FS: 6-rib Flip Drive System
#1
FS: 6-rib Flip Drive System
I am selling my 6-rib flip drive system. Comes with Innovators West 10-rib overdrive balancer w/ 6 rib rear, 6-rib capable flip drive, ZR1 AC compressor, C5 AC bracket. This system solves the alternator slipping issue on most builds to about 1000hp. Asking $1200
Last edited by Bad News; 03-29-2015 at 02:03 AM.
#4
Ok so anser a few question which seem to come up a lot in PM's. Yes this is a complete kit. No other parts or machine work is required to install it. The flip drive is a Cartek unit modified by East Coast Supercharging to accept a 6-rib ac drive belt. The ac compressor is an oem ZR1 compressor as it comes from the factory with a 6-rib pulley. The balancer is a 10-rib overdrive balance again modified by ESC to allow for the 6-rib ac drive belt. The reason for this kit over the standard flip drive is the on higher hp build is has been found that the 4-rib belt slips and causes voltage drop due to the alternator slipping. To buy everything new would cost almost $2,200 ($789.00 for the flip drive, $575 for the balancer, $500 for the 6-rib machine work, & $300 for the compressor.)