Discounted Radioflyer SLC V3 headlight kits (6 spots available)
05-08-2015, 07:48 AM
#1
Supporting Vendor
Thread Starter
Discounted Radioflyer SLC V3 headlight kits 10 sets available
Of the last production run, several of the lenses are not quite perfect. The lenses have minor imperfections in them where a tiny piece of floating debris got caught between the mold and the material during thermoforming. (see attached photos. The ones with the worst defects are shown) The lenses are structurally sound and the imperfections do not affect performance.
These lenses will be sold with otherwise perfect kits for a base price of $1050 (normally $1200)
Should you install your kit and later decide to upgrade to perfect lenses, we have that option available.
We currently have 10 spots open for these defective kits. Ship time is est 1-2 weeks from time of order.
When installed the kit will look like this:
And perform like this:
Defective lens sample
If you are interested in a purchase from here:
http://shop.radioflyerinnovations.co...lights-007.htm
Then at checkout use the coupon code "DiscLensSLC" to get your discount
These lenses will be sold with otherwise perfect kits for a base price of $1050 (normally $1200)
Should you install your kit and later decide to upgrade to perfect lenses, we have that option available.
We currently have 10 spots open for these defective kits. Ship time is est 1-2 weeks from time of order.
When installed the kit will look like this:
And perform like this:
Defective lens sample
If you are interested in a purchase from here:
http://shop.radioflyerinnovations.co...lights-007.htm
Then at checkout use the coupon code "DiscLensSLC" to get your discount
Last edited by TheRadioFlyer; 07-10-2015 at 08:37 AM.
05-25-2015, 01:47 AM
#3
Memorial Day bump
06-19-2015, 07:17 AM
#5
Burning Brakes
06-19-2015, 12:49 PM
#6
Drifting
Of the last production run, several of the lenses are not quite perfect. The lenses have minor imperfections in them where a tiny piece of floating debris got caught between the mold and the material during thermoforming. (see attached photos. The ones with the worst defects are shown) The lenses are structurally sound and the imperfections do not affect performance.
These lenses will be sold with otherwise perfect kits for a base price of $1050 (normally $1200)
Should you install your kit and later decide to upgrade to perfect lenses, we have that option available.
We currently have 6 spots open for these defective kits. Ship time is est 1-2 weeks from time of order.
When installed the kit will look like this:
And perform like this:
Defective lens sample
If you are interested in a purchase from here:
http://shop.radioflyerinnovations.co...lights-007.htm
Then at checkout use the coupon code "DiscLensSLC" to get your discount
These lenses will be sold with otherwise perfect kits for a base price of $1050 (normally $1200)
Should you install your kit and later decide to upgrade to perfect lenses, we have that option available.
We currently have 6 spots open for these defective kits. Ship time is est 1-2 weeks from time of order.
When installed the kit will look like this:
And perform like this:
Defective lens sample
If you are interested in a purchase from here:
http://shop.radioflyerinnovations.co...lights-007.htm
Then at checkout use the coupon code "DiscLensSLC" to get your discount
Thanks
Last edited by BodaciousBlue; 06-19-2015 at 05:43 PM.
07-01-2015, 12:46 PM
#8
Racer
angel eyes
Do you have any pictures of the angle eyes option? Is it available in combination with the halo option and are both operational with the parking lights and headlights?
07-01-2015, 04:25 PM
#9
Supporting Vendor
Thread Starter
They can be wired to come on with either DRL/Turn signals, or with parking/headlights. Here is a photo
07-10-2015, 01:55 PM
#11
Racer
LEDs
What I'm refering to is an led strip across the top of the lense and down one side like an upside down L. Kind of like the glow in the picture.
07-10-2015, 02:30 PM
#12
Supporting Vendor
Thread Starter
The LED DRL strip to which you are referring is no longer offered. We can supply the parts (48cm switchback LED strip with switchback controller) to do this modification if you wish ($100 extra) however we no longer do this modification.
07-12-2015, 07:22 PM
#13
Racer
Ok was there a problem that you no longer offer this mod? If I purchase the parts can I run the LED DRL mod and the Halo option together off the DRL swiitch? If so what happens when I switch to headlight do they stay on or go off? do you have a picture of the LED DRL mod installed?
07-13-2015, 07:46 AM
#14
Supporting Vendor
Thread Starter
Ok was there a problem that you no longer offer this mod? If I purchase the parts can I run the LED DRL mod and the Halo option together off the DRL swiitch? If so what happens when I switch to headlight do they stay on or go off? do you have a picture of the LED DRL mod installed?
you can run halos and the LED strip together (in fact we have a couple of switchback halos as well we could sell) Shoot me an email and I'll send you pictures and we can discuss your project at greater length: radioflyer97@gmail.com
07-18-2015, 07:23 AM
#16
Supporting Vendor
Thread Starter
Tinting the headlight is possible, but not recommended as it will reduce light output as well as possible cause excessive heat buildup on the part of the lens in front of the projector (which MAY cause warping)
07-18-2015, 09:24 PM
#17
Racer
Slc-v3
With our goal of being able to streamline production of these lights, the LED strip modification was VERY time consuming and had to be done by hand so we decided to stop offering this option.
you can run halos and the LED strip together (in fact we have a couple of switchback halos as well we could sell) Shoot me an email and I'll send you pictures and we can discuss your project at greater length: radioflyer97@gmail.com
you can run halos and the LED strip together (in fact we have a couple of switchback halos as well we could sell) Shoot me an email and I'll send you pictures and we can discuss your project at greater length: radioflyer97@gmail.com
07-22-2015, 07:41 AM
#18
Supporting Vendor
Thread Starter
07-23-2015, 05:50 PM
#19
Racer
07-23-2015, 06:02 PM
#20
Supporting Vendor
Thread Starter