blown81bu

i just purchased one on craigslist complete for 450 shipped

hard to use?..

mowton

Yes if you know nothing about cars, their sensor operations or tuning, no if you do......what skill level are you starting out at?

Ed M

Gordy M

Join the EFLive forum and read all the information. You would be better to learn how to use the scan function and slowly learn programming. They do have a Calc.vet tuning method of bringing your car to a improved performance provided you still use the MAF. This allows you to do the VE and MAF together.

blown81bu

far from nothing i do all my own work and became a 914 rwhp through an auto vette after tuned by ecs..'
I want to learn to fine tune..check codes..and datalog runs..9.60 so far

i come from the carb thing and was very sucessful in the nmca with my 81 malibu with a blowthrough carb f2 winning 4 nmca titles
8.15@170 and never break w my total steet malibu was pretty good tuning..lol..like my malibu i learned by working with car at track not dyno
google my name
paul ferrucci

thanx

blown81bu

thanx thats a start i should pick it up quick...my car is tuned speed density

mowton

OK, have a fun and safe journey down the tuning road....can be rewarding and frustrating all at the same time but sounds like you will have an easy time at it.

Ed M

blown81bu

thanx ed its not going to be easy