HP tuners Pro: turn off knock sensors?
05-09-2007, 12:40 PM
#1
Drifting
Thread Starter
HP tuners Pro: turn off knock sensors?
Hi guys!
My car runs pretty bad and I am getting the P 0327 code which concerns the knock sensor.
Before getting a new one, I'd like to check if the driveability issues go away when they are turned off.
Can it be done? If so how do I do it?
Sorry or the newb questions, I am still learning the software!
.
My car runs pretty bad and I am getting the P 0327 code which concerns the knock sensor.
Before getting a new one, I'd like to check if the driveability issues go away when they are turned off.
Can it be done? If so how do I do it?
Sorry or the newb questions, I am still learning the software!
.
.
05-09-2007, 11:48 PM
#4
Drifting
Thread Starter
As for now, I don't understand anything I see
.
05-10-2007, 05:18 AM
#5
Le Mans Master
Member Since: Aug 2005
Location: CA.
Posts: 5,255
Likes: 0
Received 281 Likes
on
258 Posts
St. Jude Donor '13-'14-'15
With My EFILIVE I took a look and couldn't find any single table that would disable the knock sensors---However--I found 49 tables in the knock retard file !!!! Really a huge file---My guess would be the knock sensitivity table and the knock frequency table would be a good starting point-I 've used these to get rid of false knock before and they worked pretty well--not sure about how to entirely delete KR or if i would even do it----
05-11-2007, 09:00 PM
#6
Burning Brakes
Member Since: Nov 2004
Location: Grafton Ohio
Posts: 822
Likes: 0
Received 0 Likes
on
0 Posts
Just go into your max kr table and set everything to zero then load the file. At least then the sensor will not pull any timing since the table is zeroed out.
Jer.
Jer.
10-25-2014, 10:23 PM
#8
Good info
Last edited by blown81bu; 10-25-2014 at 11:09 PM.
