FS: '03 OEM high polished wheels, tires, sensors
#1
Safety Car
Thread Starter
Member Since: Oct 2002
Location: Austin TX
Posts: 4,434
Likes: 0
Received 0 Likes
on
0 Posts
Cruise-In IV Veteran
Cruise-In V Veteran
Cruise-In VI Veteran
St. Jude Donor '03-'04-'05
FS: '03 OEM high polished wheels, tires, sensors
These are the original factory high polished wheels, centercaps, sensors (sensors are compatible with '01-'04 C5s), and tires that came with my '03 coupe. These have approximately 7500 miles on them. The wheels are in good condition, no curb rash, but there is a little bit of a residual scar where the original clamp-on wheel weights were. I had them rebalanced with stick-on wheel weights a few months after I bought the car. They have not been driven through any roadsalt. The rear tires are mostly gone, but you can probably get a few more thousand miles out of them if you take it easy. The front tires have about half their tread left. The tires have never been punctured or driven in run-flat mode.
$1100 shipped ground to the contiguous 48.
Pics: all 4
the left front:
the right front:
the left rear:
the right rear:
the tread of the front tires:
the tread of the rear tires:
For full sized pictures (approx 2.5MB each), follow
http://www.jamisonhome.net/~gtc/03wheels/118_1851.JPG
http://www.jamisonhome.net/~gtc/03wheels/118_1852.JPG
http://www.jamisonhome.net/~gtc/03wheels/118_1853.JPG
http://www.jamisonhome.net/~gtc/03wheels/118_1854.JPG
http://www.jamisonhome.net/~gtc/03wheels/118_1855.JPG
http://www.jamisonhome.net/~gtc/03wheels/118_1856.JPG
http://www.jamisonhome.net/~gtc/03wheels/118_1858.JPG
$1100 shipped ground to the contiguous 48.
Pics: all 4
the left front:
the right front:
the left rear:
the right rear:
the tread of the front tires:
the tread of the rear tires:
For full sized pictures (approx 2.5MB each), follow
http://www.jamisonhome.net/~gtc/03wheels/118_1851.JPG
http://www.jamisonhome.net/~gtc/03wheels/118_1852.JPG
http://www.jamisonhome.net/~gtc/03wheels/118_1853.JPG
http://www.jamisonhome.net/~gtc/03wheels/118_1854.JPG
http://www.jamisonhome.net/~gtc/03wheels/118_1855.JPG
http://www.jamisonhome.net/~gtc/03wheels/118_1856.JPG
http://www.jamisonhome.net/~gtc/03wheels/118_1858.JPG
Last edited by GTC; 08-02-2004 at 08:39 AM.
#2
Team Owner
If (and I know its a big if) you get a buyer for the tires and sensors... I may be interested in the wheels.
I already have 2 sets of tires and your sensors wont work with my car...
I already have 2 sets of tires and your sensors wont work with my car...
#4
Le Mans Master
Member Since: Feb 2001
Location: West "By God" Virginia
Posts: 6,700
Received 333 Likes
on
140 Posts
CI 7-8-9-10 Veteran
Wish you would have posted 2 weeks ago, just bought a set for my bro's SS with 1/2 worn out tires for almost the same $$. Good Luck with the sale, and yeh, how many vettes do you have sitting around?
#5
Safety Car
Thread Starter
Member Since: Oct 2002
Location: Austin TX
Posts: 4,434
Likes: 0
Received 0 Likes
on
0 Posts
Cruise-In IV Veteran
Cruise-In V Veteran
Cruise-In VI Veteran
St. Jude Donor '03-'04-'05
Originally Posted by bsmith
If (and I know its a big if) you get a buyer for the tires and sensors... I may be interested in the wheels.
I already have 2 sets of tires and your sensors wont work with my car...
I already have 2 sets of tires and your sensors wont work with my car...
BTW, I have 3 vettes at the moment. It is killing my budget, but I'm having some fun. Unfortunately, my supercharged black vette smoked through some drag radials very quickly. Trying to sell some old parts to help offset the cost of some new tires.
#9
Intermediate
Member Since: Jul 2002
Location: Welland Ontario
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
I might be interested in your wheels. However, I have a few questions that hopefully you would be able to answer.
Do these rims fit on any year C5? (ie. my 1998) ....or do you need spacers etc?
Also, would you know if the sensors from my wagon wheels would fit and be operable on your wheels?
What are the size of the rear tires?
Thanks
Mike
Do these rims fit on any year C5? (ie. my 1998) ....or do you need spacers etc?
Also, would you know if the sensors from my wagon wheels would fit and be operable on your wheels?
What are the size of the rear tires?
Thanks
Mike
#11
Safety Car
Thread Starter
Member Since: Oct 2002
Location: Austin TX
Posts: 4,434
Likes: 0
Received 0 Likes
on
0 Posts
Cruise-In IV Veteran
Cruise-In V Veteran
Cruise-In VI Veteran
St. Jude Donor '03-'04-'05
Originally Posted by ndC4spd
I might be interested in your wheels. However, I have a few questions that hopefully you would be able to answer.
Do these rims fit on any year C5? (ie. my 1998) ....or do you need spacers etc?
Also, would you know if the sensors from my wagon wheels would fit and be operable on your wheels?
What are the size of the rear tires?
Thanks
Mike
Do these rims fit on any year C5? (ie. my 1998) ....or do you need spacers etc?
Also, would you know if the sensors from my wagon wheels would fit and be operable on your wheels?
What are the size of the rear tires?
Thanks
Mike
Yes, these wheels will fit a 98 just fine, as well as any 97-04 vette. No spacers or anything required. They'll bolt right up. With this type of wheel, the lugnuts are exposed. You may want to buy a set of shiny lugnuts to complement these wheels.
Yes, the 97-00 pressure sensors can be installed in these wheels without any issues. Though the older style sensors are a little larger than the 01-04 sensors, they fit in open air space of the wheel. I assume that they would need to rebalance the wheels after unmounting the tires and swapping the sensors around.
The rear tires are the OEM Goodyear EMT tires in 275/40R18.
#13
Team Owner
This'll make you sick...if I had $1100 to spare right now I would get them to autocross...AND I am just up in Olive Branch and could pick up.... Bad Timing...Go DAWGS!!!! TTT For Ya
(State Alum)
(State Alum)