 02:32 PM
#9
Burning Brakes
Thread Starter
Radio dash Bezel/shifter console SOLD.
Other items are still available.
New pics added as well
Other items are still available.
New pics added as well
Last edited by djamigolxr50; 09-03-2014 at 02:35 PM.
09-04-2014, 09:29 AM
#11
Burning Brakes
Thread Starter
HUMount installation/wiring instructions:
You will need to trim the plastic tab behind where the factory HU rested so that your HU will slide back far enough.
Attach the red wire to the dimmer wire in the HU wiring harness and attach the black wire to a ground.
Connect all of your wiring for the HU. Using the factory bolts loosely attach the faceplate and backing plate to the factory bolt hole location. Align the faceplate so that the HU is centered in the HU opening in the faceplate and the mount sits centered in the dash opening and tighten the bolts. Reassemble the rest of you dash.
You will need to trim the plastic tab behind where the factory HU rested so that your HU will slide back far enough.
Attach the red wire to the dimmer wire in the HU wiring harness and attach the black wire to a ground.
Connect all of your wiring for the HU. Using the factory bolts loosely attach the faceplate and backing plate to the factory bolt hole location. Align the faceplate so that the HU is centered in the HU opening in the faceplate and the mount sits centered in the dash opening and tighten the bolts. Reassemble the rest of you dash.
