ccw 505a's f/s
#1
Racer
Thread Starter
ccw 505a's f/s
well I picked these up with out doing my own research and came to realize they won't work on my car with the eradispeed +2 rotors. they are 18/19 in standard c6 fitment. I was told they had less 4,000 on them. the rubber is falken and looks almost brand new. 245's in front/ 285's in the rear. there are no marks at all on any of the wheels. I am located in Lancaster pa and will drive a bit to deliver or help with shipping. asking $2400
* due to the c6 fitment you may want to run a small spacer in the rear. I was told they fit a c5 fine but when mounted on my car the rears appeared to be inboard a little as seen in the pic below
* due to the c6 fitment you may want to run a small spacer in the rear. I was told they fit a c5 fine but when mounted on my car the rears appeared to be inboard a little as seen in the pic below
#14
Racer
Thread Starter
#18
Melting Slicks
Do you know the backspacing, off set and inner barrel size of the wheels, and would you be interested in a partial trade with a set of custom painted "spiral gray metalic" factory C6 Grand Sport wheels 18x9.5 front 19x12 rears
[/URL]
[/URL]
#19
Racer
Thread Starter
As far as the trade I may be interested depending on the price. I have no idea about the back spacing or offset other than they are base c6 specs
#20
Melting Slicks
Can you measure the inside of the barrel at the smallest point I need to see if it will clear my brakes.... The fronts are what concern me as far as clearance this is the only reason why I need to get rid of the wheels I have