[FS] Parting out '04 MSG Coupe
#1
Advanced
Thread Starter
Member Since: May 2011
Location: Wenatchee Washington
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
[FS] Parting out '04 MSG Coupe
Unfortunately, my 2004 Medium Spiral Gray coupe was recently totaled and it is time to part her out. Everything but the motor is still up for grabs. I will list everything as it gets pulled, although I am in the middle of re-landscaping my back yard so work on the Vette has slowed down. If there is anything on the car that you know you will want, shoot me a PM and I can expedite pulling it. I am located in Central Washington and spend a decent amount of time in the Seattle area so I could easily deliver to a large portion of the state. I am more than willing to ship, although buyer will cover shipping prices.
As for prices, I am really just estimating how much things are worth, if I am asking for way too much (or too little, although I don't expect to get warned of that) I would really appreciate a PM letting me know and I will adjust prices accordingly. The parts listed now are what I have pictures of, I have a lot more already pulled that just need to be cleaned up and have pictures taken, they will be listed in a few hours when I get home from work.
Part pictures can be found here.
All prices OBO:
Driver side door, 5% tint on window (a few scratches): $175 ($250 with door control module) - DEAL PENDING
Driver side door control module: $100
Driver side door panel: $90 - SOLD
Passenger side door, 5% tint on window (slight ding near back of window from when it got broken into): $150 ($225 with door control module)
Passenger side door control module: $100
Passenger side door panel: $90 - SOLD
Complete rear hatch, 5% tint (a few minor dings, pictured): $300
Texas Speed and Performance 1 3/4" long tube headers (approx 50k miles): $400 - DEAL PENDING
Texas Speed and performance cat-less X-pipe (approx 50k miles): $250 - DEAL PENDING
Black center console cut for double-din installation and w/ hole drilled for electric cutout switch: $150 - SOLD
MSG targa Top, excellent condition: $800
Tinted targa top, excellent condition (will post pictures tonight): $800
Leather targa top case (will post pictures tonight): $50
HVAC controller (dim display fix completed): $100 - SOLD
MAF sensor: $75
Taillight housing (x2): $25 each or $40 for both
Coolant reservoir: $50
Windshield wiper fluid reservoir: $30
More pictures can be found in this album, also where I will be adding more pictures to as I go along.
Again, I will be adding to this list as I get more parts pulled, but if there is something that you know you need just shoot me a PM and I will expedite pulling it for you. I already have to motor pulled, so there really is not much more left for me to do to have this thing completely parted out - just need to drop the torque tube and rear end.
Thank you for reading this post and let me know of any questions!
6/25/15 Added:
[B]MGW Short Throw Shifter - $200 - SOLD [B]
Fog light/trunk release switch - $15 - SOLD
Active Handling/Selective ride switch - $20
Passenger and driver seats and seatbelts - SOLD
EBCM - SOLD
Torque Tube - SOLD
Bell housing - SOLD
Front and rear suspension cradles - SOLD
Frame rails - SOLD
TAC Module - SOLD
Gas Pedal - SOLD
As for prices, I am really just estimating how much things are worth, if I am asking for way too much (or too little, although I don't expect to get warned of that) I would really appreciate a PM letting me know and I will adjust prices accordingly. The parts listed now are what I have pictures of, I have a lot more already pulled that just need to be cleaned up and have pictures taken, they will be listed in a few hours when I get home from work.
Part pictures can be found here.
All prices OBO:
Driver side door, 5% tint on window (a few scratches): $175 ($250 with door control module) - DEAL PENDING
Driver side door control module: $100
Driver side door panel: $90 - SOLD
Passenger side door, 5% tint on window (slight ding near back of window from when it got broken into): $150 ($225 with door control module)
Passenger side door control module: $100
Passenger side door panel: $90 - SOLD
Complete rear hatch, 5% tint (a few minor dings, pictured): $300
Texas Speed and Performance 1 3/4" long tube headers (approx 50k miles): $400 - DEAL PENDING
Texas Speed and performance cat-less X-pipe (approx 50k miles): $250 - DEAL PENDING
Black center console cut for double-din installation and w/ hole drilled for electric cutout switch: $150 - SOLD
MSG targa Top, excellent condition: $800
Tinted targa top, excellent condition (will post pictures tonight): $800
Leather targa top case (will post pictures tonight): $50
HVAC controller (dim display fix completed): $100 - SOLD
MAF sensor: $75
Taillight housing (x2): $25 each or $40 for both
Coolant reservoir: $50
Windshield wiper fluid reservoir: $30
More pictures can be found in this album, also where I will be adding more pictures to as I go along.
Again, I will be adding to this list as I get more parts pulled, but if there is something that you know you need just shoot me a PM and I will expedite pulling it for you. I already have to motor pulled, so there really is not much more left for me to do to have this thing completely parted out - just need to drop the torque tube and rear end.
Thank you for reading this post and let me know of any questions!
