Full Nitrous System with Intake and Standalone.
#1
Instructor
Thread Starter
Member Since: Oct 2009
Location: Chicago IL
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Full Nitrous System with Intake and Standalone.
For sale is a full nitrous system. What is listed is what will come with the kit and all can be shipped at buyers expense. If you pick up locally bottles are 100% filled up. I will take this kit off the car as soon as a serious buyer comes along.
Car went 9.40s with this kit on it and a built 347 which I also have for sale
Nitrous Outlet custom made 1 gallon standalone w/ Aeromotive regulator
Nitrous Outlet 90mm plate system
Custom ported Fast 90mm LSX intake with PBJ & JMB custom plumbed directport system w/ NX shark nozzles
Nitrous Outlet Pro-Flow dual 15lb nitrous bottles
HSW custom smoke fuel & nitrous lines
HSW custom black braided line and fittings
Custom Nitrous Outlet switch panel
DynoTune TPS/Window switch/Dual stage controller
LS2 90MM Custom Ported TB
$2400 obo
Car went 9.40s with this kit on it and a built 347 which I also have for sale
Nitrous Outlet custom made 1 gallon standalone w/ Aeromotive regulator
Nitrous Outlet 90mm plate system
Custom ported Fast 90mm LSX intake with PBJ & JMB custom plumbed directport system w/ NX shark nozzles
Nitrous Outlet Pro-Flow dual 15lb nitrous bottles
HSW custom smoke fuel & nitrous lines
HSW custom black braided line and fittings
Custom Nitrous Outlet switch panel
DynoTune TPS/Window switch/Dual stage controller
LS2 90MM Custom Ported TB
$2400 obo
Last edited by KamilZ06; 01-27-2015 at 09:56 PM.
#6
Instructor
Thread Starter
Member Since: Oct 2009
Location: Chicago IL
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
#12
Instructor
Thread Starter
Member Since: Oct 2009
Location: Chicago IL
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
I can sell it with injectors. if your gonna go with the 347 or 383 I also have Trick Flow heads I can imake you a package deal. These were milled for this nitrous setup. They will come fully assembled with rockers as well.
#14
I got a good deal on a base 99 that needs a few things, but my plan is to turn it into a street and strip car. Instead of heavily modding my low miles z06
#15
Instructor
Thread Starter
Member Since: Oct 2009
Location: Chicago IL
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Here is exactly what I have (the only thing that would not come with this is the oil pan) Injectors and everything else included. With oil pan and fuel rail this is a turn key setup
347ci Full Package Including Headers if you want them
General motors 5.7L block honed to 3.906"
General motors polished 3.622" crankshaft
Diamond 3.905" flat top pistons w/ -2cc valve reliefs
Eagle 6.125” rods w/ ARP 2000 rod bolts
Federal mogul 152M main caps
General motors cam bearings & cleveite rod bearings
Total Seal file to fit moly rings
PBJ adjustable timing set
SLP blackwing cold air intake
Trick Flow 215cc cylinder heads milled .035" to 58cc's
Trick flow 7.50 chromoly hardened pushrods
Cometic MLS 3.945 bore .065" head gaskets
ARP 2000 head studs
GM LS2 hardened timing chain
Harlan Sharp 1.7 roller rockers
PBJ 230/242 .613/.613 113+2 hydraulic camshaft
ASP under-drive crank pulley
SVO "red top" 30lb fuel injectors
Custom ported LS2 90mm throttle-body
Custom ported Fast 90mm LSX intake
Nitrous Outlet 90mm plate system
PBJ & JMB custom plumbed directport system w/ NX shark nozzles
Nitrous Outlet Pro-Flow dual 15lb nitrous bottles
HSW custom smoke fuel & nitrous lines
HSW custom black braided line and fittings
Custom Nitrous Outlet switch panel
DynoTune TPS/Window switch/Dual stage controller
If you will take all of this I can make you a very good deal on everything.
I can part this package out this way for now:
1)Full nitrous kit including the Intake Manifold , TB, Injectors, and Intake.
