RPM 4L65E with trans brake for C5 Corvette 1000hp
02-01-2017, 08:08 PM
#1
RPM 4L65E with trans brake for C5 Corvette 1000hp
Just for reference this is a 4L60E trans, 4L65 just means 5 gear planetarys. Direct bolt in to any C5 corvette
Trans is 100% fresh and Clean and ready to go!! The pic of the case with RPM decals and id stamps is to prove it was a RPM, case is now re painted fresh black so the RPM decal is removed but the id stamps still on the case
Started as a lvl 6 RPM 4L65 with rossler trans brake, i got the tranny in a car I bought. Trans was just apart for a total freshen up and full build with all the best parts. Trans Was built up by Diablo Formula Racing in ephrata PA (check him out on youtube) with all new clutches, steels, band, sonnax smart drum with billet input shaft and billet 300m out put shaft and the rest of the parts that make it a "lvl 10 Trans" . Has rossler Trans brake and is fully automatic. I just spent over $1500 on upgrade parts alone. Trans is finished and ready to ship trans will be fine for HP in the 1000hp range.
Crazy cheap prices! Trans gaurenteed perfect! Check my 50+ trader feedback score on LS1Tech under same name !!
$2650for Trans/aftermarket cooler and AN lines to mount cooler in front
Price drop $2400 shipped to business!!!
Trans build list
Every piece and part cleaned and inspected
Case was blasted, freshly painted black
RPM 3-4 clutch pack
Sonax smart sunshell
Sonax roller clutch race
Sonax thrust bearing
GM wide 29 element sprag
4L65E low roller clutch
Billet 4th gear servo
Transgo HD-2 shift kit
Corvette Servo
Wide 2-4 band
Seal & gasket kit
GM and transtar seals and gaskets
Billet over-run piston
GM 5 pinion planetary gearsets - front and rear
300m Billet output shaft
RPM Billet 2nd gear servo
Sonax smart tech input drum (big fix for 4L60)
Sonax 300M Billet Input shaft
Sonax pump rotor
Sonax Billet Forward Piston
Sonax 2-3 HD Apply Valve
Sonax billet pinless accumulator pistons
Deep Aluminum pan
Rossler Trans brake and button
Trans is 100% fresh and Clean and ready to go!! The pic of the case with RPM decals and id stamps is to prove it was a RPM, case is now re painted fresh black so the RPM decal is removed but the id stamps still on the case
Started as a lvl 6 RPM 4L65 with rossler trans brake, i got the tranny in a car I bought. Trans was just apart for a total freshen up and full build with all the best parts. Trans Was built up by Diablo Formula Racing in ephrata PA (check him out on youtube) with all new clutches, steels, band, sonnax smart drum with billet input shaft and billet 300m out put shaft and the rest of the parts that make it a "lvl 10 Trans" . Has rossler Trans brake and is fully automatic. I just spent over $1500 on upgrade parts alone. Trans is finished and ready to ship trans will be fine for HP in the 1000hp range.
Crazy cheap prices! Trans gaurenteed perfect! Check my 50+ trader feedback score on LS1Tech under same name !!
$2650for Trans/aftermarket cooler and AN lines to mount cooler in front
Price drop $2400 shipped to business!!!
Trans build list
Every piece and part cleaned and inspected
Case was blasted, freshly painted black
RPM 3-4 clutch pack
Sonax smart sunshell
Sonax roller clutch race
Sonax thrust bearing
GM wide 29 element sprag
4L65E low roller clutch
Billet 4th gear servo
Transgo HD-2 shift kit
Corvette Servo
Wide 2-4 band
Seal & gasket kit
GM and transtar seals and gaskets
Billet over-run piston
GM 5 pinion planetary gearsets - front and rear
300m Billet output shaft
RPM Billet 2nd gear servo
Sonax smart tech input drum (big fix for 4L60)
Sonax 300M Billet Input shaft
Sonax pump rotor
Sonax Billet Forward Piston
Sonax 2-3 HD Apply Valve
Sonax billet pinless accumulator pistons
Deep Aluminum pan
Rossler Trans brake and button
Last edited by yoshgixxer; 02-10-2017 at 08:57 PM.
02-13-2017, 06:53 PM
#15
Instructor
So, does this thing still shift on its' own? I'm planning a Pro Charger build and didn't plan to get the transmission until next winter, but at this price.... But, I intend to install a higher stall torque converter this summer and if this transmission will act just like the stock one (I push the pedal, it does the gear changes for me) then I may have to make a trip to pick this up and install it at the same time.
Edit: Apparently I can't read anymore. I see at the top that you say it is fully automatic. What is your ZIP code?
Edit: Apparently I can't read anymore. I see at the top that you say it is fully automatic. What is your ZIP code?
Last edited by Brad Kirby; 02-13-2017 at 06:54 PM. Reason: I can't read
02-13-2017, 09:47 PM
#18
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 342,590
Received 19,187 Likes
on
13,911 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Items sold, thread closed.
