Kooks 1 & 7/8 headers, 3 x 2.5" x and mid pipe and TI exhaust
#1
ISIS SUCKS FAT CHOAD
Thread Starter
Kooks 1 & 7/8 headers, 3 x 2.5" x and mid pipe and TI exhaust
ok I'm selling this stuff because I bought 2" headers 3x3 x pipe and 3" aftermarket exhaust. for my supercharged C5Z
UPDATE: headers and exhaust gone.
X pipe
Still available.
Forsale
7/8 Kooks Long Tubes, 3" x 2.5" X Pipe and Factory Ti Exhaust for a set of Kooks 2" Primary's , new X Pipe and an LG Big 3 Exhaust.
These headers aren't perfect in looks but they function just fine. The previous owner of the car had the air fittings cut off these and welded closed. In fact the entire exhaust system came on the car when I bought it. The headers were never coated (though they could be) the X pipe does have a dent in the tube running to the passenger side muffler but, both the headers and x pipe despite their looks and the dent in the x pipe perform as intended. I made well over 900 whp through this exhaust system. It sounds great at WOT and is nice and calm at idle and part throttle. The exhaust is still under the car but I can remove it relatively quick.
Id like to sell the headers, x & mid pipe and exhaust as a package deal for $1,000 plus actual shipping.
The headers should be relatively Normal on what it would cost to ship. But the x pipe (which can't be broken down because it's welded instead of band clamped) and the Uncut Ti exhaust are going to be pricy to ship via UPS or FedEx.
I think the best and most const effective way for me to ship it will be to make a box myself and ship through the greyhound bus station.
Individual price would be
$600 for the headers.
$200 for the 3" x 2.5" X pipe
And $400 for the Ti exhaust
Plus actual shipping.
Like I said these headers and components aren't shiny nor are they coated with big dollar coatings but they most certainly work. (Note I did my best to cure the headers but since the vht is so new it may smoke a bit when you bolt these on and fire the car up. It's not a big deal it will stop after a heat cycle or two.
UPDATE: headers and exhaust gone.
X pipe
Still available.
Forsale
7/8 Kooks Long Tubes, 3" x 2.5" X Pipe and Factory Ti Exhaust for a set of Kooks 2" Primary's , new X Pipe and an LG Big 3 Exhaust.
These headers aren't perfect in looks but they function just fine. The previous owner of the car had the air fittings cut off these and welded closed. In fact the entire exhaust system came on the car when I bought it. The headers were never coated (though they could be) the X pipe does have a dent in the tube running to the passenger side muffler but, both the headers and x pipe despite their looks and the dent in the x pipe perform as intended. I made well over 900 whp through this exhaust system. It sounds great at WOT and is nice and calm at idle and part throttle. The exhaust is still under the car but I can remove it relatively quick.
Id like to sell the headers, x & mid pipe and exhaust as a package deal for $1,000 plus actual shipping.
The headers should be relatively Normal on what it would cost to ship. But the x pipe (which can't be broken down because it's welded instead of band clamped) and the Uncut Ti exhaust are going to be pricy to ship via UPS or FedEx.
I think the best and most const effective way for me to ship it will be to make a box myself and ship through the greyhound bus station.
Individual price would be
$600 for the headers.
$200 for the 3" x 2.5" X pipe
And $400 for the Ti exhaust
Plus actual shipping.
Like I said these headers and components aren't shiny nor are they coated with big dollar coatings but they most certainly work. (Note I did my best to cure the headers but since the vht is so new it may smoke a bit when you bolt these on and fire the car up. It's not a big deal it will stop after a heat cycle or two.
Last edited by MVP'S ZO6; 04-01-2015 at 10:02 PM. Reason: Added new pics of cleaned, primed and vht flameproofed.
#15
#16
Le Mans Master
I just talked with mvp he's working on his car now, he said tell you he's in San Diego. Ready to sell
#17
#19
Le Mans Master
#20
ISIS SUCKS FAT CHOAD
Thread Starter
Sorry for the delayed responses. Between school, my kids parent teacher conference and working on the car, I had about 5 private messages today alone on the headers and x pipe. Definitely and increase from the 3 average Ive been getting per day.
I have a local sale pending on Saturday.
LT1, it was actually in my plan to clean them up then add some high heat primer and finish to
them, then throw them in the oven this weekend to cure the new coating.
If the sale falls through this weekend, I'll do exactly that but I will slightly raise the price at that point as well.
Thanks to all for the inquiries. I will keep everyone posted.
Mike
I have a local sale pending on Saturday.
LT1, it was actually in my plan to clean them up then add some high heat primer and finish to
them, then throw them in the oven this weekend to cure the new coating.
If the sale falls through this weekend, I'll do exactly that but I will slightly raise the price at that point as well.
Thanks to all for the inquiries. I will keep everyone posted.
Mike