LS Valve Spring Kit SALE - Corvette Forum

Go Back   Corvette Forum > C5 Corvettes, 1997 - 2004 > C5 Scan & Tune
Log In 
Register FAQ Search Today's Posts Mark Forums Read Vendor Directory
Search

C5 Scan & Tune
Corvette Onboard Diagnostics, Service Advice, Dyno Tuning, Fuel Management, Tuning Software, LS1 Edit, AutoTap, Diablo

LS Valve Spring Kit SALE

Reply
 
 
 
 
Thread Tools Search this Thread
Old 02-28-2012, 12:29 PM   #1
coSPEED
Supporting Vendor
St. Jude Donor '10
 
coSPEED's Avatar
 
Member Since: Dec 2004
Posts: 916
Thanked 2 Times in 2 Posts
Default LS Valve Spring Kit SALE

Lunati LS Dual Valve Spring Kits

Click the image to open in full size.

The LS Dual Valve Spring Kits come complete with dual valve springs, retainers, spring locators, locks and valve seals that are ready for drop-in installation on many popular LS applications. Using a Signature Series Valve Spring, Lunati engineers have developed new wear-favorable, lightweight alloy steel retainers and locators. These designs prevent* chafing in the spring pockets of aluminum heads, making the combination unbeatable for both serious performance street and drag racing. Other features include:

• Locks equipped with inner bead locks; 7 interference angle between locks and retainers causes the locks to clamp valve stems more tightly
• Valve seals are made from Viton synthetic rubber and are steel jacketed to guarantee seals remain tight around guides and are protected from springs
• Viton material is ideal for resisting heat and aggressive racing oil additives that cause swelling and distortion




CURRENT DISCOUNT COUPON CODES


If you have any questions, please e-mail or call us as we do not frequent CORVETTE FORUM and may not answer any posts in a timely manner. Thank you.

Last edited by coSPEED; 08-14-2014 at 10:24 PM.
coSPEED is offline   Reply With Quote
Old 02-28-2012, 12:29 PM   #2
coSPEED
Supporting Vendor
St. Jude Donor '10
 
coSPEED's Avatar
 
Member Since: Dec 2004
Posts: 916
Thanked 2 Times in 2 Posts
Default

COMP Cams LS Engine Valve Spring Kits

Click the image to open in full size.

• Kits designed for hydraulic roller cams that include carefully matched Beehive™ Springs, retainers, locks, seals and spring seats
• Kits available with steel, lightweight Tool Steel or titanium retainers
• .600" maximum lift for kits including part #26915 valve springs
• .625" maximum lift for kits including part #26918 valve springs

• Dual spring kits designed for hydraulic roller and some solid roller cams
• Include matched valve springs, retainers, locks, seals and spring seats
• Kits available with lightweight Tool Steel or titanium retainers
• .650" maximum lift for kits including the part #26925 valve spring
• .675" maximum lift for kits including the part #26926 valve spring




CURRENT DISCOUNT COUPON CODES


If you have any questions, please e-mail or call us as we do not frequent CORVETTE FORUM and may not answer any posts in a timely manner. Thank you.

Last edited by coSPEED; 08-14-2014 at 10:24 PM.
coSPEED is offline   Reply With Quote
Old 03-05-2012, 11:09 PM   #3
hxrly
CF Senior Member
 
hxrly's Avatar
 
Member Since: Feb 2012
Posts: 386
Location: El Paso TX
Thanks: 0
Thanked 0 Times in 0 Posts
Default

So which is recommended to replace the stock springs that reportedly fail? 02 Z06 with no intentions to replace cams.
hxrly is offline   Reply With Quote
Old 07-24-2012, 05:29 PM   #4
coSPEED
Supporting Vendor
St. Jude Donor '10
 
coSPEED's Avatar
 
Member Since: Dec 2004
Posts: 916
Thanked 2 Times in 2 Posts
Default

BT Racing LS Dual Valve Spring Kits


Brian Tooley, formerly of TEA, has come out with several dual valve spring kits for LS cylinder heads. With years of experience in LS cylinder head design, Brian now offers the ultimate dual valve spring kits for LS cylinder heads.