6/25/15 Added:
[B]MGW Short Throw Shifter - $200 - SOLD [B]
Fog light/trunk release switch - $15 - SOLD
Active Handling/Selective ride switch - $20
Passenger and driver seats and seatbelts - SOLD
EBCM - SOLD
Torque Tube - SOLD
Bell housing - SOLD
Front and rear suspension cradles - SOLD
Frame rails - SOLD
TAC Module - SOLD
Gas Pedal - SOLD
Last edited by J_B; 03-31-2016 at 05:59 AM.
#2
Unfortunately, my 2004 Medium Spiral Gray coupe was recently totaled and it is time to part her out. Everything but the motor is still up for grabs. I will list everything as it gets pulled, although I am in the middle of re-landscaping my back yard so work on the Vette has slowed down. If there is anything on the car that you know you will want, shoot me a PM and I can expedite pulling it. I am located in Central Washington and spend a decent amount of time in the Seattle area so I could easily deliver to a large portion of the state. I am more than willing to ship, although buyer will cover shipping prices.
As for prices, I am really just estimating how much things are worth, if I am asking for way too much (or too little, although I don't expect to get warned of that) I would really appreciate a PM letting me know and I will adjust prices accordingly. The parts listed now are what I have pictures of, I have a lot more already pulled that just need to be cleaned up and have pictures taken, they will be listed in a few hours when I get home from work.
All prices OBO:
Driver side door, 5% tint on window (a few scratches): $175 ($250 with door control module)
Driver side door control module: $100
Driver side door panel: $90
Passenger side door, 5% tint on window (slight ding near back of window from when it got broken into): $150 ($225 with door control module)
Passenger side door control module: $100
Passenger side door panel: $90
Complete rear hatch, 5% tint (a few minor dings, pictured): $300
Texas Speed and Performance 1 3/4" long tube headers (approx 50k miles): $400
Texas Speed and performance cat-less X-pipe (approx 50k miles): $250
Black center console cut for double-din installation and w/ hole drilled for electric cutout switch: $150
MSG targa Top, excellent condition: $800
Tinted targa top, excellent condition (will post pictures tonight): $800
Leather targa top case (will post pictures tonight): $50
HVAC controller (dim display fix completed): $100
MAF sensor: $75
Taillight housing (x2): $25 each or $40 for both
Coolant reservoir: $50
Windshield wiper fluid reservoir: $30
More pictures can be found in this album, also where I will be adding more pictures to as I go along.
Again, I will be adding to this list as I get more parts pulled, but if there is something that you know you need just shoot me a PM and I will expedite pulling it for you. I already have to motor pulled, so there really is not much more left for me to do to have this thing completely parted out - just need to drop the torque tube and rear end.
Thank you for reading this post and let me know of any questions!
As for prices, I am really just estimating how much things are worth, if I am asking for way too much (or too little, although I don't expect to get warned of that) I would really appreciate a PM letting me know and I will adjust prices accordingly. The parts listed now are what I have pictures of, I have a lot more already pulled that just need to be cleaned up and have pictures taken, they will be listed in a few hours when I get home from work.
All prices OBO:
Driver side door, 5% tint on window (a few scratches): $175 ($250 with door control module)
Driver side door control module: $100
Driver side door panel: $90
Passenger side door, 5% tint on window (slight ding near back of window from when it got broken into): $150 ($225 with door control module)
Passenger side door control module: $100
Passenger side door panel: $90
Complete rear hatch, 5% tint (a few minor dings, pictured): $300
Texas Speed and Performance 1 3/4" long tube headers (approx 50k miles): $400
Texas Speed and performance cat-less X-pipe (approx 50k miles): $250
Black center console cut for double-din installation and w/ hole drilled for electric cutout switch: $150
MSG targa Top, excellent condition: $800
Tinted targa top, excellent condition (will post pictures tonight): $800
Leather targa top case (will post pictures tonight): $50
HVAC controller (dim display fix completed): $100
MAF sensor: $75
Taillight housing (x2): $25 each or $40 for both
Coolant reservoir: $50
Windshield wiper fluid reservoir: $30
More pictures can be found in this album, also where I will be adding more pictures to as I go along.
Again, I will be adding to this list as I get more parts pulled, but if there is something that you know you need just shoot me a PM and I will expedite pulling it for you. I already have to motor pulled, so there really is not much more left for me to do to have this thing completely parted out - just need to drop the torque tube and rear end.
Thank you for reading this post and let me know of any questions!
#6
Advanced
Thread Starter
Member Since: May 2011
Location: Wenatchee Washington
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
#9
Advanced
Thread Starter
Member Since: May 2011
Location: Wenatchee Washington
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Yes they are, although I will need to cut them from my exhaust. They are DMH Performance cutouts, I can't find the same style on their site anymore but I've attached a picture of what they looked like new. Will get a current picture up soon.
#12
#20
Advanced
Thread Starter
Member Since: May 2011
Location: Wenatchee Washington
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Sorry to everyone that was waiting for a response yesterday - ended up going out of town for a day. Center console is GONE. Also, deal pending on the diff.
Seats are slightly worn in spots, will post pictures when I can.
Sorry, no. Would like to sell the targa tops as a whole.
Visors available.
Don't think I have a PM from you?
Seats are slightly worn in spots, will post pictures when I can.
Sorry, no. Would like to sell the targa tops as a whole.
Visors available.
Don't think I have a PM from you?