[B]RENNEN FORGED MONOBLOC Wheels[/B]
#1
Intermediate
Thread Starter
[B]RENNEN FORGED MONOBLOC Wheels[/B]
Thanks for taking a look. I bought these wheels from a vendor here on the Corvette Forums, and I sadly can't say I ever even got a chance to put tires on the wheels before life went to crap. So, here they are for sale. They are immaculate (thanks for the nice wheels Paul, sorry about the lack of photos) and can be placed back into the boxes I received them in and shipped if need be. I am asking 2500 for the set, I'm pretty sure I paid more like 2800 after the concave option and such, and I don't think it would be fair to try and make money on the forum from other gearheads. They're charcoal, made to order specifically for the C5 Z06, 18x9 front, 19x11 rear. I can't find any of the backspacing info, but as I bought them from a vendor here on the forum, I'm nearly 100% certain that they're made to fit the C5, but might fit the C4 or C6 nicely as well.
Photo taken prior to shipment to my door, thanks Paul.
Packed from vendor.
Rennen Forged MonoBloc
Boxed ready to ship.
These aren't scrapes, they're smears in the thick paint done during the painting process.
Photo taken prior to shipment to my door, thanks Paul.
Packed from vendor.
Rennen Forged MonoBloc
Boxed ready to ship.
These aren't scrapes, they're smears in the thick paint done during the painting process.
#4
Racer
The following users liked this post:
raingram70 (07-15-2016)
#6
and on the 1% chance they aren't C5 offsets who pays the return shipping..?
#7
Intermediate
Thread Starter
Once sold, they're sold. I bought them for an 03 Z06. If they don't fit, I'll give the buyer the contact info or they can easily find them here in the Vendors. I didn't make them, and I didn't give specific offsets for a custom build, either. I said "gimme that style for my car in 18/19's, gunmetal gray please" and relied on their expertise in the matter. I'll point at Paul, in other words.
#8
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 343,010
Received 19,305 Likes
on
13,977 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Good looking set of brand new wheels. GLWS.
#11
Intermediate
Thread Starter
Front weighs 21.5 lbs, Rear weighs 23.5 lbs. I also did some rather butch measurements for offset, and it would appear the front offset from the mounting surface to the edge of the rim is 174mm for the front, 205mm for the rear. Hope this helps alleviate some concerns about fitment. Please keep in mind this was done with a top notch tool, a yardstick from ACE and a piece of aluminum bar stock.
#14
Intermediate
Thread Starter
Concord, NH. I'm simply in a state of disbelief about my life. Eyeballing it would appear to be 420mm across the center with a cheap yardstick and 45 year old eyes. Best I can do.
#16
hang in there, I hope things somehow get better for you.