The LS Platinum Dual Valve Spring Kit features Polished inner and outer springs, matching titanium retainers, locators, seals and locks. On completely stock heads the springs setup at 160 lbs @ 1.770” installed height, 380 lbs @ .600” lift and 400 lbs @ .650” lift and coil bind at 1.070"

This dual valve spring kit is designed for use with stock rocker arms. Open pressure in endurance applications should be limited to 400 lbs or the valve tips can be damaged. This kit uses OEM locks, stock locks allow valve stem rotation which helps the durability of the valve tips.

Click the image to open in full size.



The LS Max Pressure Dual Valve Spring Kit is designed for heavier roller rockers. They check at 160 lbs @ 1.800”, 420 lbs @ .600” lift and 450 lbs @ .650” lift and coil bind at 1.100". These dual valve spring kits feature excellent durability in maintaining spring pressure.

This dual valve spring kit is designed for use with roller rocker arms, or track only combinations using stock rocker arms. This kit uses OEM locks, stock locks allow valve stem rotation which helps the durability of the valve tips.



CURRENT DISCOUNT COUPON CODES


If you have any questions, please e-mail or call us as we do not frequent CORVETTE FORUM and may not answer any posts in a timely manner. Thank you.

Last edited by coSPEED; 08-14-2014 at 10:24 PM.
coSPEED is offline   Reply With Quote
Old 07-08-2014, 11:25 AM   #5
Larzmat
CF Senior Member
 
Larzmat's Avatar
 
Member Since: Jul 2014
Posts: 223
Location: Santa Cruz CA
Thanks: 0
Thanked 1 Time in 1 Post
Default

Quote:
Originally Posted by hxrly View Post
So which is recommended to replace the stock springs that reportedly fail? 02 Z06 with no intentions to replace cams.
I would be interested in this also.
Larzmat is offline   Reply With Quote
Old 10-22-2014, 03:02 PM   #6
coSPEED
Supporting Vendor
St. Jude Donor '10
 
coSPEED's Avatar
 
Member Since: Dec 2004
Posts: 916
Thanked 2 Times in 2 Posts
Default

Manley NexTek Valve Springs


Manley valve springs are wound from super clean alloy. Each design minimizes stress to ensure long service life with high lift camshafts. Retainers are manufactured in our own double spindle CNC machines to exacting tolerances and precise installed height specifications. Locators are manufactured in our own CNC lathes. Heat treated and black oxided after machining. Valve locks are manufactured in our own Swiss turning centers with rigid control over the all-important angle to ensure precise mating with the retainer.



CURRENT DISCOUNT COUPON CODES


If you have any questions, please e-mail or call us as we do not frequent CORVETTE FORUM and may not answer any posts in a timely manner. Thank you.
coSPEED is offline   Reply With Quote
Go Back   Corvette Forum > C5 Corvettes, 1997 - 2004 > C5 Scan & Tune
Reload this Page LS Valve Spring Kit SALE
 
 
 
Reply


Similar Threads
Thread Thread Starter Forum Replies Last Post
LS Valve Spring Kit SALE coSPEED C5 General 2 01-12-2016 03:22 PM
LS Valve Spring Kit SALE @ coloradoSPEED coSPEED C5 Vendor for Sale 1 01-12-2016 03:22 PM
LS Valve Spring Kit SALE coSPEED C6 Parts for Sale/Wanted 1 01-12-2016 03:22 PM
LS Valve Spring Kit SALE coSPEED C6 Z06 Discussion 7 10-22-2014 03:00 PM
COMP Cams LS1 Rocker Arm Trunion Upgrade SALE coSPEED C5 Tech 16 04-30-2013 02:41 PM


Tags
600, corvetteforum, design, dual, kit, lift, ls, ls1, lunati, nuybs, sale, seals, spring, springs, tea, valve

Thread Tools Search this Thread
Search this Thread:

Click for Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


 

All times are GMT -4. The time now is 07:53 AM.