2)Trickflow Heads
3)Headers
4)Shortblock
#16
Not sure if you want but I have a fully built 347 with around 3K miles on it for this setup along with everything you need. My car went 9.4 with a 1.44 60ft on this setup and never got a chance to go again due to being kicked off the track. This is on stock suspension and full weight. I bet you can get that 99 in the 8s no problem with this setup. Car is running so if you want to check it out you are more than welcome.
Here is exactly what I have (the only thing that would not come with this is the oil pan) Injectors and everything else included. With oil pan and fuel rail this is a turn key setup
347ci Full Package Including Headers if you want them
General motors 5.7L block honed to 3.906"
General motors polished 3.622" crankshaft
Diamond 3.905" flat top pistons w/ -2cc valve reliefs
Eagle 6.125” rods w/ ARP 2000 rod bolts
Federal mogul 152M main caps
General motors cam bearings & cleveite rod bearings
Total Seal file to fit moly rings
PBJ adjustable timing set
SLP blackwing cold air intake
Trick Flow 215cc cylinder heads milled .035" to 58cc's
Trick flow 7.50 chromoly hardened pushrods
Cometic MLS 3.945 bore .065" head gaskets
ARP 2000 head studs
GM LS2 hardened timing chain
Harlan Sharp 1.7 roller rockers
PBJ 230/242 .613/.613 113+2 hydraulic camshaft
ASP under-drive crank pulley
SVO "red top" 30lb fuel injectors
Custom ported LS2 90mm throttle-body
Custom ported Fast 90mm LSX intake
Nitrous Outlet 90mm plate system
PBJ & JMB custom plumbed directport system w/ NX shark nozzles
Nitrous Outlet Pro-Flow dual 15lb nitrous bottles
HSW custom smoke fuel & nitrous lines
HSW custom black braided line and fittings
Custom Nitrous Outlet switch panel
DynoTune TPS/Window switch/Dual stage controller
If you will take all of this I can make you a very good deal on everything.
I can part this package out this way for now:
1)Full nitrous kit including the Intake Manifold , TB, Injectors, and Intake.
2)Trickflow Heads
3)Headers
4)Shortblock
Here is exactly what I have (the only thing that would not come with this is the oil pan) Injectors and everything else included. With oil pan and fuel rail this is a turn key setup
347ci Full Package Including Headers if you want them
General motors 5.7L block honed to 3.906"
General motors polished 3.622" crankshaft
Diamond 3.905" flat top pistons w/ -2cc valve reliefs
Eagle 6.125” rods w/ ARP 2000 rod bolts
Federal mogul 152M main caps
General motors cam bearings & cleveite rod bearings
Total Seal file to fit moly rings
PBJ adjustable timing set
SLP blackwing cold air intake
Trick Flow 215cc cylinder heads milled .035" to 58cc's
Trick flow 7.50 chromoly hardened pushrods
Cometic MLS 3.945 bore .065" head gaskets
ARP 2000 head studs
GM LS2 hardened timing chain
Harlan Sharp 1.7 roller rockers
PBJ 230/242 .613/.613 113+2 hydraulic camshaft
ASP under-drive crank pulley
SVO "red top" 30lb fuel injectors
Custom ported LS2 90mm throttle-body
Custom ported Fast 90mm LSX intake
Nitrous Outlet 90mm plate system
PBJ & JMB custom plumbed directport system w/ NX shark nozzles
Nitrous Outlet Pro-Flow dual 15lb nitrous bottles
HSW custom smoke fuel & nitrous lines
HSW custom black braided line and fittings
Custom Nitrous Outlet switch panel
DynoTune TPS/Window switch/Dual stage controller
If you will take all of this I can make you a very good deal on everything.
I can part this package out this way for now:
1)Full nitrous kit including the Intake Manifold , TB, Injectors, and Intake.
2)Trickflow Heads
3)Headers
4)Shortblock
Where are you located?
How much for the set up?
And were you running this set up with an auto?
Last edited by Qkslvrc5z; 01-30-2015 at 08:55 AM.
#17
Instructor
Thread Starter
Member Since: Oct 2009
Location: Chicago IL
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
#19
Instructor
Thread Starter
Member Since: Oct 2009
Location: Chicago IL
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
#20